• The Korean Journal of Emergency Medical Services
• /
• v.14 no.3
• /
• pp.71-81
• /
• 2010

Purpose: To minimize an interruption in chest compression, reduce the hands-off time, the American Heart Association has recommended the ratio of chest compression to ventilation ratio to 30:2 from 2005 CPR guideline to 2010 CPR guideline. However, current studies have shown that the hands-off time was > 10 seconds with that method. For this reason, we devised new CPR method that a ventilation to chest compression ratio of 2:30 to reduce pt assessment time and skipped the assessment step of carotid artery pulse would be a more effective way to reduce the hands-off time & the time to set the CPR. According to the more detailed purpose are listed below. 1) We would like to confirm efficiency of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 to reduce the hands-off time & the time to set the CPR. 2) We would like to evaluate possibility of increasing for chest compression accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 3) We would like to evaluate possibility of increasing for ventilation accuracy of a ventilation to chest compression ratio of 2:30 than a chest compression to ventilation ratio of 30:2 Methods: According to 2005 American Heart Association Guidelines, 60 paramedic students(20 students X freshmen, sophomore, junior) performed 5 cycles of 3~ chest compressions : 2 ventilations after A, B, C evaluation with Laerdal Resusci R Anne SkillReporters. After 5 minutes rest, the 60 students performed 5 cycles of 2 ventilations : 30 chest compressions after A, B evaluation with the manikins between 13 and 17 September 2010. The short reports including speed & accuracy of chest compression, respiratory, CPR cycle were gained from the manikins. Hands-off times were measured by assistants. Results: Recently, the importance of high quality CPR was emphasized in order to perform the CPR faster and more accurate. To find out improving the conventional CPR method, we switch the procedure of the compression and the ventilation. By switching the procedure back and forth, we are able to compare the effectiveness of CPR between two type of CPR method which are 2:30 and 30:2 methods. 2:30 is that the breaths is delivered twice, first and perform 30 compressions while 30:2 perform 30 compressions first and give 2 breaths followed by the ABC method. Also, we verify the effectiveness of the hands off time, compression accuracy of the compression through the comparison of the two procedure as mentioned earlier. Consequently research verified that 2:30 is the efficient by providing faster set up delivering more accurate chest compression. Conclusion: 2:30 can minimize a time delay from cardiac standstill until starting the chest compression. In addition, hands-off time which is an interruption in chest compression can be shortened by 2:30 method, which result to effective oxygenation of coronary artery & maintenance of the bloodstream. Once again, performing the 2:30 method provide lessen hands off time and increase the accuracy of the chest compression.

• The Korean Journal of Emergency Medical Services
• /
• v.15 no.1
• /
• pp.37-46
• /
• 2011

Purpose : This study is equivalence experiment performed to test practice effects between experimental group from both left and right direction of mannequin and control group having practice from only right direction in cardiopulmonary resuscitation education. Methods : Subject of the research were total 71 elementary and middle school teachers in J province who had not experience to have cardiopulmonary resuscitation. They were divided into experimental group of 35 participants who practiced cardiopulmonary resuscitation from both right and left direction of mannequin on Dec. 27, 2009 and control group of 36 participants who performed cardiopulmonary resuscitation from only right direction of mannequin on Dec. 28, 2009. Collected data were analyzed by SPSS/PC+(version 14.0). Results : 1. There was no statistically significant difference by sex among general characteristics of the subjects. 2. According to the quality of chest compression performed from the right direction of mannequin, experimental group showed better results in proper depth (time), insufficient depth (time), too lowered compression position (time) and inexact position (time) than control group(p<.05). In the quality of chest compression from the left side of mannequin, experimental group performed better results in proper depth (time), insufficient depth (time), inexact compression position (time) and mean chest compression depth(mm) than control group(p<.05) and also in more left-centered compression position (time) than control group(p<.001). 3. The quality of chest compression by experimental group, the right side of mannequin was superior in proper depth (time) to the left side of mannequin (p<.001) and showed better results in insufficient depth (time) and chest compression/recoil rate (p<.05). According to the quality of chest compression by control group, the right side of mannequin showed superior results in proper depth (time), insufficient depth (time), too left-centered compression position (time) and mean chest compression depth (mm) (p<.05) to the left side of mannequin. Conclusion : The group having practice from both right and left sides of mannequin was superior in the quality of chest compression to the group having practice from only right side of mannequin. How to practice cardiopulmonary resuscitation from both right and left sides of mannequin can be recommended and practice from left side of mannequin is also useful.

• The Korean Journal of Emergency Medical Services
• /
• v.16 no.3
• /
• pp.103-115
• /
• 2012

Purpose : Inadequate chest compression during cardiopulmonary resuscitation(CPR) may result in the insufficient blood flow to preserve critical organ function. The study evaluated changes of quality of cardiopulmonary resuscitation over time in 30:2 CPR by laypersons and analyzed rescuer factors affecting the quality of chest compressions over time. Methods : This study was designed to know quality of CPR changes during 5 minutes. 47 students completed CPR training courses. They were performed 30:2 CPR using a manikin with Skill-Reporter for 5 minutes continuously to get data of depth, rate of chest compression, volume and correct rate of ventilation. Results : Time dependent analysis showed significant ineffective compression depth in females and under weight rescuers. In case of female, we found effective compression depth has maintained up to 2 minutes, but it decreased significantly after 2 minutes. However, underweight rescuers maintained effective compression depth up to a minute but it decreased after 1 minute. Conclusion : Although compression rate maintained over time, chest compression quality declined significantly. It suggested switching compression at an interval of 2 minutes is reasonable for 30:2 CPR by layperson but underweight rescuers may provide effective chest compression by switching shift every one minute.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.5063-5073
• /
• 2016

In this paper, an efficient texture compression method is proposed for fast rendering, which exploits the spatial correlation among blocks through intra-picture block matching. Texture mapping is widely used to enhance the visual quality of results in real-time rendering applications. For fast texture mapping, it is necessary to identify an effective trade-off between compression efficiency and computational complexity. The conventional compression methods utilized for image processing (e.g., JPEG) provide high compression efficiency while resulting in high complexity. Thus, low complexity methods, such as ETC1, are often used in real-time rendering applications. Although these methods can achieve low complexity, the compression efficiency is still lower than that of JPEG. To solve this problem, we propose a texture compression method by reducing the spatial redundancy between blocks in order to achieve the better compression performance than ETC1 while maintaining complexity that is lower than that of JPEG. Experimental results show that the proposed method achieves better compression efficiency than ETC1, and the decoding time is significantly reduced compared to JPEG while similar to ETC1.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.199-203
• /
• 1995

The technology of Semi-Solid Forging (SSF) has been actively developed to fabricate near-net- shape products using light and hardly formable materials, the SSF process is composed of slug heating, forming, compression holding and ejecting step. After forming step in SSF, the slug is compressed during a certain holding time in order to be completely filled in the die cavity and be accelerated in solidification rate. The compression holding time that can affect mechanical properties and shape of products is important to make decision, where it is necessary to find overall hert transfer coefficeient properly which has large effect on heat transfer between slug and die. This paper presents the procedure to predict compression holding time of octaining the final shaped part with information of temperature and solid fraction for a cylindrical slug at compression hoiding step in closed-die compression process using heat transfer analysis considering latent heat by means of finite element method. The influence of the predicted compression hoiding time on mechanical properties of products is finally investigated by experiment.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.982-987
• /
• 2007

The necessity of data compression scheme for volume data has been increased because of the increase of data capacity and the amount of network uses. Now we have various kinds of compression schemes, and we can choose one of them depending on the data types, application fields, the preferences, etc. However, the capacity of data which is produced by application scientists has been excessively increased, and the format of most scientific data is 3D volume. For 2D image or 3D moving pictures, many kinds of standards are established and widely used, but for 3D volume data, specially time-varying volume data, it is very difficult to find any applicable compression schemes. In this paper, we present a compression scheme for encoding time-varying volume data. This scheme is aimed to encoding time-varying volume data for visualization. This scheme uses MPEG's I- and P-frame concept for raising compression ratio. Also, it transforms volume data using Daubechies D4 filter before encoding, so that the image quality is better than other wavelet-based compression schemes. This encoding scheme encodes time-varying volume data composed of single precision floating-point data. In addition, this scheme provides the random reconstruction accessibility for an unit, and can be used for compressing large time-varying volume data using correlation between frames while preserving image qualities.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.06a
• /
• pp.174-182
• /
• 1997

The technology of Semi-Solid Forging (SSF) has been actively developed to fabricate near-net-shape products using light and hardly formable materials. Generally, the SSF process is composed of slug heating, forming, compression -holding and ejecting step. After forming step in SSF, the slug is compressed during a certain holding time in order to be completely filled in the die cavity and be accelerated in solidification rate. The compression holding time that can affect microstructural characteristics and shape of products is important to make decision, where it is necessary to find overall heat transfer coefficient properly which has large effect on heat transfer between slug and die. This paper presents the procedure to predict compression holding time of obtaining the final shaped part with information of temperature and solid fraction for a cylindrical slug at compression holding step in closed-die compression process using heat transfer analysis considering latent heat by means of finite element method. The influence of the predicted compression holding time on microstructural characteristics of products is finally investigated by experiment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2023

In this paper, we implement a lossless compression technique for time-series data generated by IoT (Internet of Things) devices to reduce the disk spaces. The proposed compression technique reduces the size of the encoded data by selectively applying CNN (Convolutional Neural Networks) or Delta encoding depending on the situation in the Forecasting algorithm that performs prediction on time series data. In addition, the proposed technique sequentially performs zigzag encoding, splitting, and bit packing to increase the compression ratio. We showed that the proposed compression method has a compression ratio of up to 1.60 for the original data.

• The KIPS Transactions:PartC
• /
• v.8C no.5
• /
• pp.525-534
• /
• 2001

Generally, compression and encryption procedures are performed independently in lossless image compression and encryption. When compression is followed by encryption, the compressed-stream should have the property of randomness because its entropy is decreased during the compression. However, when full data is compressed using image compression methods and then encrypted by encryption algorithms, real-time processing is unrealistic due to the time delay involved. In this paper, we propose to combine compression and encryption to reduce the overall processing time. It is method decomposing gray-scale image by means of quadtree compression algorithms and encrypting the structural part. Moreover, the lossless compression ratio can be increased using a transform that provides an decorrelated image and homogeneous region, and the encryption security can be improved using a reconstruction of the unencrypted quadtree data at each level. We confirmed the increased compression ratio, improved encryption security, and real-time processing by using computer simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.835-842
• /
• 2009

The present thesis carried out a research on a compression pressure's reduction phenomenon and its countermeasure according to the thermal efficiency improvement method by a Miller method in 4-cycle low speed diesel engine. In case of retardation of intake valve closing time in a engine, the theoretical heat efficiency shows a remarkably reducing trend when a compression ratio is not compensated. Accordingly, the thermal efficiency showed an increasing trend in case of compensating the compression ratio. Especially, it could be understood that the theoretical heat efficiency at near ABDC $100^{\circ}$ of intake valve closing time in case of compensation of the compression ratio was improved by around 25.1%, and the mean effective pressure was also increased by around 18.6%. Also, as the retardation of intake valve closing time increases, air quantity becomes insufficient due to a backflow phenomenon of intake air and thus thermal efficiency was decreased in a high load operation domain. The solving method of this problem is possible by supercharge. Therefore, in order to improve thermal efficiency by retardation of ntake valve closing time, the thermal efficiency improvement according to low compression is possible when there are a compensation device of a compression ratio and a supercharge device. This is a problem-solving method of low compression and high expansion cycle.