• Journal of Korean Academy of Nursing Administration
• /
• v.1 no.1
• /
• pp.147-211
• /
• 1995

Medication is a kind of medical service and a therapeutic nursing function which takes large portion of nursing service and requires complicated procedures. So many different medical personnel should be involved and cooporate each other in order to accomplish medication. Medication is also a vital nursing service, So nurse feels heavy responsibi lity in that she gives medication to the patient finally, so she has much responsibility if medication error is happened. Therefore it seems very important to clarify the problem of medication system and method, and find the subculture of medication situation because it may promote nursing productivity. The study was conducted to 1. Describe and interpret medication situation. 2. Find out the problem of medication system and method and on alternatives. 3. Compare the medication system and method of hospitals which are located in Seoul with object hospital Ethnographic methodology was used to study medication situation by doing participant observation and interview of health care personnel. Ten nurses and three nurse aids were interviewed. Two residents and internists, two phamacists and two accountants were also interviewed. Data was obtained and analized according to Developmental Research Sequence introduced by Spradly. On the basis of this data the results were as follows. 1. The overall flow of medication system was devided into six stage : first, checking doctor's order : second writing doctor's order, : third, transfering slip into the related departments such as account department, pharmacy : fourth, distribution of medication from pharmacy to unit : fifth, identifing medication by nurses : and finally, medicating to the patient. Behaviorors have been under a lot of stress in that they have to do much works, especially paperworks, So too much time were needed. They also have been suffered interpersonal conflicts among health care personnel and role conflicts in the process of doing medication service. 2. In the process of checking order, the problem was that too much time was required for checking order and paperwork. The more the order changes the more the paperwork is. Nurses have been suffering difficulties in calling internist in order to get bill. Even if writing down slip for medication order is doctor's job, Sometimes nurse has been expected to write slip by doctors or nurse would write slip beacuse of two much complexities and efforts for calling doctors. If the slip were incorrect, much time complicated procedures were more required for correcting it. So delay of administering drug would be resulted consequently. Drugs were delivered from pharmacy to units by delivery agent and phamacist. But because drugs were delivered without arranging room number of patient. Nurse should rearrange drugs in order of the room number So it had made waste time and effort, and Even when emergency drugs were needed, Prompt delivery of drug was not easy because of many reasons. For nurses, it took too long in the identification of the right drug. Actually nurses have heavy burden when medication error happens because nurse is the final actor who gives medication to the patient, So every three shift nurse ought to check drugs as soon as every shift begins. That's why it took too much time due to repeated confirming procedure. When nurses had to go patient room in order to give medications, there were difficulties in watching patient until the patient take medicine correctly. So it was impossible to check every patient wheather he took medicine or not especially in hectic situation. 3. There were many hospitals in Seoul which have similar medication system and method as object hospital according to the results of questionaire. This means that many hospitals have been suffering srimilar problems which were identified in object hospital. 4. Recommendations for promoting simplification of medication system and method were the following : Redesigning of slip from two pieces of paper into one : early discharge announcement system, and slip confirming through computer and controlling of period of prescreption from one day to two or three days : designing personal drug storage box for each patient and using it. If nurses follow the recommendations, they will make medication short & simple, and also have enough time of direct nursing care 5. Even though there were many difficulties in medicating patients. Medication itself has been considered as a caring among nurses because it makes rapport between nurse and patient. So nurses had better accept medication as a portion of nusing service not a original portion of phamacist. There are some limits in this research in terms of confining to only one unit of one hospital, and treating it especially in view of nurses' aspects, So further researchs should be continnued from various kmds of viewpoints of doctors, phamacists and so on. ${\cdot\cdot\cdot}$. Especially esthnographic study of computerized medication system and method seems to be followed.

• The Korean Journal of Nuclear Medicine
• /
• v.29 no.4
• /
• pp.533-540
• /
• 1995

Attenuation correction is important in producing quantitative positron emission tomography (PET) images. Conventionally, photon attenuation effects are corrected using transmission measurements performed before tracer administration. The pre-injection transmission measurement approach may require a time delay between transmission and emission scans for the tracer studies requiring a long uptake period, about 45 minutes for F-18 deoxyglucose study. The time delay will limit patient throughput and increase the likelihood of patient motion. A technique lot performing simultaneous transmission and emission scans (T+E method) after the tracer injection has been validated. The T+E method substracts the emission counts contaminating the transmission measurements to produce accurate attenuation correction coefficients. This method has been evaluated in experiments using a cylindrical phantom filled with background water (5750 cc) containing $0.4{\mu}Ci/cc$ of F-18 fluoride ion and one insert cylinder (276 cc) containing $4.3{\mu}Ci/cc$. GE $Advance^{TM}$ PET scanner and Ge-68 rotating pin sources for transmission scanning were used for this investigation. Post-injection transmission scan and emission scan were peformed alternatively over time. The error in emission images corrected using post-infection transmission scan to emission images corrected transmission scan was 2.6% at the concentration of $1.0{\mu}Ci/cc$. No obvious differences in image quality and noise were apparent between the two images. The attenuation correction can be accomplished with post-injection transmission measurement using rotating pin sources and this method can significantly shorten the time between transmission and omission scans and thereby reduce the likelihood of patient motion and increase scanning throughput in PET.

• The Korean Journal of Archival Studies
• /
• no.21
• /
• pp.323-353
• /
• 2009

This study examines current states of Professionals of records management after "Records Management of public instituition Act(공공기관의 기록물 관리에 관한 법률)" was enacted in 1999. The law forced to arrange records manager in Records Center. However the hire of Professionals of records management became in earnest in 2005. Records Manager among the research officials was established in 2005 February in the Participatory Government. Because of this regulation, in 2005 July, Professionals of records management were arranged in each of 45 central department for the first time. Going through many trial and error, Professionals of records management contributed to systemizing record management of center department and office. According to "Public Records Management Act(공공기록물 관리에 관한 법률)" totally revised in 2007, sixteen major cities and its public office of education decided to employ Professionals of records management until the end of 2007. In addition, minor cities which consists of people over 150,000 and public office of education which consist of the number of students over 70,000 are supposed to have Professionals of records management until 2008, but it is not accomplished yet. Furthermore, when recruiting professionalists of records management, it is necessary to employ not as a contract or a part-time employee or but as a regular or a full-time worker. Especially, if the specialists of record management were employed as a part-time employee, they would not concentrate on their work because of their unstable social positions. It means that changes from a contract worker to a regular employee are needed without further delay. At first, records managers who were recruited at the Central Department in May 2007 had various kinds of difficulties and experienced trial and error. These days, however, they show their expertise with finding their own works. Someday in Korea, the records manager is expected to be a professional career with their know-hows and active movements.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.61-74
• /
• 2005

Digital Multimedia Broadcasting(DMB) is a reliable multi-service system for reception by mobile and portable receivers. DMB system allows interference-free reception under the conditions of multipath propagation and transmission errors using COFDM modulation scheme, simultaneously, needs powerful channel error's correction ability. Viterbi Decoder for DMB receiver uses punctured convolutional code and needs lots of computations for real-time operation. So, it is desired to design a high speed and low-power hardware scheme for Viterbi decoder. This paper proposes a combined add-compare-select(ACS) and path metric normalization(PMN) unit for computation power. The proposed PMN architecture reduces the problem of the critical path by applying fixed value for selection algorithm due to the comparison tree which has a weak point from structure with the high-speed operation. The proposed ACS uses the decomposition and the pre-computation technique for reducing the complicated degree of the adder, the comparator and multiplexer. According to a simulation result, reduction of area $3.78\%$, power consumption $12.22\%$, maximum gate delay $23.80\%$ occurred from punctured viterbi decoder for DMB system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.680-690
• /
• 2006

In this paper, we present a bit allocation scheme based on grouped sub-channels for MIMO-OFDM (Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing) systems using V-BLAST (Vertical-Bell laboratories LAyered Space-Time) detector. A fully adaptive modulation and coding scheme may provide optimal performance in the MIMO-OFDM systems, however it requires excessive feedback information. Instead, SBA (Simplified Bit Allocation) scheme for reduction of feedback overhead, which applies the same modulation and coding to all the good sub-channels, may be considered. The proposed scheme in this paper named SBA-GS (Simplified Bit Allocation based on Grouped Sub-channels) groups sub-channels and assigns the same modulation and coding to the set of selected sub-channel groups. Simulation results show that the proposed scheme achieves comparable bit error rate performance of the conventional SBA scheme, while significantly reducing the feedback overhead in multipath channels with small delay spreads.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.195-202
• /
• 2004

This paper introduces the design or parallel Pipeline high-speed analog-to-digital converter(ADC) for the high-resolution video applications which require very precise sampling. The overall architecture of the ADC consists of 4-channel parallel time-interleaved 10-bit pipeline ADC structure a]lowing 200MSample/s sampling speed which corresponds to 4-times improvement in sampling speed per channel. Key building blocks are composed of the front-end sample-and-hold amplifier(SHA), the dynamic comparator and the 2-stage full differential operational amplifier. The 1-bit DAC, comparator and gain-2 amplifier are used internally in each stage and they were integrated into single switched capacitor architecture allowing high speed operation as well as low power consumption. In this work, the gain of operational amplifier was enhanced significantly using negative resistance element. In the ADC, a delay line Is designed for each stage using D-flip flops to align the bit signals and minimize the timing error in the conversion. The converter has the power dissipation of 280㎽ at 3.3V power supply. Measured performance includes DNL and INL of +0.7/-0.6LSB, +0.9/-0.3LSB.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.42-48
• /
• 2016

In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3~3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.63-74
• /
• 1999

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration of large structures. Rule-base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the nonlinear control algorithms. Fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation. Non-linearity of the control rule makes the controller more effective than linear controllers. Design procedure based on the present fuzzy control is more convenient than those of the conventional algorithms based on complex mathematical analysis, such as linear quadratic regulator and sliding mode control(SMC). Robustness of presented controller is illustrated by examining the loop transfer function. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator-structure interaction, modeling error, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as $H_{mixed 2/{\infty}}$ optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is an efficient and attractive control method, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.99-105
• /
• 2015

This paper deals with the mMMA (modified MMA) which possible to improving the convergence speed that employing the serial connecting form of two stage digital filter instead of signal filter of MMA adaptive equalizer without applying the variable step size for compensates the intersymbol interference by channel distortion in the nonconstant modulus signal. The adaptive equalizer can be implemented by signal digital filter using the finite order tap delay line. In this paper, the equalizer is implemented by the two stage serial form and the filter coefficient are updated by the error signal using the same algorithm of MMA in each stage. The fast convergence speed is determined in the first stage, and the residual isi left at the output of first stage output is minimized in the second stage filter. The same digital filter length was considered in single stage and two stage system and the performance of these systems were compared. The performance index includes the output signal constellation, the residual isi and maximum distortion, MSE that is measure of the convergence characteristics, the SER. As a result of computer simulation, mMMA that has a FIR structure of two stage, has more good performance in every performance index except the constellation diagram due to equalization noise and improves the convergence speed about 1.5~1.8 time than the present MMA that has a FIR structure of single stage.