• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.344-355
• /
• 2023

In complete denture fabrication, accurate preliminary impressions are crucial for obtaining an accurate final impression. However, it can be challenging in cases of atypical arch shapes. This case report compares diagnostic casts made with a stock tray and an intraoral scanner (IOS) in a patient with an atypical arch shape. A 58-year-old edentulous male patient with long, narrow, atypical arches was referred to the Oral and Maxillofacial Surgery department for complete denture fabrication. Compared to the diagnostic cast obtained using IOS with adequately captured anatomical parameters, the primary model obtained using a stock tray showed prominent overextended flanges on the labial and buccal sides of the maxillary arch and less prominent overextended flanges in the mandibular arch with pressure spots in the posterior palatal seal area. The custom tray fabricated from such a model required additional adjustment resulting in increased chair time during the final impression procedure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.760-769
• /
• 2023

A numerical simulations were performed to investigate the storm surge during the passage of Typhoon Maemi on the coast of Busan. The typhoon landed on the southern coasts of Korean Peninsula at 21:00, September 12, 2003 with a central pressure of 950 hPa, and the typhoon resulted on the worst coastal disaster on the coast of Busan in the last decades. Observed storm surges at Busan, Yeosu, Tongyoung, Masan, Jeju and Seogwipo harbors during the passage of the typhoon were compared with the computed data. The simulated storm surge time series were in good agreement with the observations. The simulated peak storm surges were estimated to be 230 cm at Masan harbor, 200 cm at Yeosu harbor and Tongyoung harbor, and 75 cm at Busan harbor. The computed storm surges along the east coast of Busan measure 52 to 55 cm, exhibiting a gradual reduction in surge height as one moves further from the coast of Busan. Therefore, coastal inundation due to the storm surge in the semi-enclosed bay can induce great disasters, and the simulated results can be used as the important data to reduce the impact of a typhoon-induced coastal disaster in the future.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.431-446
• /
• 2023

Samama wood (Anthocephalus macrophyllus (Roxb) Havil) is a fast-growing and lesser-utilized wood species that has inferior properties; therefore, its quality needs to be improved. This research aimed to determine the effect of citric acid impregnation at high curing temperatures on the dimensional stability and mechanical properties of wood. Citric acid solution with 10% concentration (w/w) was impregnated into wood samples by vacuum-pressure method (-0.5 cmHg, 30 min; 0.7 MPa, 3 h), followed by curing process at 140℃, 160℃, and 180℃ of temperature for 1 h. In comparison, the other wood samples were heat treated at the same temperatures and time. The results showed that the increase in curing and heat temperatures for both treatments were directly proportional to the dimensional stability, but inversely proportional to the mechanical properties. Citric acid impregnated had higher density, dimensional stability, and mechanical properties, except for modulus of rupture, than that of heat treatment. The optimum temperature is suggested at 160℃ in both treatments.

• Journal of Korean Medicine Rehabilitation
• /
• v.33 no.4
• /
• pp.125-144
• /
• 2023

Objectives This study aimed to investigate domestic clinical research trends in Shinbaro pharmacopuncture, identify diseases managed using Shinbaro pharmacopuncture, and suggest the direction for future studies to increase its clinical utilization. Methods This study used five steps proposed by Arksey and O'Malley and the PRISMA-extension for scoping reviews checklist. We examined published literature on Shinbaro pharmacopuncture studies reported until June 5, 2023, in the following eight databases (Research Information Sharing Service, Science ON, Oriental Medicine Advanced Searching Integrated System, KMBASE, The Society of Internal Korean Medicine, PubMed, EMBASE, and the Cochrane Library). The search terms used were 'Shinbaro' or 'Sinbaro'. Results A total of 47 studies were included in our analysis. Of these, 37 (78.7%) were interference time series studies. Shinbaro pharmacopuncture was the most frequently used treatment for lumbosacral disease (n=15). In the facial area, ST4 and ST6 were used in five out of six studies, and in the shoulder area, TE14 and LI15 were used in all studies. Nine of the 15 studies in the lumbosacral area used the EX-B2. The other parts mostly used the pressure points. Compared to other pharmacopuncture methods, the treatment effect was similar to that of bee venom, and faster than that of jungsongouhyul. Conclusions This is the first scoping review of Shinbaro pharmacopuncture therapy in South Korea. Studies with a high level of evidence based on sole treatment, large capacities, and standardization of Shinbaro pharmacopuncture need to be conducted to increase its clinical utilization.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.3
• /
• pp.21-40
• /
• 2008

This study was intended to validate and develop the driving stress scale. In a preliminary investigation, literature studies on the stress and open questionnaire were administered and examined in four regions in Korea. As a result, 121 items driving stress questionnaire were developed. In the study, this driving stress questionnaire was examined to 450 drivers located seven regions in Korea. The factors analysis revealed 5 meaningful factors[(Progress Obstacle: PO), (Traffic Circumstance: TC), (Accident & Regulation: AR), (Regulation Observance: RO), (Time Pressure: TP)] with 38 items. When internal consistency for each 5 factor was calculated, all sub-scale revealed a satisfactory level of Cronbach's α. Also, correlations with Driving Behaviour Inventory-General Driver Stress(DBI-GEN) and risk driving behaviors(speed driving, drunken driving, offence accident, defence accident) supported consistently validity of the Driving Stress Scale(DSS). Finally the result were discussed and implications are suggested for future studies.

• Korean Journal of Culture and Social Issue
• /
• v.15 no.2
• /
• pp.319-338
• /
• 2009

This study was intended to recognize whether speed desire frustration influences in driving stress. Stress desire frustration is the difference between prefer speed and normal speed. As a result, driver's the prefer speed is higher than the normal speed on 4 road condition(high-way, urban-way, residential-way, rural-way). Also, driver's speed desire frustration caused statistical effect in driving stress on 4 road condition. speed desire frustration effect Driving Stress Scale(DSS) 5 sub-scale factors(progress obstacle, traffic circumstance, accident & regulation, regulation obedience, time pressure). This is that driver who experience much speed desire frustration creates high driving stress. Speed desire frustration analyzed high driver and low driver's Driving Stress Scale(DSS) score and overspeed regulation and traffic accident experience difference. As analysis result, speed desire frustration high driver driving stress high appear. However, difference of overspeed regulation experience or traffic accident experience by speed desire frustration did not appear.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1009-1014
• /
• 2023

Comprehensive observations of the Euler method and the Lagrangian method were performed in order to obtain high-resolution observation data in space and time for the complex environment of new city. The two radiosondes, which measure meteorological parameters using Lagrangian methods, produced air pressure, wind speed and wind direction. They were generally consistent with each other even if the observation points or times were different. The temperature measured by the sensor exposed to the air during the day was relatively high as the altitude increased due to the influence of solar radiation. The temporal difference in wind direction and speed was found in the comparison of Euler's wind profiler data with radiosonde data. When the wind field is horizontally in homogeneous, this result implies the need to consider the advection component to compare the data of the two observation methods. In this study, a method of using observation data at different times for each altitude section depending on the observation period of the Euler method is proposed to effectively compare the data of the two observation methods.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.302-309
• /
• 2023

In general, castings often have complex shapes and significant variations in thickness within a single product, making grid generation for simulations challenging. Casting flows involve multiphase flows, requiring the tracking of the boundary between air and molten metal. Additionally, considerable time is spent calculating pressure fields due to density differences in a numerical analysis. For these reasons, the Cartesian grid system has traditionally been used in mold filling simulations. However, orthogonal grids fail to represent shapes accurately, leading to a momentum loss caused by the stair-like grid patterns on curved and sloped surfaces. This can alter the flow of molten metals and result in incorrect casting process designs. To address this issue, simulations in the Cartesian grid system involve creating a large number of grids to represent shapes more accurately. Alternatively, the Cut Cell method can be applied to address the problems arising from the Cartesian grid system. In this study, analysis results based on the number of grid in the Cartesian grid system for a casting flow analysis were compared with results obtained using the Cut Cell method. Casting flow simulations of actual products during various casting processes were also conducted, and these results were analyzed with and without applying the Cut Cell method.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.12-18
• /
• 2023

The effective evacuation strategy according to the accident scenario is crucial to minimize human casualties in the event of toxic gas leak accidents. In this study, the effect of the direction of a building and the location of an industrial complex on the increase in indoor concentration and outdoor diffusion was examined under the same leakage conditions, and effective evacuation criteria were established. In addition, the guidelines for building directions were suggested when constructing buildings that would mitigate human damage caused by chemical accidents. Three scenarios where buildings faced the front, side, and rear of the leakage direction were investigated through CFD simulations. The results revealed that when the building faced the industrial complex, both indoor and outdoor average gas concentrations increased significantly, reaching up to 120 times higher than the other two orientations. Moreover, the indoor space was filled with toxic gas substances more than twice in the same time due to the rapid increase of indoor concentration rate. In cases where the building's windows were positioned at the front, toxic gas stagnation occurred around the building due to pressure differences and reduced flow velocities. Based on our findings, the implementation of these guidelines will contribute to safeguarding residents by minimizing exposure to toxic gas during chemical accidents.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.64-71
• /
• 2024

The external fuel tank of an aircraft is a main component that can increase the cruising range of the aircraft. It must be able to be stably separated from the pylon in an emergency situation. At this time, a separation load is applied to the fin and the pivot of the external fuel tank. To stably separate the external fuel tank, the structural soundness of the fin and the pivot must be confirmed. In this study, structural tests were conducted to verify the structural integrity of the external fuel tank pin and pivot when the external fuel tank was separated from the aircraft. Results are then presented. In this paper, a test configuration diagram consisting of the hydraulic and load control equipment, data acquisition system, and pneumatic supply unit used in the structural test was explained. Test installation and test load application plan for each test condition were provided. As results of the structural test, it was found that test load and internal pressure of the test specimen were properly controlled within the allowable range in each test. It was confirmed that serious structural defects in the test specimen did not occur under required load conditions. In conclusion, through structural test for design limit load and design ultimate load, it was proven that the fin and pivot of the external fuel tank for aircraft covered in this study had sufficient structural strength.