• 제어로봇시스템학회논문지
• /
• 제20권10호
• /
• pp.1014-1022
• /
• 2014

In mechatronic systems using electric signals to drive control systems, driving signals including the frequency band of the unwanted signals, such as resonant frequencies and noise frequencies, can affect the accuracy of the controlled system and can cause serious damage to the system due to the resonance phenomenon of the mechatronic system. An LOS (Line of Sight) control unit is used to automatically rotate the gimbal system with a video imaging system generally mounted on modern aerial vehicles. However, it still suffers from natural frequency variation problems due to variations of operational temperature. To prevent degradation in performance, this paper proposes an adaptive filtering technique based on real-time noise analysis and adaptive notch-filtering for LOS control systems, and verifies how our proposed method maintains the LOS stabilization performance. Additionally, this filtering technique can be applied to the image noise filtering of the video imaging system. It is designed to reduce image noises generated by switching circuits or power sources. The details of design procedures of the proposed filtering technique and the experiments for the performance verification are described in this paper.

• Structural Engineering and Mechanics
• /
• 제56권3호
• /
• pp.423-442
• /
• 2015

This study examines the wavelet transform for output-only system identification of ambient excited engineering structures with emphasis on its utilization for modal parameter estimation of high-order and closely-spaced modes. Sophisticated time-frequency resolution analysis has been carried out by employing the modified complex Morlet wavelet function for better adaption and flexibility of the time-frequency resolution to extract two closely-spaced frequencies. Furthermore, bandwidth refinement techniques such as a bandwidth resolution adaptation, a broadband filtering technique and a narrowband filtering one have been proposed in the study for the special treatments of high-order and closely-spaced modal parameter estimation. Ambient responses of a 5-story steel frame building have been used in the numerical example, using the proposed bandwidth refinement techniques, for estimating the modal parameters of the high-order and closely-spaced modes. The first five natural frequencies and damping ratios of the structure have been estimated; furthermore, the comparison among the various proposed bandwidth refinement techniques has also been examined.

• 지질공학
• /
• 제27권4호
• /
• pp.513-518
• /
• 2017

Groundroll is a coherent noise showing dispersive behavior in land seismic-reflection records and its rejection has been a stubborn problem in data processing because they severely degrade the continuities and resolution of reflection signals. Conventional processing schemes of attenuating noises are the kind of frequency filtering (i.e., bandpass and f-k) that uses the Fourier transform (FT) along the entire trace in the time domain. To suppress them in this study, 1D wavelet filtering (WT) that can control time-varying frequency properties is tested and performed in the land-based synthetic and field seismic data. The results are compared to the ones from conventional filtering techniques in terms of continuities and resolution of reflection events. This filtering technique enhanced the reflection events by effectively eliminating the dispersive groundroll and random noises with control of time-scale function on wavelet domain.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.679-687
• /
• 2009

In this paper, a subband filtering and adaptive prediction technique for analyzing harmonics in power systems is presented. In this method, the filter banks are designed to decompose odd and even order harmonics separately. The adaptive prediction has been employed reduce the transient and white noise effect in time varying harmonics detecting and tracking. The frequencies and amplitudes of the decomposed harmonics are estimated by recursive algorithm. To demonstrate the performances of the developed technique, computer simulations to the signal with the time-varying frequency and THD are carried out.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.589-599
• /
• 2024

This study presents the usability of the high-rate single-frequency Precise Point Positioning (SF-PPP) technique based on 20 Hz Global Positioning Systems (GPS)-only observations in detecting dynamic motions. SF-PPP solutions were obtained from post-mission and real-time GNSS corrections. These include the International GNSS Service (IGS)-Final, IGS real-time (RT), real-time MADOCA (Multi-GNSS Advanced Demonstration tool for Orbit and Clock Analysis), and real-time products from the Australian/New Zealand satellite-based augmentation systems (SBAS, known as SouthPAN). SF-PPP results were compared with LVDT (Linear Variable Differential Transformer) sensor and single-frequency relative positioning (SF-RP) solutions. The findings show that the SF-PPP technique successfully detects the harmonic motions, and the real-time products-based PPP solutions were as accurate as the final post-mission products. In the frequency domain, all GNSS-based methods evaluated in this contribution correctly detect the dominant frequency of short-term harmonic oscillations, while the differences in the amplitude values corresponding to the peak frequency do not exceed 1.1 mm. However, evaluations in the time domain show that SF-PPP needs high-pass filtering to detect accurate displacement since SF-PPP solutions include trends and low-frequency fluctuations, mainly due to atmospheric effects. Findings obtained in the time domain indicate that final, real-time, and MADOCA-based PPP results capture short-term dynamic behaviors with an accuracy ranging from 3.4 mm to 8.5 mm, and SBAS-based PPP solutions have several times higher RMSE values compared to other methods. However, after high-pass filtering, the accuracies obtained from PPP methods decreased to a few mm. The outcomes demonstrate the potential of the high-rate SF-PPP method to reliably monitor structural and earthquake-induced ground motions and vibration frequencies of structures.

• ETRI Journal
• /
• 제43권6호
• /
• pp.966-977
• /
• 2021

Filterbank multicarrier with offset quadrature amplitude modulation (FBMC-OQAM) is an attractive alternative to the orthogonal frequency division multiplexing (OFDM) modulation technique. In comparison with OFDM, the FBMC-OQAM signal has better spectral confinement and higher spectral efficiency and tolerance to synchronization errors, primarily due to per-subcarrier filtering using a frequency-time localized prototype filter. However, the filtering process introduces intrinsic interference among the symbols and complicates channel estimation (CE). An efficient way to improve the CE in FBMC-OQAM is using a technique known as windowed frequency domain averaging (FDA); however, it requires a priori knowledge of the window length parameter which is set based on the channel's frequency selectivity (FS). As the channel's FS is not fixed and not a priori known, we propose a k-nearest neighbor-based machine learning algorithm to classify the FS and decide on the FDA's window length. A comparative theoretical analysis of the mean-squared error (MSE) is performed to prove the proposed CE scheme's effectiveness, validated through extensive simulations. The adaptive CE scheme is shown to yield a reduction in CE-MSE and improved bit error rates compared with the popular preamble-based CE schemes for FBMC-OQAM, without a priori knowledge of channel's frequency selectivity.

• 대한음성학회지:말소리
• /
• 제51호
• /
• pp.85-98
• /
• 2004

It is almost impossible to generate the sound field effect in real time with the time-domain linear convolution because of its large multiplication operation requirement. To solve this, three methods are introduced to reduce the number of multiplication operations in this paper. Firstly, the time-domain linear convolution is replaced with the frequency-domain circular convolution. In other words, the linear convolution result can be derived from that of the circular convolution. This technique reduces the number of multiplication operations remarkably, Secondly, a subframe concept is introduced, i.e., one original frame is divided into several subframes. Then the FFT is executed for each subframe and, as a result, the number of multiplication operations can be reduced. Finally, the QFT is used in stead of the FFT. By combining all the above three methods into our final the SFE generation algorithm, the number of computations are reduced sufficiently and the real-time SFE generation becomes possible with a general PC.

• 방송공학회논문지
• /
• 제24권3호
• /
• pp.485-494
• /
• 2019

주파수 변조 방식의 방송 주파수에 동조되는 안테나와 Realtek 사(社)의 RTL2832 칩을 이용하는 디지털 TV용 튜너와 아날로그-디지털 변환기로 구성되는 universal serial bus (USB) 동글을 이용하여 스테레오 주파수 변조 방송의 실시간 수신기를 컴퓨터의 소프트웨어로 구현한다. 아날로그 방송 신호가 USB 동글에서 디지털 신호로 변환되고 이진 데이터를 컴퓨터에서 매트랩 및 파이선 프로그래밍 언어의 신호처리 기법을 이용하여 저역 통과 필터, 대역 통과 필터, 주파수 판별기, 양측파대 진폭 복조, 위상 고정 루프. 샘플링 변환, 디앰퍼시스 등의 기능 블록을 설계한다. 최종적으로 수신기의 실시간 구현을 위하여 파이선 및 C++로 구성되는 그누라디오 (GNU Radio)를 이용하여 수신기 알고리즘을 소프트웨어로 구현한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1979년도 하계 전자.전기연합학술발표회논문집
• /
• pp.164-165
• /
• 1979

Two dimensional kernels which reconstruct the tomographic image from the blurred one formed by simple back-projection are investigated and their performances are compared. These kernels are derived from tile point spread function of the tomographic system and have the form of a ramp filter modified by several window functions to suppress ringing in the reconstruction. Computer simulation using a computer generated phantom image data with different correction functions(kernels) has been carried out. In this simulation, filtering in frequency domain by 2-D FFT technique or in space domain by 2-D direct convolution is considered. It is found that the-computation time required for real space convolution technique is much larger than that of Fourier 2-D filtering technique in the pratical situation.

• 지구물리와물리탐사
• /
• 제15권1호
• /
• pp.23-32
• /
• 2012

저류층 감시(reservoir monitoring)를 위해서는 시간경과(time-lapse) 탄성파 자료들을 비교하는 방법이 주로 사용되며, 시간경과 탄성파자료로부터 저류층에서의 변화에 의한 차이만을 추출해 내는 기술이 핵심이라 할 수 있다. 본 논문에서는 시간경과 탄성파자료로부터 저류층에서의 변화만을 추출하기 위한 방법으로 기존의 교차균등화(crossequalization) 방법과 개선된 최적화 방법을 실험 및 비교해 보았다. 기존의 방법론으로는 주파수 띠폭 균등화(bandwidth equalization)와 위상보정(phase rotation)을 주파수 영역과 시간 영역 그리고 혼합영역에서 각각 구현하여 그 성능을 비교해 보았으며, 이러한 방법들이 갖고 있는 고주파수가 손실되는 한계를 극복할 수 있는 제약적 최적화 필터링(constrained optimum filtering) 방법론을 제안 및 실험해 보았다. 새로이 제안된 제약적 최적화 필터링 방법은 최적화된 맞춤필터를 구함으로써 저류층 변화성분의 주파수띠폭을 넓히는데 개선된 결과를 보여주었다.