• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.6
• /
• pp.392-397
• /
• 2010

Energy loss from windows accounts for large scores of heating and cooling loads also in energy saving apartments that is reduced over 30% of total energy consumption. Movable reflective insulations, insulation shutters, blinds, insulated shades are used to reduce energy loads from windows. In this study, energy saving performance of insulated shades was simulated by control methods. According to installation of insulated shades, heating loads were decreased about 10.5~11.3%, and cooling loads are decreased about 29.1~38.3% on an energy saving apartment. The heating peak load was reduced about 9.5% by insulated shades and the cooling peak load was reduced about 25.7~31.5%. In the case of insulated shades with automatic control system, simple time schedule control system would be more efficient than outdoor detection control system that should use several sensors.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.33-38
• /
• 2009

Energy loss from windows accounts for large scores of heating and cooling loads also in energy saving apartments that is reduced over 30% of total energy consumption. Movable reflective insulations, insulation shutters, blinds, insulated shades are used to reduce energy loads from windows. In this study, energy saving performance of insulated shades was simulated by control methods. According to installation of insulated shades, heating loads were decreased about $10.5{\sim}11.3%$, and cooling loads are decreased about $11.0{\sim}15.5%$ on an energy saving apartment. The heating peak load was reduced about 9.5% by insulated shades, but the cooling peak load is hardly ever decreased. Because in the condition of cooling peak load, latent cooling loads accounts for large score of cooling loads. Difference of the energy loads by a schedule control method and an outdoor detection control was no more than 5% for a base model. In the case of insulated shades with automatic control system, simple time schedule control system would be more efficient than outdoor detection control system that should use several sensors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.85-96
• /
• 2010

The recent environmental protection trend requires more strict energy saving, therefore every transportation system should reduce energy consumption to the minimum value. High-efficiency operation system, energy saving and $CO_2$ emissions shall be addressed as important issues in railway system. These issues are the most essential factors of railway, compared to major public transportation system. Recently, saving energy in the electric railway system has been studied. The efficient use of regenerated energy is considered to save energy. Namely, Using regenerative energy is that to store the energy generated during braking and discharge it again when a vehicle accelerates. Reusing energy stores and discharges energy, consequently enables a complete exchange of energy between vehicles, even if they are not braking and accelerating at precisely the same time, as is most frequently the case in everyday service. This paper analyzes effects of energy saving and $CO_2$-cut by using regenerative energy of electric vehicles.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.10
• /
• pp.969-976
• /
• 2004

Building energy saving is one of the most important issues in these days. Energy saving control strategies should be developed properly to achieve the saving. One of such area we could apply is the HVAC (Heating, Ventilation and Air-Conditioning) system. Through the optimal control algorithm for building energy management system (EMS), you can not only save the cost of building energy, but also protect HVAC system components against the unexpected condition. In order to verify the effectiveness of building energy saving, field test was accomplished for several months at 'A' building. And to get the measured data, remote control was used. If the remote control is used in BAS (Building Automation System), control and monitoring can be done for all of the building systems, such as HVAC, power, lighting, security and fire-alarm etc. anywhere any time. Using the remote control, Control and monitoring is possible for the testing system without going there. As the results of field test, we could reduce $5{\sim}10\%$ of the building energy cost.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.2
• /
• pp.194-206
• /
• 2024

This study focuses on analyzing the energy-saving effects of the recirculation aquaculture system using seawater source heat pumps and solar power generation. Based on the thermal load analysis conducted using the transient system simulation tool, the annual energy consumption of the recirculation aquaculture system was analyzed and the energy-saving effects of utilizing the photovoltaic system was evaluated. When analyzing the heat load, the sea areas where the fish farms are located, the type of breeding tank, and the circulation rate of breeding water were taken into consideration. In addition, a method for determining the appropriate capacity for each operation time was examined when applying the energy storage system instead of the existing diesel generator as an emergency power, which is required to maintain the water temperature of breeding water during power outage. The results suggest that, among the four seas considered, Jeju should be estimated to achieve the highest energy-saving performance using the solar power generation, with approximately 45% energy savings.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.1
• /
• pp.153-165
• /
• 2009

This paper apollos an ant colony system (ACS) for the vehicle routing problem with time window (VRPTW). The VRPTW is a generalization of the VRP where the service of a customer can begin within the time windows defined by the earliest and latest times when the customer will permit the start of service. The ACS has been applied effectively in geographical environment such as TSP or VRP by meta-heuristic that imitate an ant's biologic special duality in route construction, 3 saving based ACS (SB-ACS) is introduced and its solution is improved by local search. Through iterative precesses, the SB-ACS is shown to drive the best solution. The algorithm has been tested on 56 Solomon benchmarking problems and compared to the best-known solutions on literature. Experimental results shows that SB-ACS algorithm could obtain food solution in total travel distance minimization.

• Journal of Korea Game Society
• /
• v.9 no.1
• /
• pp.11-20
• /
• 2009

This study explores the effects of 'save and load' on game storytelling. In video games, a player can control the game she plays by repeatedly saving and loading game data until she reaches her intended goal. As a consequence, a player can manage the game time. In this article, game time is divided into two parts; play time and story time in order to examine how player's intentions are reflected in game storytelling. This is what distinguishes game narrative from others in that the player generates her own story by saving and loading.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1540-1547
• /
• 2009

Steel frame factories were surveyed in this study in order to explore the possibility of shortening the construction time and save on construction cost through overlapping at the stages of design or construction. In the survey, construction professionals were interviewed in order to collect quantitative data. Hypotheses were then formulated, and the data was thereby analyzed using the simulation technique in order to analyze the effects of the concurrent engineering method on shorter construction time and cost saving. In addition, actual cases were analyzed to determine the overlapping rates of major processes in terms of shorter construction time and cost saving and to analyze the relationship between time and cost due to overlapping.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.3-12
• /
• 2012

Additive willingness-to-pay (WTP) for leisure-travel time saving focused on the Iksan-Pohang Expressway and the Donghae Expressway was surveyed during the summer months to estimate the value of travel-time savings (VTTS) for non-business leisure trips. Travelers traveling between 2 and 3 hours on Iksan-Pohang Expressway had WTP of 723 won per 10 minutes of leisure-travel time savings and those traveling between 3 and 4 hours on Donghae Expressway had WTP of 854 won per the same. Based on this survey, we learned that WTP in leisure travel time savings increased with the total travel time. 300 effective samples for each expressway were collected, and estimation was separately conducted on the basis of Cox test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.8
• /
• pp.679-686
• /
• 2013

Power efficiency becomes more important in wireless LANs as the mobile stations send more data with limited batteries. It has been known that the IEEE 802.11 PSM is not efficient in high load networks: AP cannot deliver buffered packets to a PS station immediately and it can lead the station to stay in active state quite long and result in energy waste. Moreover, it is inefficient that only one data frame is retrieved by a PS-POLL frame. In this paper, we propose a time slotted scheme to enhance the PSM, in which a mobile station can reserve time slots to receive data frames. Our mechanism can reduce collisions by reservation and decrease the channel occupancy by transmitting multiple data frames via one PS-POLL. The analytic model and simulation results show that proposed scheme reduces power consumption significantly and enhances the performance of PSM.