• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.512-522
• /
• 1996

To provide broadband ISDN service for the users in scattered locations, the application of satellite communications network is seriously considered. To trans mit ATM cells efficiently in satellite communications, it is effective to use TDM A method. However, it is necessary to have a method to compensate the cell delayvari-ation caused by the difference between TDMA and ATM. This paper optimized the cell control time(Tc) when traffic inputs have poisson or markov modulated poisson process by applying cell delay variation characteristics of time stamp method, which has the most advantages among compensation methods or cell delay variation. This paper also intorduces a method of reducing the cell clumping phenomena by adapting discrete time stamp method, including the analysis and evalutation of the range of required quality of CDV distribution by ATM transmission.The result of the experiment shows that CDV distribution-range can be controlled to 1.2$\times$Tc which reduces overall cell delay variation by discrrete time stamp method.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.1093-1104
• /
• 2015

A standard repetitive controller (RC) is theoretically able to replace a bank of resonant controllers in harmonic signals tracking applications. However, the traditional RC has some drawbacks such as a poor dynamic response and a complex structure to compensate grid frequency deviations for an effective unified power quality conditioner (UPQC) control scheme. In order to solve these problems, an improved RC with an outstanding dynamic response and a simplified grid frequency adaptive scheme is proposed for UPQC control systems in this paper. The control strategy developed for the UPQC has delay time, i.e., one-sixth of a fundamental period (T_p/6), repetitive controllers. As a result, the UPQC system can provide a fast dynamic response along with good compensation performance under both nonlinear and unbalanced loads. Furthermore, to guarantee the excellent performance of the UPQC under grid frequency deviations, a grid frequency adaptive scheme was developed for the RC using a simple first order Padé's approximation. When compared with other approaches, the proposed control method is simpler in structure and requires little computing time. Moreover, the entire control strategy can be easily implemented with a low-cost DSP. The effectiveness of the proposed control method is verified through various experimental tests.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.58
• /
• pp.127-148
• /
• 2013

The Rotterdam Rules provide that port terminal operator may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules by invoking the provisions that may provide a defence for, or limit the liability of, the carrier. Consequently the port terminal operator who are involved in the provision of maritime services may avoid or limit their liability for cargo loss, damage or delay in delivery or breach of any other obligation under the Rules. The port terminal operator to be applied for the Himalaya clause under the Rules must show that it has the requisite link with a Contracting State. In addition, the port terminal operator performs service to the period of time between the arrival of the goods at the port of loading and their departure from the port of discharge. The port terminal operator's liability for breaches of its obligation is limited to 875 SDR per package or other shipping units, or 3 SDR per kilogram of the gross weight of the goods. In addition, compensation for delay shall be limited to an amount equivalent to two and one-half times the fright payable on the goods delayed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.42-47
• /
• 2011

The partial product matrix (PPM) of a parallel squarer is symmetric. To reduce the depth of PPM, it can be folded, shifted and rearranged. In this paper, we present an area-efficient squarer design method using new partial product rearrangement. Also, a fixed-width squarer design method of the proposed squarer is presented. By simulations, it is shown that the proposed squarers lead to up to 17% reduction in area, 10% reduction in propagation delay and 10% reduction in power consumption compared with previous squarers. By using the proposed fixed-width squarers, the area, propagation delay and power consumption can be further reduced up to 30%, 16% and 28%, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.7
• /
• pp.592-601
• /
• 2018

The GPS/INS integrated navigation system, which is one of the electronic equipments mounted on military aircraft store, can not directly receive GPS signals by the aircraft wing before the drop, so GPS navigation data is received from the aircraft and used for filter integration, afterwards, the integrated navigation is performed using the GPS information directly received through the antenna. In this case, it is possible to operate the mount in old aircraft without any modification of the aircraft when GPS data is transmitted using wireless. However, the delay occurs while the aircraft navigation data is transmitted to the integrated navigation filter of the aircraft store via wireless, which affects the time synchronization of the GPS measurement and the INS information, affecting the integrated navigation performance. In this paper, an algorithm to analyze and compensate the effect of generation and transmission delay that can occur when implementing GPS/INS integrated navigation system of aircraft store that receives GPS data via wireless.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.215-224
• /
• 1996

Active vibration control is generally used to reduce vibration level by the actuators based on measured signal. Dynamic properties of a structure can be easily modified by the active vibration control, so that the vibration level may be effectively reduced to the magnitude below the allowable limit over a wide frequency rangs. In this paper, an instantaneous optimal control algorithm including acceleration feedback is presented for the active vibration control of large structures considering facts that the acceleration response can be easily measured, but the displacement and velocity response are obtained by numerically integrating the measured acceleration response with some errors. The adverse effect of the time delay is overcomed by taking into account the dynamic characteristics of an actuator and filters in the design of controller. Performance test is carried out using a hydraulic active mass driver on a test structure$(L{\times}W{\times}H;=;1200mm{\times}800mm{\times}1600mm, about;500kg)$ supported by four columns under base excitations. It is confirmed that the vibration level of the test structure are reduced to about 1/6 near resonance.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.665-669
• /
• 2009

When maneuvering a ship in a narrow channel or under bridge, the ship operator may take actions of slowdown engine and altering course in order to avoid possible navigational dangers, which may reduce difficulties on navigation or collsion avoidance against other ship and/or bridge. In this paper, taking notice of the stress caused by these actions of slowdown engine and altering course, survey is carried out for whether it is possible to quantify the stress by time delay as an index. Based on the ship handling simulator experiment, it is verified that difficulty of navigation changes is highly correlated with the time delay, which result from compensation actions of slowdown engine and altering course.

• Smart Structures and Systems
• /
• v.14 no.6
• /
• pp.1005-1030
• /
• 2014

The need for assessing dynamic response of typical industrial piping systems subjected to seismic loading motivated the authors to apply model reduction techniques to experimental dynamic substructuring. Initially, a better insight into the dynamic response of the emulated system was provided by means of the principal component analysis. The clear understanding of reduction basis requirements paved the way for the implementation of a number of model reduction techniques aimed at extending the applicability range of the hybrid testing technique beyond its traditional scope. Therefore, several hybrid simulations were performed on a typical full-scale industrial piping system endowed with a number of critical components, like elbows, Tee joints and bolted flange joints, ranging from operational to collapse limit states. Then, the favourable performance of the L-Stable Real-Time compatible time integrator and an effective delay compensation method were also checked throughout the testing campaign. Finally, several aspects of the piping performance were commented and conclusions drawn.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.136-138
• /
• 2006

Recently, network systems are widely used in several areas, and some considerable attentions have been directed to the Networked Control System(NCS). In NCS, network-induced delays are inevitable, and they sometimes degrade the performance of networked control systems to be a source of potential instability. In this paper, We proposes a compensation method for networked control system subject to network-induced delays by using a simple method, which is based on a sort of predictive strategy. To evaluate its feasibility and effectiveness, a real-time NCS for a rotary inverted pendulum is implemented via an Ethernet. Based on the experimental results. we show that the proposed simple method can be a practical and feasible solution to NCS design.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.385-390
• /
• 2016

ELoran Systems can provide Position, Navigation, and Time services with comparable performance to Global Positioning Systems (GPS) as a back up or alternative system. High timing and navigation performance can be achieved by eLoran signals because eLoran receivers use "all-in-view" reception. This incorporates Time of Arrival (TOA) signals from all stations in the service range because each eLoran station is synchronized to Coordinated Universal Time (UTC). Transmission station information and the differential Loran correction data are transmitted via an additional Loran Data Channel (LDC) on the transmitted eLoran signal such that eLoran provides improved Position Navigation and Timing (PNT) over legacy Loran. In this paper, we propose a technique for adapting the delay time compensation values in eLoran timing receivers to provide precise time comparison. For this purpose, we have designed a system that measures time delay from the crossing point of the third cycle extracted from the current transformer at the end point of the transmitter. The receiver delay was measured by connecting an active H-field, an E-field and a passive loop antenna to a commercial eLoran timing receiver. The common-view time transfer technique using the calibrated eLoran timing receiver improved the eLoran transfer time. A eLoran timing receiver calibrated by this method can be utilized in the field for precise time comparison as a GNSS backup.