• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2108-2113
• /
• 2010

The Long Term Evolution (LTE) system is based on the Orthogonal Frequency Division Multiplexing (OFDM) and relies its channel estimation on the lattice-type pilot samples in the multipath fading channel environment. The estimation of the channel frequency response (CFR) makes use of the least squares estimate (LSE) for each pilot samples, followed by an interpolation both in time- and in frequency-domain to fill up the channel estimates for subcarriers corresponding to data samples. Any interpolation scheme could be adopted for this purpose. Depending on the requirements of the target system, we may choose a simple linear interpolation or a sophisticated one. For any choice of an interpolation scheme, these is a trade-off between estimation accuracy and numerical cost. For those wireless communication systems based on the OFDM and the preamble-type pilot structure, the DFT-based channel estimation and its variants have been successfully. Yet, it may not be suitable for the lattice-type pilot structure, since the pilot samples are not sufficient to provide an accurate estimate and it is known to be sensitive to the location as well as the length of the time-domain window. In this paper, we propose a simple interpolated based on the upsampling mechanism in the multirate signal processing. The proposed method provides an excellent alternative to the DFT-based methods in terms of numerical cost and accuracy. The performance of the proposed technique is verified on a multipath environment suggested on a 3GPP LTE specification.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.387-413
• /
• 1998

Image resampling is of particular interest in digital radiology. When resampling an image to a new set of coordinate, there appears blocking artifacts and image changes. To enhance image quality, interpolation algorithms have been used. Resampling is used to increase the number of points in an image to improve its appearance for display. The process of interpolation is fitting a continuous function to the discrete points in the digital image. The purpose of this study was to determine the effects of the seven interpolation functions when image resampling in digital periapical images. The images were obtained by Digora, CDR and scanning of Ektaspeed plus periapical radiograms on the dry skull and human subject. The subjects were exposed to intraoral X-ray machine at 60kVp and 70 kVp with exposure time varying between 0.01 and 0.50 second. To determine which interpolation method would provide the better image, seven functions were compared; (1) nearest neighbor (2) linear (3) non-linear (4) facet model (5) cubic convolution (6) cubic spline (7) gray segment expansion. And resampled images were compared in terms of SNR(Signal to Noise Ratio) and MTF(Modulation Transfer Function) coefficient value. The obtained results were as follows ; 1. The highest SNR value(75.96dB) was obtained with cubic convolution method and the lowest SNR value(72.44dB) was obtained with facet model method among seven interpolation methods. 2. There were significant differences of SNR values among CDR, Digora and film scan(P<0.05). 3. There were significant differences of SNR values between 60kVp and 70kVp in seven interpolation methods. There were significant differences of SNR values between facet model method and those of the other methods at 60kVp(P<0.05), but there were not significant differences of SNR values among seven interpolation methods at 70kVp(P>0.05). 4. There were significant differences of MTF coefficient values between linear interpolation method and the other six interpolation methods (P< 0.05). 5. The speed of computation time was the fastest with nearest -neighbor method and the slowest with non-linear method. 6. The better image was obtained with cubic convolution, cubic spline and gray segment method in ROC analysis. 7. The better sharpness of edge was obtained with gray segment expansion method among seven interpolation methods.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.363-373
• /
• 2000

It is necessary to employ the interpolation technique to resolve problems, which are associated with the characteristic locus in time-distance space, in the unsteady analysis of pipe flow. Various interpolation methods such as linear timeline interpolation, linear spaceline interpolation, wave speed adjustment, cubic spaceline interpolation and cubic timeline interpolation have been suggested and tested to investigate the interpolation error. Performance of various interpolation techniques was evaluated both a single pipeline and a complex one. The range of error was calculated as the courant number varied between 0 and 1 in a single pipeline. Reorganization of computational element and proper selection of interpolation method are found to be prerequisites for the effective computation of unsteady analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.317-324
• /
• 2000

In this paper, we propose an interpolation technique to rain attenuation data which represents dynamic characteristics by time variations. By using this technique, it is possible to sample the rain attenuation data at an arbitrary time interval, and thus it would play an important role in developing adaptive transmission scheme for countermeasuring rain attenuation. We propose the interpolation technique which can synthesizes rain attenuation data by extracting the most proper parameters required to emulate the dynamic characteristics of rain attenuation. Interpolation results to measured data of I minute time interval will be demonstrated, and it is shown that more exact performance evaluation of adaptive transmission scheme to countermeasure rain attenuation can be achieved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.229-232
• /
• 2000

This research aims at developing a low-cost PC-NC system based on one-CPU and investigating the feasibility of its application to a simple-function lathe. Its hardware consists a two axes motion control board including a 24bit counter, 8253 timer, a 12bit DA converter, DIO board for PLC operation and a PC with Intel Pentium 466MHz. The fundamental real-time MC functions such as G-code interpretation, interpolation, position and velocity control of axes are performed. User programming interface with functions of icon manipulation, tool-path simulation and NC-code generation was implemented. In order to achieve real-time control and safety, axis control, NC interpretation, interpolation and user communication are completely executed during every interrupt interval of I msec.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1E
• /
• pp.11-16
• /
• 2008

In this paper, a pitch cycle waveform (PCW) is extracted, quantized, and interpolated in a time domain to synthesize high-quality speech at low bit rates. The pre-alignment technique is proposed for the accurate and efficient PCW extraction, which predicts the current PCW position from the previous PCW position assuming that pitch periods evolve slowly. Since the pitch periods are different frame by frame, the original PCW is converted into the fixed-dimension PCW using the dimension-conversion method, and subsequently quantized by code-excited linear predictive (CELP) coding. The excitation signal for the linear predictive coding (LPC) synthesis filter is generated using the time-domain interpolation and interlink of the quantized PCW's. The coder operates at 4.2 kbit/s and 3.2 kbit/s depending on the pitch period. Informal listening test demonstrates the effectiveness of the proposed coding scheme.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.79-91
• /
• 2017

The meteorological data of 1 hour interval are required to write a typical weather data for building energy simulation. However, many meterological data are missing and the interpolation method to recover the missing data is required. Especially, lots of meterological data are replicated by linear interpolation method because the changes are not significant. While, the wind velocity fluctuates with the time or locations, so linear interpolation method is not appropriate in interpolation of the wind velocity data. In this study, three interpolation methods, using surrounding wind velocity data, Inverse Distance Weighting (IDW), Revised Inverse Distance Weighting (IDW-r), were analyzed considering the characteristics of wind velocity. The Revised Inverse Distance Weighting method, proposed in this study, showed the highest reliability in restoration of the wind velocity data among the analyzed methods.

• Journal of applied mathematics & informatics
• /
• v.9 no.2
• /
• pp.879-890
• /
• 2002

In this paper we consider open queueing system with a Poisson arrival process which have a finite upper bound on the arrival rate for which the system is stable. Interpolation approximations for quantities of interest, such as moments of the sojourn time distribution, have previously been developed for such systems, utilizing exact light and heavy traffic limits. These limits cannot always be easily computed for complex systems. Thus we consider an interpolation approximation where all of the relevant information is estimated via simulation. We show that all the relevant information can in fact be simultaneously estimated in a single regenerative simulation at any arrival rate. In addition to light and heavy traffic limits, both the quantity of interest and its derivative (with respect to the arrival rate) are estimated at the arrival rate of the simulation. All of the estimates are then combined, using a least squares procedure, to provide an interpolation approximation.

• Journal of applied mathematics & informatics
• /
• v.32 no.1_2
• /
• pp.83-98
• /
• 2014

We reformulate an interpolation-based unique decoding algorithm of AG codes, using the theory of Gr$\ddot{o}$bner bases of modules on the coordinate ring of the base curve. The conceptual description of the reformulated algorithm lets us better understand the majority voting procedure, which is central in the interpolation-based unique decoding. Moreover the smaller Gr$\ddot{o}$bner bases imply smaller space and time complexity of the algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.2
• /
• pp.118-125
• /
• 2014

An approximation of speed of sound in the measurement plane is essential for the inverse estimation of temperature. To this end, an inverse problem relating the measured retarded time data in between set of sensors and actuators array located on the wall is formulated. The involved transfer matrix and its coefficient vectors approximate speed of sound of the measurement plane by using the radial basis function with finite number of interpolation points deployed inside the target field. Then, the temperature field can be reconstructed by using spatial interpolation technique, which can achieve high spatial resolution with proper number of interpolation points. A large number of retarded time data of acoustic paths in between sensors and arrays are needed to obtain accurate reconstruction result. However, the shortage of interpolation points due to practical limitations can cause the decrease of spatial resolution and deterioration of the reconstruction result. In this works, a regeneration for obtaining the additional retarded time data for an arbitrary acoustic path is suggested to overcome the shortage of interpolation points. By applying the regeneration technique, many interpolation points can be deployed inside the field by increasing the number of retarded time data. As a simulation example, two rectangular duct sections having arbitrary temperature distribution are reconstructed by two different data set: measured data only, combination of measured and regenerated data. The result shows a decrease in reconstruction error by 15 % by combining the original and regenerated retarded time data.