• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.38-50
• /
• 2003

본 논문에서는 도선상에서 발생하는 결함 위치와 이상 유무를 감지하는 새로운 고분해능 반사측정법인 시간-주파수 영역반사측정법 (TFDR, Time-Frequency Domain Reflectometry)을 제안하였다. 고전적인 반사측정법들은 단지 시간 또는 주파수의 한 영역에서 분석되어져 왔으나, 본 논문에서 제시한 TFDR은 도선의 결함 위치와 이상 유무를 발견하기 위해 과도신호의 시간과 주파수 영역의 정보를 동시에 이용할 수 있는 시간-주파수 분석기법으로 특성화하였다. TFDR의 기준신호 설계는 측정 케이블의 물리적 성질들을 고려하여 주파수 밴드를 결정하며, 도선의 결함감지와 추정은 시간-주파수 상호상관관계 함수에 의해 이루어진다. TFDR 시스템을 이용하여 여러 결함 상태를 가진 실제 coaxial cable (RG-142, RG-400)에 대해 실험하였고 정확성을 입증하기 위해 TDR (Time Domain Reflectometry) 장비와 성능을 비교하였다. 본 논문에서는 TFDR이 TDR보다 작은 오차로 결함을 찾아냄을 나타내고 있으며, 측정된 정확도는 TFDR의 오차율이 0.5% 이하로 TDR (54750A/54754A) 장비보다 성능이 월등히 우수하다는 것을 알 수 있다.

• 한국지진공학회논문집
• /
• 제24권2호
• /
• pp.103-110
• /
• 2020

Seismic qualification of instruments and devices mounted on electrical cabinets in a nuclear power plant is performed in this study by means of the in-cabinet response spectrum (ICRS). A simple method and two rigorous methods are proposed in the EPRI NP-7146-SL guidelines for generating the ICRS. The simple method of EPRI can give unrealistic spectra that are excessively conservative in many cases. In the past, the time domain analysis (TDA) methods have been mostly used to analyze a structure. However, the TDA requires the generation of an artificial earthquake input motion compatible to the target response spectrum. The process of generating an artificial earthquake may involve a great deal of uncertainty. In addition, many time history analyses should be performed to increase the accuracy of the results. This study developed a numerical analysis program for generating the ICRS by frequency domain analysis (FDA) method. The developed program was validated by the numerical study. The ICRS calculated by FDA thoroughly matched with those obtained from TDA. This study then confirms that the method it proposes can simply and efficiently generate the ICRS compared to the time domain method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.87-94
• /
• 2007

구조물의 동적해석은 크게 시간영역과 주파수영역해석으로 나눌 수 있다. 시간영역해석은 직접적분법과 모드중첩법 등을 사용하며 주파수영역해석은 DFT법을 적용하고 있다. 일반적으로 DFT법은 주기함수에 대한 응답을 산정할 경우 효과적인 해석방법이지만 비주기함수인 경우 정확한 해석결과를 얻을 수 없어 주기를 크게 하거나 응답을 수정하여 해의 정확성을 향상시키고 있다. 따라서 본 연구는 비주기함수인 이동하중을 받는 구조물에 대해 시간영역과 주파수영역에서 동적응답을 산정하였다. 그 결과 구조물의 자유진동주기를 크게 하거나 응답을 수정하여 DFT법을 적용한다면 주파수영역에서도 충분히 정확한 해석결과를 얻을 수 있을 것으로 판단된다.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.250-260
• /
• 2018

A pressure wave created by the photoacoustic effect is affected by the medium and by laser parameters. The effect of these parameters on the generated pressure wave can be seen by solving the photoacoustic wave equation. These solutions which are examined in the time domain and the frequency domain should be considered by researchers in acoustic sensor design. In particular, frequency domain analysis contains significant information for designing the sensor. The most important part of this information is the determination of the operating frequency of the sensor. In this work, the laser parameters to excite the medium, and the acoustic signal parameters created by the medium are analyzed. For the first time, we have obtained solutions for situations which have no frequency domain solutions in the literature. The main focal point in this work is that the frequency domain solutions of the acoustic wave equation are performed and the effects of the frequency analysis of the related parameters are shown comparatively from the viewpoint of using them in acoustic sensor designs.

• 한국수산과학회지
• /
• 제30권1호
• /
• pp.16-30
• /
• 1997

Application of digital filter to the wave analysis is studied using the observed data by wave gauge. Sea wave data obtained from wave gauge always include long wave frequency components. In order to estimate the sea wave parameters, we must re-analyzed wave data by using a digital filter and the concept of mean sea level correction method. By the wave by wave analysis and spectral methods, sea wave parameters on the basis of wave data obtained by the conventional method and digital filter are compared. The best-fitted design filter determined by the necessary conditions of frequency responses, can be obtained by calculating various transfer functions. Thus, to get the best the digital filter design, both Butterworth filter and Savitzky-Golay filter of digital filter are used in the frequency and time domain, respectively. Three cases of observation wave data are calculated by applying digital filter. The components of different frequency bands in the surf zone are coexisted in three cases. The wave data for wind wave components is computed using the digital filter the surf zone and off-surf zone, and based on the filtered data, wave parameters are calculated by the spectral analysis and wave by wave analysis methods, respectively. As a results, when sea wave data observed by wave gauge are analyzed, the Savitzky-Golay method is recommended which can well appear cut-off frequency by experimental choosing filter length in the time domain. The better mean sea level correction method is the Butterworth filter in the frequency domain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1168-1170
• /
• 2000

A half bridge time sharing type high frequency resonant inverter to give VVVF function in the inverter used as power source of induction heating at high frequency is presented in this paper, this paper also realize the output control of independence irrespective of the switching frequency using Phase-Shift. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, the principle of basic operation and the its characteristics are estimated by the parameters, such as switching frequency, the variation of phase angle(${\varphi}$) of Phase-Shift. It is certain that the proposed circuit will be used and expanded in the high frequency power supplies like induction heating systems.

• International Journal of Automotive Technology
• /
• 제5권4호
• /
• pp.257-268
• /
• 2004

The wavelet analysis method is introduced in this paper to study the nonstationary vibration of vehicles. A new road model, a so-called time domain correlated four-wheel road roughness, which considers the coherence relationships between the four wheels of a vehicle, has been newly developed. Based on a vehicle model with eight degrees of freedom, the analysis of nonstationary random vibration responses was carried out in a time domain on a computer. Verification of the simulation results show that the proposed road model is more accurate than previous ones and that the simulated responses are credible enough when compared with some references. Furthermore, by taking wavelet analysis on simulated signals, some substantial rules of vehicle nonstationary vibration, such as the relationship between each vibration level, and how the vibration energy flows on a time-frequency map, beyond those from conventional spectral analysis, were revealed, and these will be of much benefit to vehicle design.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2005년도 추계학술대회 논문집
• /
• pp.302-305
• /
• 2005

Recently, many methods to analyze signal have been proposed and representative methods are the Fourier transform and wavelet transform. In these methods, the Fourier transform represents signal with combination cosine and sine at all locations in the frequency domain. However, it doesn't provide time information that particular frequency occurs in signal and denpends on only the global feature of the signal. So, to improve these points the wavelet transform which is capable of multiresolution analysis has been applied to many fields such as speech processing, image processing and computer vision. And the wavelet transform, which uses changing window according to scale parameter, presents time-frequency localization. In this paper, we proposed a new approach using a wavelet of cosine and sine type and analyzed features of signal in a limited point of frequency-time plane.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.52-57
• /
• 2000

We investigated the fatigue crack propagation of base metal, weld metal and heat attected zone in 316L stainless steel. And we analysed acoustic emission signals during the fatigue test by time-frequency analysis method. The specimens of weld metal and HAZ had longer fatigue life and slower rate of crack propagation better than base metal. And as a result of time-frequency was 200-300 kHz was obtained by fatigue crack propagation and 500 kHz was obtained by dimple and separate of inclusion.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1454-1459
• /
• 2024

Researchers have applied theoretical and CFD models for years to analyze the fluidelastic instability (FEI) of tube arrays in steam generators and other heat exchangers. The accuracy of each approach has typically been evaluated using the discrepancy between the experimental critical flow velocity and the predicted value. In the best cases, the predicted critical flow velocity was within an order of magnitude comparable to the measured one. This paper revisits the quasi-steady approach for damping controlled FEI in a normal triangular array with a pitch ratio of P/d = 1.375. The method addresses the fluidelastic frequency at the stability threshold as an input parameter for the approach. The excellent agreement between the estimated stability thresholds and the equivalent experimental results suggests that the fluidelastic frequency must be included in the quasi-steady analysis, which requires minimal computing time and experimental data. In addition, the model allows a simple time delay analysis regarding flow convective and viscous effects.