• Journal of Korean Academy of Nursing
• /
• v.42 no.5
• /
• pp.730-737
• /
• 2012

Purpose: This study was done to identify the time interval to pressure ulcer and to determine the optimal time interval for position change depending on pressure ulcer risk in patients using foam mattress in intensive care units. Methods: The Braden scale score, occurrence of pressure ulcers and position change intervals were assessed with 56 patients admitted to an intensive care unit from April to November, 2011. The time to pressure ulcer occurrence by Braden scale risk group was analyzed with Kaplan-Meier survival analysis and log rank test. Then, the optimal time interval for position change was calculated with ROC curve. Results: The median time to pressure ulcer occurrence was 5 hours at mild or moderate risk, 3.5 hours at high risk and 3 hours at very high risk on the Braden scale. The optimal time interval for position change was 3 hours at mild and moderate risk, 2 hours at high and very high risk of Braden scale. Conclusion: When foam mattresses are used a slight extension of the time interval for position change can be considered for the patients with mild or moderate pressure ulcer risk but not for patients with high or very high pressure ulcer risk by Braden scale.

• Journal of the Korean Home Economics Association
• /
• v.27 no.1
• /
• pp.111-126
• /
• 1989

The aim of the present study is to research into the household work time change and its structure in urban home makers by the choosen eleven studies and KBS's Data 1981, 1983, 1985, 1987. This study were proceeded under some limitations, it is choosen eleven studies that is different region: large city, medium and small town, and the household work's categories of original auther were changed. And KBS's Data was composed of general formation without personal character of home maker: FLC, number of childeren, family type, education, region. Although this study have a certain meaning of implementation, research into the household work time change and its's structure. The major findings of this study can be autlined as follows: (1) Total household work time did'nt so much changed through the choosen eleven studies compared with the last twenty years ago. In the change of each province household work time, time connected with meals and dwelling did not showed consistancy of change. But cloth laundering and mending time of 80's were declined compared with 70's. Family care time of 80's was increased, home management and buying time was declined untill '85, but again increasing trend '87. In choosen eleven studies, the household work time structure of urban home makers can be outlined: time connected with Meals>Family care>Cloth laundering and mending>Dwelling>Home management and Buying. (2) KBS's time-series data were analized as follows: a) Total household work time of '87 was declining gradually in weekday (34 minutes), sat. (41 minutes), sun (1 house and 2 minutes) compared with '81. b) The change of each province household work time: the time of cooking and sewing home management were declining gradually in its Mean time and its ratio of acters. The acter ratio of household worker in '81, '83, '85 was composed Cooking > Cleaning > Laundering > Home management > Buying > Child care > Sewing. In '87 was composed Cooking > Cleaning > Laundering > Buying > Home management > Child care > Sewing. c) The structure of household work time revealed some differences in each year and a day of the week.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.466-469
• /
• 2004

In this paper, real-time voice change method using pitch change technique is proposed to change one's voice to the other voice. For this purpose, sampling rate change method using DFT (Discrete Fourier Transform) method and time scale modification method using SOLA (Synchronized Overlap and Add) method is combined to change pitch. In order to evaluate the performance of the proposed method, voice transformation experiments were conducted. Experimental results showed that original speech signal is changed to the other speech signal in which original speaker's identity is difficult to find. The system is implemented using TI TMS320C6711DSK board to verify the system runs in real time.

• Journal of Korea Multimedia Society
• /
• v.22 no.4
• /
• pp.432-442
• /
• 2019

Most current human action recognition methods based on deep learning methods. It is required, however, a very high computational cost. In this paper, we propose an action change detection method to reduce repetitive human action recognition tasks. In reality, simple actions are often repeated and it is time consuming process to apply high cost action recognition methods on repeated actions. The proposed method decides whether action has changed. The action recognition is executed only when it has detected action change. The action change detection process is as follows. First, extract the number of non-zero pixel from motion history image and generate one-dimensional time-series data. Second, detecting action change by comparison of difference between current time trend and local extremum of time-series data and threshold. Experiments on the proposed method achieved 89% balanced accuracy on action change data and 61% reduced action recognition repetition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1150-1153
• /
• 2003

Recently, Many studies have been undergoing to reduce a working time in a field of machine tool. There are two ways of reducing working time; to reduce actual working time by heighten spindle speed and to reduce stand-by time by shortening tool exchange time. Automatic tool change system belongs to the latter case. Fixed address type automatic tool change system that is being developed in this study can store more number of tool in small space than magazine transfer type automatic tool changer as well as shorten tool exchange time. In this paper, a simplified equivalent model of finite element method in order to analyze frame structure of fixed address type automatic tool change system is presented.

• Journal of the Korean Society of Visualization
• /
• v.21 no.2
• /
• pp.63-71
• /
• 2023

Energy storage and distribution technologies are emerging as important factors as research on renewable energy continues. Analyzing the thermal flow of phase change material inside a latent heat storage device and to predict the phase change time is an important part for improvement of thermal performance. However, most of the current research is based on the trial-and-error experimental investigation to measure the phase change time. Therefore, in this study, a can-type phase change material container was designed, and the numerical method for analyzing the thermal flow of phase change material was established and validated. The error rate of the phase change time between the numerical and experimental results was within 5%, which proves its reliability. As a result, the phase change finishing times were found to be 78 minutes with inlet fluid temperature of 80℃ during charging process, and 126 minutes with inlet fluid temperature of 9℃ during discharging process.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.60-72
• /
• 2023

The purpose of this study is to measure the change in evacuation time at high schools according to the change in hallway width using an evacuation simulation program and to analyze the result of such change. In order to measure the evacuation time according to the change in the hallway width according to the 「Rules on the Standards for Evacuation and Fire Protection Structures of Buildings」 and to analyze the change in evacuation time resulted from the increase in the number of occupants, a scenario was constructed by applying the 「performance-oriented design method and standard for firefighting facilities, etc.」. As a result of the experiment, it was found that the evacuation time was the shortest when the width of the hallway was the widest, which was 3m. On the other hand, the evacuation time took the longest at 1.8m, which was the width of the second narrowest hallway. For the safety of high school students who spend a lot of time at school, it is necessary to secure a wide hallway width when building a new school or to provide periodic safety education in the case of an existing school whose hallways are considered narrow.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.757-764
• /
• 2011

Objective: The aim of this study was to provide a method to improve the compliance and reduce the time by reducing the workload during the model change work. Background: The enterprises are constructing the small quantity batch production system by increasing the number of model change and reducing model-changing. However, the compliance is low because the work is strenuous and high skills are needed, so the system management is facing with many difficulties. Method: After classifying the model change work according to the purposes(preparation, change and adjustment) with the target of mascara filling machine, element tasks time were measured and the motion analysis(therblig symbol) and REBA analysis were performed. The study incorporated 3 independent variables as the number of motion, REBA score and the element time. The dependent variable is the type of element work as preparation, change and adjustment. The statistical test was performed by one-way ANOVA(${\alpha}$ < 0.05). Results: For the preparation, the number of motions appeared in the order of Use(U), Transport Loaded(TL), and Position(P). The order appeared in change is Use(U), Release Load(RL), and Grasp (G). The adjustment appeared in the order of Position(P) and Use(U). The results of average motion time as the element work times divided by the number of motion appeared in the order of adjustment(1.85sec/motion), preparation(1.11sec/motion), and change(0.62sec/motion). The results of REBA showed that the average risk level of change and adjustment were medium, but 53.1% of change and 42.9% of adjustment were evaluated as high. Conclusion: Reducing the avoidance and improving the compliance of work could be expected if the job autonomy were improved by improving the working postures with high risk level. Application: It is expected to solve the problem of reducing the time of model change work in the small quantity batch production system. The future work is to carry out the improvement directions found in the results and compare the results after improvement.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.645-648
• /
• 2000

A workflow is a flow of work carried out by multiple people. In order to increase efficiency, it is re-quired to change the current workflow dynamically. Till now, three types of dynamic changes: flush, abort, and synthetic cut-over (SCO) , have been proposed. How- ever, the performance evaluations for dynamic workflow changes have not been undertaken. To do so, measuring the amount of time cost making a single change (called change time) and comparing the methods for obtaining such times become ever important. In this paper, we first define change time and then propose a computation method individually for each change type. Finally, we evaluate the performance of an example net change by computing the change times.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.10
• /
• pp.107-118
• /
• 2018

Cedric price is an architect and educator who have had an influence on architectural thinking through teaching and projects, rather than completed buildings. The purpose of this study was to analyze the architecture of Cedric Price in terms of time. Time was an important factor to understand his architecture along with his interest in technology, so most of his architectural thinking and methodology - anti-architecture, programmatic indeterminacy, a philosophy of enabling and so on, could be explained under the consideration of time. Depending on how he considered and used the concept of time, his projects could be categorized into two groups; The first group was related to the change over time, and this group again divided into three sub categories; change of user's preference, change of external environment, and change over building lifetime. The second group was related to planning of time, which could be divided again into two categories; programmatic planning and the usage planning during the period. This categorization could provide a frame to look into his architecture, through which his projects showed the limitation in modern architecture and the possibility for contemporary architecture.