• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1592-1597
• /
• 2015

In this study, we developed a fiber-optic temperature sensor (FOTS) based on a silicone oil and an optical time domain reflectometer (OTDR) to apply the measurement of a coolant leakage in the nuclear power plant. The sensing probe of the FOTS consists of a silicone oil, a stainless steel cap, a FC terminator, and a single mode optical fiber. Fresnel reflection arising at the interface between the silicone oil and the single mode optical fiber in the sensing probe is changed by varying the refractive index of the silicone oil according to the temperature. Therefore, we measured the optical power of the light signals reflected from the sensing probe. The measurable temperature range of the FOTS using a Cu-coated silica fiber is from $70^{\circ}C$ to $340^{\circ}C$ and the maximum operation temperature of the FOTS is sufficient for usage at the secondary system in the nuclear power plant.

• Korean Security Journal
• /
• no.27
• /
• pp.161-195
• /
• 2011

As crimes have increased to an extent that the police cannot cope with, there have been continuous discussions for the introduction of Private Investigation (hereafter PI) in Korea. However, attempts to legislate for the introduction of PI have failed every time PI bills for the introduction of PI were proposed. This was fundamentally because arguments both for and against the introduction of PI were sharply divided depending on the priorities. However, regardless of those clash of views, an apparent need for the legislation of PI service has arisen. As Korea opens its service market to other countries through GATS and FTAs, currently existing domestic PI law has been found to be inconsistent with international agreements such as GATS and KOREA-US(KORUS) FTA. This paper found that the Act on Usage and Protection of Credit Information which regulates PI service is inconsistent with the Article 12.4(a)(i) and (iii) of KORUS FTA and the Article 7.11 and the Article 7.13 of KOREA-EU FTA. If Korea does not modify the existing laws and establish new laws in relation to PI, such inconsistencies could lead to international trade disputes which could amount to billions of dollars. In this regard, the passage of the PI bill is necessary.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.43-50
• /
• 2006

Bioreporter bacteria, such as recombinant bioluminescent bacteria, have been used for the detection of specific compounds in complex environmental media. In this study, optimum conditions for the preparation and application of deep-freezed and Iyophilized recombinant bioluminescent strain KG1206 were investigated for the future application on contaminated environmental sites. Genetically engineered microorganism, Pseudomonas putida mt-2 KG1206, contains TOL plasmid and the plasmid inserted $P_{m}$, promoter on the upper part of lux gone in vector pUCD615, and m-toluate and benzoate are considered direct inducers for bioluminescence. Optimum conditions determined for the preparation and application of the deep-freezed and lyophilized strain were followings: cryoprotective agent (24% sucrose), lyophilization time (12 hrs), strain concentration ($OD_{600}=0.6$), reconstitution for freezed strain (quick reconstitution at $35^{\circ}C$), reconstitution for lyophilized strain ($3{\sim}6$ hrs exposure on LB medium), carrying conditions (keep at $20^{\circ}C$ after reconstitution). These results demonstrate the feasibility of deep-freezed or lyophilized state of genetically engineered bioluminescent strain for environmental usage.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.380-384
• /
• 2010

Purpose: Distinguishing different types of implants and assessing the position and size of implants by radiologic exam after orbital wall reconstruction is important in determining the surgery outcome and forecasting prognosis. We observed time-dependent density changes in three types of implants (porous polyethylene, resorbing plate and titanium mesh plate) by performing facial bone CT after orbital wall reconstructions. Methods: A total of 32 patients, who had underwent orbital wall fracture surgery from October 2006 to March 2009 and received facial bone CT as outpatients at 1 postoperative year were included in the study. Follow-up facial bone CT was performed on the patients pre- operatively, 1 month post-operatively, and 1 year post-operatively to observe the status of the orbital implants. Medpor $^{(R)}$ (Porex Surgical, Inc., Newnan, Ga.) was used as porous polyethylene and followed-up in 14 cases; for resorbing plate, Synthes mesh plate (Synthes, Oberdorf, Switzerland) was used in the reconstruction, and followed-up in 11 cases; and titanium mesh plate usage was followed-up in 7 cases. Computed tomographic scan (CT) and water's view were done for radiography, and hounsfield unit (HU) was used to compare density of those facial bone CT. Wilcoxon signed rank test was applied to statistically verify measurement difference in each group of hounsfield units. Results: Facial bone CT examination performed in 1 month post-operative showed that the density of porous polyethylene, resorbing plate and titanium mesh plate were -42.07, 105.67 and 539.48 on average, respectively. Among the three types of implants, titanium mesh plate showed the highest density due to its radiopaque feature. Following up the density of three types of implants in CT during 1 year after the orbital wall fracture surgery, the density of porous polyethylene increased in 10.52 House Field Units and the resorbing plate was decreased in 26.87 HouseField Units. There were no significant differences between densities in 1 month post-operatively and 1 year post-operatively in each group ($p{\geq}0.05$). Conclusion: We performed facial bone CT on patients with orbital fractures during follow-up period, distinguishing the types of implants by the different concentration of implant density, and the densities showed little change even at 1 year post-operative. To observe how implant densities change in facial bone CT, further studies with longer follow-up periods should be carried out.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.537-545
• /
• 2009

The objective of this study was to investigate potential usage of environmentally friendly building materials, liquid mortar and dry cement mortar mixed with charcoal, based on the test of their physical and chemical properties. From the test results of physical and chemical properties of the liquid mortar mixed with charcoal, liquid mortar containing over 20% of charcoal, the consistency viscosity and the non-volatile content met a standard requirement. Drying time was delayed with increase in charcoal contents in the liquid mortar, however they were fully cured within 60 minutes in all treated levels. Other properties were acceptable at standard requirement. From the results, it was found that the proper charcoal addition level to the liquid mortar was 25%. In the results on dry cement, it was found that samples containing 5% of charcoal showed the maximum compressive strength, whereas samples containing over 20% of charcoal did not reach the minimum requirement of KS standard. Water retention ability constantly increased as the charcoal ratio increased. The conventional dry cement mortar adsorbed 59.5% of it, in the test of adsorption rate on ammonia gas, whereas cement mortar containing 10% of charcoal showed 71.6% of ammonia gas adsorption.

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.1
• /
• pp.259-283
• /
• 2018

This research aims at understanding the differences between expert and general users' perceptions regarding publication preferences for Korean classics collations and translations in order to formulate future directions for these materials. For this purpose, an overview of changes in publishing in general as well as current status of collation/translation of Korean classics in particular are being identified. An online questionnaire was carried out in order to collect data regarding perceptions and preferences of expert users and general users of Korean classics. The results are based on the analyses of more than 1,000 responses. The analyses show that electronic books will not completely replace printed books and publishing both electronic and printed books in tandem for the time being is most preferable in order to satisfy varying user needs. Statistical analysis shows differences in terms of use value, value from possession, and readability of electronic and printed books in the two groups of users. However, as for the value of preservation by relevant institutions, there was a statistical difference between two groups towards printed books unlike their electronic equivalents. The research shows strong preference towards printed forms of classics collations and translations for the purpose of scholarly research and translation. Actual usage statistics reveal much heavy use of online database of classics translations compared to the use of available electronic books. For future publishing decisions for classics collations and translations will need to take into consideration of their special characteristics and symbolic nature. Proper representation of these materials into electronic format would require a standardized platform that enable various uses in different environments.

• The Journal of Korean Medical History
• /
• v.25 no.2
• /
• pp.155-193
• /
• 2012

From the part "歷代醫學姓氏(Historic Doctors)" in "醫林撮要(Uirimchualyo)", the following has been noticed and concluded. 1. Because acupuncture was originated from stony needle, the word "石(sok)" contains the meaning of needle, and from this point on, words like 石(sok), 砭石(pyumsok), 箴石(Jamsok), 鑱石(Chamsok) had been derived. 2. The word 砭石(pyumsok) used in "Hwangjenaekyong(Yellow Emperor's Canon of Medicine or Hwangdineijing)" should be interpreted as acupuncture in a verb form, not a noun form. 3. 鑱石(Chamsok) or 鑱鍼(Chamchim) was used for surgical treatment for tumor, by cutting open tumors and pressing the pus out. Therefore, 砭石(pyumsok), 鑱石(Chamsok) are the same kind of needles, and 鑱鍼(Chamchim) is the tool improved from 鑱石(Chamsok) used in the Bronze Age. 4. Kwakpak put a note on 鑱石(Chamsok) in "山海經(Sanhaekyong)" that reads "it is defined as 砥鍼(Jichim) and treats tumor." This let us know the shape of 石(sok), 砭石(pyumsok), 鑱(Chamsok), 鑱鍼(Chamchim), and the stone that can be used as a surgical tool with slim & sharp shape is obsidian. 5. Because obsidian is only found around Mt. Baekdu and limited area in South Korea & Japan in Asia, it is closely related with the life & medical environment of the tribe "Mt. Baekdu". 6. The development of 鑱鍼(Chamchim) was influenced by surgical treatment used in early stage of civilization, and its origin is traced upto Gochosun dynasty. Korea's own traditional medical knowledge is derived from this surgical treatment skill. 7. Because the acupuncture is originated from Gochosun dynasty, 鍼(chim) was derived from 箴(Jam) of 箴石(Jamsok), 䥠(Chim) & 䥠(Chim) both were used for a time being, and finally settled into 鍼(Chim). 8. The word 針(Chim) showed up at Myung dynasty, and started to be used in Korea from early Chosun dynasty. 9. In the early Chosun dynasty, 鍼(Chim) was used for medical term, and 針(Chim) for non-medical term. In the mid Chosun dynasty, 針(Chim) was used as a term for tool, and 鍼(Chim) as a term for acupunctural medical treatment. 10. Under the order of King Sunjo, Dr. Yesoo Yang published "醫林撮要(Uirimchualyo)", added "醫林撮要續集(Sequel to Uirimchualyo)", and added "歷代醫學姓氏(Historic Doctors)" again which eventually made totally 13 books of "醫林撮要(Uirimchualyo)". In addition, many parts of "醫林撮要續集(Sequel to Uirimchualyo)" were quoted in "東醫寶鑑(Donguibogam)", and influenced much in publishing "Donguibogam". 11. In "歷代醫學姓氏(Historic Doctors)" of "醫林撮要(Uirimchualyo)", the same way in "Donguibogam", referred to 針(Chim) as a term for a needle, and 鍼(Chim) as a term for Acupuncture. 12. From the usage of 針(Chim) & 鍼(Chim), shown in "鄕藥集成方(Hyangyakjipsungbang)", "醫林撮要(Uirimchualyo)" and "東醫寶鑑(Donguibogam)", we can notice the spirit of doctors who tried to take over the legitimacy of Korean tradition, and their elaboration & historical view that expresses confidence on our own medical technology, through the wording 鍼(Chim).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.4
• /
• pp.327-336
• /
• 2007

The 3D building modeling is one of crucial components in building 3D geospatial information. The existing methods for 3D building modeling depend mainly on manual photogrammetric processes by stereoplotter compiler, which indeed take great amount of time and efforts. In addition, some automatic methods that were proposed in research papers and experimental trials have limitations of describing the details of buildings with lack of geometric accuracy. It is essential in automatic fashion that the boundary and shape of buildings should be drawn effortlessly by a sophisticated algorithm. In recent years, airborne LiDAR data representing earth surface in 3D has been utilized in many different fields. However, it is still in technical difficulties for clean and correct boundary extraction without human intervention. The usage of airborne LiDAR data will be much feasible to reconstruct the roof tops of buildings whose boundary lines could be taken out from existing digital maps. The paper proposed a method to reconstruct the roof tops of buildings using airborne LiDAR data with building boundary lines from digital map. The primary process is to perform octree-based segmentation to airborne LiDAR data recursively in 3D space till there are no more airborne LiDAR points to be segmented. Once the octree-based segmentation has been completed, each segmented patch is thereafter merged based on geometric spatial characteristics. The experimental results showed that the proposed method were capable of extracting various building roof components such as plane, gable, polyhedric and curved surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.582-590
• /
• 2016

The purpose of this study is to investigate the relationship between suicidal attitude and suicidal ideation of college students and also to provide the fundamental data in order to strengthen both the standard and the recommendation of media coverage in Korea. A total of 249 college students over the age of 18 years in B city and G do were enrolled for this study. The data were collected between June 9 and July 7 of 2014 and analyzed by using descriptive statistics, t-test, ANOVA, Pearson correlation coefficients, and multiple regression with SPSS 21.0. The mean score of a message of suicidal motivation reports 2 was $51.06{\pm}10.55$, which was the highest. The score of suicidal ideation was $10.41{\pm}12.88$. There were sign&ificant differences in suicidal thought with respect to school system, family income, pocket money, time of physical activity, smoking, and smart-phone usage in university students. It was shown that suicidal thoughts were significantly correlated with message of simple suicidal reports 1(r=.303, p<.001), message of suicidal motivation reports 2(r=.251, p<.001), and message of suicidal mourning man reports 3(r=.225, p<.001). As the suicidal attitude have a close association with reports of suicide, it is necessary that studies on a variety of factors influencing suicidal thoughts of students be repeated.

• Journal of KIISE:Databases
• /
• v.33 no.1
• /
• pp.69-85
• /
• 2006

Broadcast has been often used to disseminate the frequently requested data efficiently to a large volume of mobile clients over a single or multiple channels. Conventional concurrency control protocols for mobile transactions are not suitable for the wireless broadcast environments due to the limited bandwidth of the up-link communication channel. In wireless broadcast environments, the server often broadcast different data items with different frequency to incorporate the data access patterns of mobile transactions. The previously proposed concurrency control protocols for mobile transactions in wireless broadcast environments are focused on the mobile transactions with uniform data access patterns. However, these protocols perform poorly when the data access pattern of update mobile transaction are not uniform but skewed. The update mobile transactions with skewed data access patterns will be frequently aborted and restarted due 4o the update conflict of the same data items with a high access frequency. In this paper, we propose an energy-efficient concurrence control protocol for mobile transactions with skewed data access as well as uniform data access patterns. Our protocol use a random back-off technique to avoid the frequent abort and restart of update mobile transactions. We present in-depth experimental analysis of our method by comparing it with existing concurrency control protocols. Our performance analysis show that it significantly decrease the average response time, the amount of upstream and downstream bandwidth usage over existing protocols.