• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.105-108
• /
• 2007

The COMS LRIT/HRIT broadcast service should satisfy the 15 minutes timeliness requirement. The timeliness requirement is an important enough to impact on the overall performance of LHGS. Therefore, the simulation for the LHGS processing was performed with the LHGS prototype in this paper. First, processing time is measured for each process (per modules) of the LHGS without I/O time. Then, the LHGS processing is performed with worst scenario and the processing time is measured. Finally, analyses for processing time and time constraint are performed.

• Structural Engineering and Mechanics
• /
• v.38 no.4
• /
• pp.429-441
• /
• 2011

In large-scale problem, a huge size of computational resources is needed for a reliable solution which represents the detailed description of dynamic behavior. Recently, eigenvalue reduction schemes have been considered as important technique to resolve computational resource problems. In addition, the efforts to advance an efficiency of reduction scheme leads to the development of the multi-level system condensation (MLSC) which is initially based on the two-level condensation scheme (TLCS). This scheme was proposed for approximating the lower eigenmodes which represent the global behavior of the structures through the element-level energy estimation. The MLSC combines the multi-level sub-structuring scheme with the previous TLCS for enhancement of efficiency which is related to computer memory and computing time. The present study focuses on the implementation of the MLSC on the direct time response analysis and the frequency response analysis of structural dynamic problems. For the transient time response analysis, the MLSC is combined with the Newmark's time integration scheme. Numerical examples demonstrate the efficiency of the proposed method.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.23-35
• /
• 2023

Korea Augmentation Satellite System (KASS) is a satellite-based augmentation system (SBAS) that provides approach procedure with vertical guidance-I (APV-I) level corrections and integrity information to Korea territory. KASS is used to monitor navigation performance in real-time, and this paper introduces the design, implementation, and verification process of mission monitoring (MIMO) in KASS. MIMO was developed in compliance with the Minimum Operational Performance Standards of the Radio Technical Commission for Aeronautics for Global Positioning System (GPS)/SBAS airborne equipment. In this study, the MIMO system was verified by comparing and analyzing the outputs of reference tools. Additionally, the definition and derivation method of accuracy, integrity, continuity, and availability subject to MIMO were examined. The internal and external interfaces and functions were then designed and implemented. The GPS data pre-processing was minimized during the implementation to evaluate the navigation performance experienced by general users. Subsequently, tests and verification methods were used to compare the obtained results based on reference tools. The test was performed using the KASS dataset, which included GPS and SBAS observations. The decoding performance of the developed MIMO was identical to that of the reference tools. Additionally, the navigation performance was verified by confirming the similarity in trends. As MIMO is a component of KASS used for real-time monitoring of the navigation performance of SBAS, the KASS operator can identify whether an abnormality exists in the navigation performance in real-time. Moreover, the preliminary identification of the abnormal point during the post-processing of data can improve operational efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1076-1081
• /
• 2007

In this paper, we propose a new switch structure for time division duplex(TDD) system. The existing TDD structure utilizes a circulator fur isolation characteristic between ports. However, the circulator produces intermodulation distortion signals which are undesired signal because of its nonlinear properties. The proposed circuit is composed of a modified branch-line hybrid coupler which controls the signal flow while the isolated port is open-/short- terminated. In order to prove the validity of the presented structure, the switch circuit is fabricated and measured at 2.3GHz, the center frequency of Wibro service system.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.467-470
• /
• 2013

We propose a blind feedforward phase noise mitigation method in the time-domain for a coherent optical orthogonal frequency division multiplexing (CO-OFDM) systems. By exploiting the redundancy of the cyclic prefix (CP), the proposed scheme acquires the overall phase noise difference information during an OFDM block and attempts to mitigate the phase noise in the time domain using a linear approximation. The proposed algorithm mitigates common phase error (CPE) and inter-carrier-interference (ICI) due to phase noise simultaneously, improving the system performance, especially when decision-directed equalizers are used. The simulation results demonstrate the effectiveness of the proposed feedforward phase noise mitigation approach in time domain.

• Journal of Biomedical Engineering Research
• /
• v.34 no.4
• /
• pp.204-211
• /
• 2013

In this paper, an algorithm for suppressing acoustic noises contained in stethoscope sound is proposed and implemented in real-time using an embedded DSP system. Sound collected by stethoscope is down-sampled and band-pass filtered, and later an NLMS adaptive filter is used to cancel the acoustic noise induced from external noise sources. Also, the unpredictable impulsive noises due to fabric friction and instantaneous tapping are detected using the SD-ROM algorithm, and suppressed using an algorithm approximating the morphology filter. The proposed algorithm was tested using signals collected with a digital stethoscope mockup, and implemented on an ARM920T-based DSP system.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.327-337
• /
• 2005

Accelerated life test models and procedure are developed to assess the reliability of Door switch. The main function of door switch is to operate bulb lamp and fan motor. The accelerated life test method and test equipments are developed using the relationship between stresses and life characteristics of the products. Using the developed accelerated life test method, the parameters of the ALT model and life time distribution are estimated and the reliability of the Door S/W at use condition if assessed. The proposed accelerated life test method and procedure may be extended and applied to testing similar kinds of products to reduce test time and costs of the tests remarkably.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.19-24
• /
• 2002

User-friendly-web-based database system for searching creep property data was developed. This system includes about 38000 creep data for 270 different materials including low carbon steel, stainless steel and alloy steel. Data on creep rupture, creep deformation, creep crack growth and creeping materials can be searched through this system. Retrieved data is displayed in numeric form and also presented in graphical form for visualizing the data. Furthermore, the creep rupture data is designed to be fitted to a regression equation of logarithmic stress using time-temperature parameter(TTP). The degree of the regression equation, orthogonal polynomials, was determined using analysis of variance.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.306-307
• /
• 2015

본 논문에서는 ATSC (Advanced Television Systems Committee) 3.0 시스템을 위한 LDM (Layered Division Multiplexing) 기술을 제안하고, 그 성능을 전산실험을 통해 분석한다. 제안된 LDM 시스템은 기존의 TDM (Time Division Multiplexing) / FDM (Frequency Division Multiplexing) 기술에 비해 약 3 에서 9 dB 의 성능 이득을 나타낸다.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.48-52
• /
• 2004

In this letter, we consider a new packet scheduling algorithm for an orthogonal frequency division multiplexing access/frequency division duplex (OFDMA/FDD)-based system, e.g., mobile broadband wireless access or high-speed portable internet systems, in which the radio resources of both time and frequency slots are dynamically shared by all users under a proper scheduling policy. Our design objective is to increase the number of non-realtime service (e.g., WWW) users that can be supported in the system, especially when the minimum bit rate requirement is imposed on them. The simulation results show that our proposed algorithm can provide a significant improvement in the average outage probability performance for the NRT service, i.e., significantly increasing the number of NRT users without much compromising of the cell throughput.