• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.80-89
• /
• 2005

In this paper, time-frequency analysis using wavelet packet transform and advanced-MDSA (Multiple Dimensional Spectral Analysis) which based on wavelet packet transform is applied fur fault source identification and diagnosis of early detection of fault non-stationary sound/vibration signals. This method is analyzing the signal in the plane of instantaneous time and instantaneous frequency. The results of ordinary coherence function, which obtained by wavelet packet analysis, showed the possibility of early fault detection by analysis at the instantaneous time. So, by checking the coherence function trend, it is possible to detect which signal contains the major fault signal and to know how much the system is damaged. Finally, It is impossible to monitor the system is damaged or undamaged by using conventional method, because crest factor is almost constant under the range of magnitude of fault signal as its approach to normal signal. However instantaneous coherence function showed that a little change of fault signal is possible to monitor the system condition. And it is possible to predict the maintenance time by condition based maintenance for any stationary or non-stationary signals.

• Structural Engineering and Mechanics
• /
• 제66권2호
• /
• pp.185-193
• /
• 2018

In this study, low- and high-frequency structure behaviors were identified and a systematic analysis procedure was proposed using noisy GPS data from a 165-m-high tower in ${\dot{I}}stanbul$, Turkey. The raw GPS data contained long- and short-periodic position changes and noisy signals at different frequencies. To extract the significant results from this complex dataset, the general structure and components of the GPS signal were modeled and analyzed in the time and frequency domains. Uncontrolled jumps and deviations involving the signal in the time domain were pre-filtered. Then, the signal was converted to the frequency domain after applying low- and high-pass filters, and the frequency and periodic component values were calculated. The spectrum of the tower motion obtained from the filtered GPS data had dominant peaks at a low frequency of $1.15572{\times}10-4Hz$ and a high frequency of 0.16624 Hz, consistent with two equivalent GPS datasets. Then, the signal was reconstructed using inverse Fourier transform with the dominant low frequency values to obtain filtered and interpretable clean signals. With the proposed sequence, processing of noisy data collected from the GPS receivers mounted very close to the structure is effective in revealing the basic behaviors and features of buildings.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.21-28
• /
• 1997

The vehicle handling performances have a close relation with the driver's safety. And the CAT(Computer aided testing) system has been introduced as a powerful tool for improving the handling performances. In this study, a CAT system for effectively measuring and analysing the handling performances is developed based on the windows GUI(Graphic user interface) environment. Especially, in order to derive a lot of significant handling performance parameters from a series of proving ground tests, the CAT system has various functions related to real time measurement, time domain analysis, frequency domain analysis, steady state analysis and so on.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 2003

This paper presents the method for structure borne noise analysis of a flexible body in multibody system. The proposed method is the superposition method using flexible muitibody dynamic analysis and finite element one. This method is executed in 3 steps. In the la step, time dependent quantities such as dynamic loads, modal coordinates ana gross body motion of the flexible body are calculated efficiently through flexible multibody dynamic analysis. And frequency response functions are computed using Fourier transforms of those time dependent quantities. In the 2$\^$nd/ step, acoustic pressure coefficients are obtained through structure-acoustic coupling analysis by finite element analysis. In the final step, frequency responses of acoustic pressure at the acoustic nodes are recovered through linear superposition of frequency response functions with acoustic pressure coefficients. The accuracy of the proposed method is verified in the numerical example of a simple car model.

• 한국실내디자인학회논문집
• /
• 제22권5호
• /
• pp.152-161
• /
• 2013

This study is about the visual appreciation by sex with the analysis of time range of observing data which was got through observation experiment with the space of lobby in hospitals. The observation data of the subjects who observed the space include the frequency and time, through which the process of visual appreciation could be evaluated with the definition of the frequency and the time of observation. First, the fact that men had higher frequency of observation than women means the former had more movement than the latter, and another fact of their fewer times can be understood as the time of their staying was shorter. That is, even though the men had more movements of sight, they showed the feature of staying shorter. Second, the rate high and low of observation frequency and times made it possible for observation characteristics to be defined as 'intensive search' 'active search' 'fixed concentration' and 'search wandering.' The definition of understanding this process of visual appreciation can be available for a frame of effective analysis of observation characteristics according to the passage of time. Third, the intense search is the case of 'high frequency' having the feature of high visual appreciation owing to the active visual actions for acquiring information. Men were found to have more intense search which decreased gradually as time passed, while women showed the feature of many times of intense search. Fourth, it was found that with many observation data in a certain range of time the subjects had fixed concentration, where women were found to have repetitive fixed concentration along with the change of observation time while men were seen to have more observation tendency for fixed concentration. Fifth, at the cross tabulation of frequency and times, men had the feature of dispersed visual appreciation while women had more distinction between fixation and movement, which revealed that there is surely the difference between men and women in the process of visual appreciation.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1197-1220
• /
• 2014

Accurate actuator tracking is critical to achieve reliable real-time hybrid simulation results for earthquake engineering research. The frequency-domain evaluation approach provides an innovative way for more quantitative post-simulation evaluation of actuator tracking errors compared with existing time domain based techniques. Utilizing the Fast Fourier Transform the approach analyzes the actuator error in terms of amplitude and phrase errors. Existing application of the approach requires using the complete length of the experimental data. To improve the computational efficiency, two techniques including data decimation and frequency decimation are analyzed to reduce the amount of data involved in the frequency-domain evaluation. The presented study aims to enhance the computational efficiency of the approach in order to utilize it for future on-line actuator tracking evaluation. Both computational simulation and laboratory experimental results are analyzed and recommendations on the two decimation factors are provided based on the findings from this study.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.239-245
• /
• 2015

In this paper, to examine the difference between the linear and non-linear static, dynamic analysis for a structure, a cantilevered beam was used. Then, an external transverse static and dynamic loads were applied at the free end of the beam. Classical theories were used for the linear analysis and the EDISON CSD solver, co-rotational dynamic FEM program, was used for nonlinear analysis. In the static analysis, effects of the load for the beam deflection were observed in the linear and nonlinear analysis. Then, normalized displacement of tip of the beam was predicted for different frequency ration and a significant difference was obtained in the vicinity of the resonant frequency. In addition, effects of frequency and time for the beam deflection were investigated to find the frequency delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.362-367
• /
• 1996

In this paper, the eigenstructure of a class of linear time varying systems, termed as linear quasi-time invariant(LQTI) systems, is investigated. A system composed of dynamic devices such as linear time varying capacitors and resistors can be an example of the class. To effectively describe and analyze the LQTI systems, a generalized differential operator G is introduced. Then the dynamic systems described by the operator G are studied in terms of eigenvalue, frequency characteristics, stability and an extended convolution. Some basic attributes of the operator G are compared with those of the differential operator D. Also the corresponding generalized Laplace transform pair is defined and relevant properties are derived for frequency domain analysis of the systems under consideration. As an application example, a LQTI circuit is examined by using the concept of eigenstructure of LQTI system. The LQTI filter processes the sinusoidal signals modulated by some functions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.156-162
• /
• 2006

Pipe thinning is one of the major issues for the structural fracture of pipes of nuclear power plants. Therefore a method to inspect a large area of piping systems quickly and accurately is needed. In this paper, we proposed the method for monitoring pipe thinning. Our basic idea come from that a group velocity of impact wave is different as wall thickness. If the group velocity is measured, wall thickness can be estimated. To obtain the group velocity, time-frequency analysis is used. This is because an arrival time difference can be measured easily in time-frequency domain rather than time domain. To test the performance of this technique, experiments have been performed for a plate and U type pipe. Results show that the proposed technique is quite powerful in the monitoring pipe thinning.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.168-174
• /
• 2009

An application of wavelet analysis to power system transient generated signals is presented in this paper. With the time-frequency localisation characteristics embedded in wavelets, the time and frequency information of a waveform can be presented as a visualised scheme. This feature is very important for non-stationary signals analysis such as the ones generated from power system disturbances. Unlike the Fourier transform, the wavelet transform approach is more efficient in monitoring fault signals as time varies. For time intervals where the function changes rapidly, this method can zoom in on the area of interest for better visualisation of signal characteristics.