• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.708-713
• /
• 2023

A robust all-fiber nonlinear amplifying loop-mirror-based mode-locked femtosecond laser is demonstrated. Power-dependent nonlinear phase shift in a Sagnac loop enables stable and power-efficient mode-locking working as an artificial saturable absorber. The pump power is adjusted to achieve the lowest intensity noise for stable long-term operation. The minimum pump power for mode-locking is 180 mW, and the optimal pump power is 300 mW. The lowest integrated root-mean-square relative intensity noise of a free-running mode-locked laser is 0.009% [integration bandwidth: 1 Hz-10 MHz]. The long-term repetition-rate instability of a free-running mode-locked laser is 10^-7 over 1,000 s averaging time. The repetition-rate phase noise scaled at 10-GHz carrier is -122 dBc/Hz at 10 kHz Fourier frequency. The demonstrated method can be applied as a seed source in high-precision real-time mid-infrared molecular spectroscopy.

• 한국전문물리치료학회지
• /
• 제14권1호
• /
• pp.11-20
• /
• 2007

The objective of this study was to discern the effects of a balance training program on the performance of lower extremities in order to improve strength (muscle power, flexibility, walking power), balance control and walking ability in the elderly. The subjects selected were aged 65 years and over, with no known relevant medical history that may disturb their balance, and have also been visiting the Gimhae Senior Welfare Center. The variable group consisted of 30 subjects, of whom were people who had been participating in balance training programs (One Leg Standing; OLS, Functional Reach; FR, Timed Get Up and Go; TUG) as an intervention for 8 weeks 3 times per a week. They were examined in order to identify their balance control before and after. The control group consisted of thirty subjects who preferred to exercise without any intervention relating to balance training program. The subjects were measured before and after balance training in order to determine the effectiveness of exercise and the effectiveness of exercise combined with the aid of a Balance Performance Monitor. 1. Mean time on OLS test with left and right sided extremities in the experimental group was 35.44 sec, 42.10 sec longer than control group respectively. In FR tests applied to the left and right side, mean reaching distance was increased up to 5.56 cm, 6.73 cm in experimental group respectively. Mean time on TUG test from a chair in experimental group was decreased to 2.33 sec. 2. Mean value of decline in the level balance control, both left and right side, decreased to 2.24% as examined by the Balance Performance Monitor. Mean scores for sway level after balance training decrease to .98% and for balance control both anterior and posterior directions decreased to mean 1.07% and 1.44%, respectively.

• 한국태양에너지학회 논문집
• /
• 제39권3호
• /
• pp.59-66
• /
• 2019

New and renewable energy forecasts are key technology to reduce the annual operating cost of new and renewable facilities, and accuracy of forecasts is paramount. In this study, we intend to build a model for the prediction of short-term solar power generation for 1 hour to 3 hours. To this end, this study applied two time series technique, ARIMA model without considering seasonality and SARIMA model with considering seasonality, comparing which technique has better predictive accuracy. Comparing predicted errors by MAE measures of solar power generation for 1 hour to 3 hours at four locations, the solar power forecast model using ARIMA was better in terms of predictive accuracy than the solar power forecast model using SARIMA. On the other hand, a comparison of predicted error by RMSE measures resulted in a solar power forecast model using SARIMA being better in terms of predictive accuracy than a solar power forecast model using ARIMA.

• 한국전문물리치료학회지
• /
• 제6권2호
• /
• pp.16-31
• /
• 1999

The purpose of this study was to assess the fatigue in lumbar and abdominal muscles in patients with chronic low back pain compared with normal subjects using spectral analysis with mean power frequency and median power frequency. The experimental group consisted of twenty subjects who had experienced chronic low back pain for over one year after the onset day. A control group consisted of twenty normal subjects with no history of low back pain. All subjects stood in an apparatus to perform sustained contraction in the lumbar and abdominal muscles for 30 seconds with 60% maximal voluntary isometric contraction (MVIC). The resulting electromyographic (EMG) recorded time serial data were transformed into frequency serial data by Fast Fourier Transformation (FFT). The results were as follows: 1) lumbar muscles measured, the frequency change ratio of both median power frequency and mean power frequency was significantly greater for experimental group compared with control group group (p<0.05). In measured two abdominal muscles (inferior rectus abdominis, obliquus externus abdominis) except superior rectus abdominis, the frequency change ratio of both median power frequency and mean power frequency was significantly greater for experimental group compared with control group (p<0.05). 2) In all three (longissimus thoracis, iliocostalis lumborum, multifidus) lumbar muscles measured, the initial frequency value of both median power frequency and mean power frequency was significantly lower for the experimental group compared with the control group (p<0.05). In the two (inferior rectus abdominis, obliquus externus abdominis) abdominal muscles measured (superior rectus abdominis not included), the initial frequency value of both median power frequency and mean power frequency was significantly lower for the experimental group compared with the control group (p<0.05). These results suggest that in patients with chronic low back pain there is a trend for more fatigue to occur in both lumbar and abdominal muscles than in the normal control group. This would seem to suggest that in treatment programs for patients with chronic low back pain, improvement of endurance in all trunk muscles should be considered.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.1-6
• /
• 1998

To achieve fast control action, direct control methods should be used. "Direct Mean Torque Control" (DMTC) combines the good dynamic performance of Direct Torque Control (DTC) with the advantages of inherently constant switching frequency and time equidistant control for implementation in a digital signal processor. Since DMTC is a predictive control algorithm, the model and its correction deserves special investigations. This paper proposes a steady-state Kalman filter which is well suited for fast computation.mputation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.824-829
• /
• 1998

In regard to the very stringent-going requirements applied to power supply systems is nowadays applications, the reliability of typical UPS redundency systems are investigated. Several resonable assumptions are made to build up the probability models. The reliabilities of the typical UPS redundency systems are analysed. Their relating Relaibility and MTTF (Mean Time To Faults) are evaluated. It is resulted in that the MTTF of today's UPS redundency systems is unlikely to be beyond 1,000,000 hours.

• 대한소아치과학회지
• /
• 제24권1호
• /
• pp.301-312
• /
• 1997

The purpose of this study was to evaluate the analgesic effect on pulp induced by pulsed Nd : YAG laser according to the power density, irradiated time and the method of application (Non-contact vs contact) in vivo. Experiments were carried out on 90 volunteers who have sound 4 canines. Each canine was grouped by the intensity and the time of irradiation of pulsed Nd : YAG laser was measured. Mean EPT response(units) was measured at 5 min, 30 min, and 60 min after irradiation with various intensity(1.5-3W, 15-30Hz), irradiated time (1.5min, 3min), and application method (Non-contact and contact). The results were as follows: 1. 5 minutes after irradiation, the mean EPT response(units) was increased by 32 % in the non-contact method and by 35% in the contact method of application. Which showed significant difference in mean EPT response(units) compared to not-lased canine in each groups(P<0.05). 2. The mean EPT response(units) with irradiating condition according to the various laser intensity, and the irradiation time stastically did not show significant difference in each groups as time elapsed. 3. There was no significant difference between the non-contact and contact method in the mean EPT response(units). 4. The mean EPT response(units) returned to the baseline value within 30 miuntes. In regard to the above results, the analgesic effect on pulp induced by pulsed Nd : YAG laser resulted a slight increase of pulpal pain threshold, but it was not as high as to replace the role of drug analgesia as whole. This technique can be used for inducing pulpal analgesia as adjunct to other pain control methods and is needed to develop better analgesic effects.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1804-1814
• /
• 2015

In order to explore the characteristics of electrons in DC negative corona discharge, an improved plasma chemical model is presented for the simulation of bar-plate DC corona discharge in dry air. The model is based on plasma hydrodynamics and chemical models in which 12 species are considered. In addition, the photoionization and secondary electron emission effect are also incorporated within the model as well. Based on this model, electron mean energy distribution (EMED), electron density distribution (EDD), generation and dissipation rates of electron at 6 typical time points during a pulse are discussed emphatically. The obtained results show that, the maximum of electron mean energy (EME) appears in field ionization layer which moves towards the anode as time progresses, and its value decreases gradually. Within a pulse process, the electron density (ED) in cathode sheath almost keeps 0, and the maximum of ED appears in the outer layer of the cathode sheath. Among all reactions, R1 and R2 are regarded as the main process of electron proliferation, and R₂₂ plays a dominant role in the dissipation process of electron. The obtained results will provide valuable insights to the physical mechanism of negative corona discharge in air.

• 공업화학
• /
• 제9권7호
• /
• pp.1004-1010
• /
• 1998

Single-jet 반회분식 결정화 반응기에서 동력투입량, 반응물의 주입시간 및 주입방법등 반응조건의 변화가 란타늄 옥살레이트 결정입자의 반응성 결정화에 미치는 영향에 대해 실험적으로 조사하였다. 란타늄 옥살레이트 결정입자의 크기분포는 반응조건에 관계없이 monomodal 형태의 크기분포를 나타내었으나 평균결정크기는 반응조건에 크게 영향을 받았다. 동력투입량이 증가할수록, 반응물의 주입속도가 빠를수록, 란타늄 옥살레이트의 결정입자크기는 감소하였으나 상대적 유도시간은 증가하였다. 반응물의 주입방법에 있어서 옥살산 용액이 주입되는 경우보다 염화란타늄 용액이 주입되는 경우에 결정입자는 크게 나타났으며 상대적 유도시간은 감소하였다. 그리고 결정입자의 형태는 모두 침상형으로 반응조건의 변화에 크게 영향을 받지 않았다.