• Journal of Korea Multimedia Society
• /
• v.9 no.10
• /
• pp.1282-1295
• /
• 2006

This paper proposes a method of image tile mosaics to preserve detailed depiction of the source image. This method enhance the shortcoming of the previous mosaic methods that cannot express the detailed depiction because of the gap between tiles. Our method is implemented by the usage of image tiles to preserve detailed depiction of the source image, as well as the usage of 2-layered tiles to.eliminate the gap between tiles. The method suggested in this paper are composed of following process. First of all, the position of the upper layer tile is located through a centroidal voronoi diagram to which an edge avoidance technique is applied, and the position of the lower layer tile is calculated using Delaunay triangulation. Secondly, discover the size and direction field of the tile considering the relation between tiles. Thirdly, adopt a photomosaic technique to use the image tiles. At this time, the technique of multi-level indexing is used to accelerate the speed of image searching. Through above process, the gap between tiles is minimized against other methods and a mosaic image with a maximized detailed description is achieved.

• Health Policy and Management
• /
• v.10 no.4
• /
• pp.99-115
• /
• 2000

This study was conducted to get a resonable set of budget allocation to public health programs. Matrix Delphi technique was used to obtain the logic of study results and eventually to form a human model which could predict opinion of professionals on budget allocation. Thirty-two professionals in academic and governmental area responded to Delphi survey. Questionnaire was developed using matrix formation, and the matrix was formed by 6 decision criteria on budget allocation and 26 public health programs. The decision criteria are as following: size of problem(morbidity), severity of problem, social equity, importance of prevention, technical feasibility and efficiency of programs. Severity of problem dropped out of the model because it had significant correlation with the size of problem. A total score of each program was obtained by weighting the relative importance of each criteria which also were given by survey respondents. These total scores indicate that the most important public health program is vaccination for infants and children in terms of budget allocation. Monitoring communicable diseases, mental health program, and anti-smoking program are the next. In addition, respondents were asked of the desirable budget size of each program. The result was rearranged by multiple regression model using the scores of each decision criteria. In this process, the current budget size of central government was provided to the respondents, and included in the model. h set of desirable budgets modified using tile model was obtained. Considering the current size of budget, tile results of the model is very different from that of the total score. Managing dementia is ranked the first. Health promotion program for the elderly, rehabilitation of the disabled and monitoring communicable diseases are the next. The need to increase the budget of vaccination for the infants and children was not found as so high. The matrix structure in Delphi survey gave us the precise basis to make optimal decision, and made it possible to develop an opinion predicting model. However the plentifulness and diversity of professional opinions were not fully obtained due to the limited number of decision criteria.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.197-206
• /
• 2006

One of the most significant characteristics of JPEG2000. the emerging still image standards. is the ROI (Region of Interest) coding. JPEG2000 provides a number of ROI coding mechanisms and ROI parameters. To apply them to an application, it must select the applicable values. In this paper, we evaluate how the ROI coding mechanisms and the ROI parameters influencing JPEG2000 qualify affect the ROI quality and the whole image quality. The ROI coding mechanisms are Maxshift and Implicit. and the parameters are tile size and ROI size, codeblock size, number of DWT decomposition levels and ROI importance. The bigger the tile size, the better the quality. The bigger the ROI size, the ROI importance and the number of DWT decomposition levels, the worse the qualify. In code block $32{\times}32$ of Maxshift and Implicit, it has the best qualify.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.3_4 s.141
• /
• pp.391-402
• /
• 2005

Tile purposes of this study were to find out any significant relations among body image, needs for body modification, self concept, and some selected clothing behaviors of two age group females using social comparison theory as the research background. The sampling method was a convenient sampling, and the subjects were 56 females aged from 20 to 24 years and 54 females aged from 40 to 49 years. The quasi-experiment and survey were conducted from May 1 to June 30, 2002. The results of tile study were as follows. First, the perceptual body image is more important than measured body size and ideal body size in body image. Apart from measurement instrument, people who perceived slim had higher self concept, exhibition and conformity of clothing. Second, there were significant differences between the two age groups(twenties and forties) in needs for plastic modification, self concepts and clothing behaviors. The younger age group exhibited higher need for modification than the older age group and the younger group also showed higher self concept, higher interests in clothing and fashion, more exhibition tendency and conformity to clothing.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.3
• /
• pp.3096-3106
• /
• 1973

As a link in the chain of antidrought measure, our attempt is made to obtain basic informations on the construction of an infiltration gallary which can be supplied with irrigation water by catching of underground water in small river beds, which is economical, permanent and efficient. The experiment was made, concerning the structure of catchment conduits, by constructing a model sand tank $1.5m{\times}5m{\times}1.5m$ in dimension made of reinforced concrete. Various kinds of measuring equipment were attached to the model tank which contains a set of catchment conduits, each of them was made 30cm in diameter and 60cm in length with the ratio of sectional area to total area of influx holes 10:1, 20:1, 30:1. The average size of influx holes was fixed from 0mm to 10mm, 20mm and 30mm in diameter respectively. Obtained results are as follow; (a) In view of the water catchment capacity, manufacturing cost and the antipressure strength of the catchment conduits, it is the best method to decide the total number of influx holes 20 per sq. meter of each tile surface, and the size of influx holes 20mm in diameter, when the conduits have diameter less than 1m. (b) The greatest factor of safety against external load is to arrange the influx holes in a zigzag manner on the tile surface. The most effective formula of arrangement is $S{\geqq}\sqrt{2gd}$ where: s : spacing of opening row. g : spacing of opening line. d : diameter of influs hole.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.313-315
• /
• 2010

In this paper, we describe research results of developing hardware rasterizer that is applicable to mobile 3D graphics system, designed in SIMD architecture and verified in FPGA. Tile-based scan conversion unit is designed like SIMD architecture running four tiles simultaneously and each tile traverses pixels hierarchical in 3-level so that visiting counts is minimized. As experimental results, $8{\times}8$ is the most efficient size of tile and the last step of tile traversing is performed on $2{\times}2$ sized subtile. The rasterizer supports flat shading and gouraud shading and texture mapper supports affine mapping and perspective corrected mapping. Also, texture mapper supports point sampling mode and bilinear interpolating sampling mode and two types of wrapping modes and various blending modes. The rasterzer operates as 120Mhz on xilinx vertex4 $l{\times}100$ device. To easy verification, texture memory and frame buffer are generated as block rom and block ram.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.3
• /
• pp.167-177
• /
• 2010

In recent years, the use of high-resolution tiled display system which does not have restrictions on the size of the screen and implements various layout of tile is increasing in order to evaluate the digital mock-up in physical scale or explore large engineering data set in detail. In this study, we developed multi-channel distributed visualization system which provides a virtual reality-based visual contents using 3D open-source graphics engine. Efficient data structures and exchange methods were proposed as a scene synchronization technology in PC cluster environments. DLP-Cube based tiled visualization system which provides $5{\times}2$ layout of display wall was developed and we validated our approach using this system. In addition, we introduced integrated control program that administrates PC cluster environment in remote and controls the layout of display channels.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1471-1474
• /
• 2003

The correlation between the object function and the design parameter is shown on this paper by using the characteristic function for tile mixed result of the structure analysis. tile buckling analysis and the table of orthogonal array according to the original crane's dimensional change. About the above two object functions, the effective of design change according to the change of design parameters could be estimated. Also, the crane's weight is reduced up to 20.58 percent maintaining the structural stability according to the thickness of plate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1663-1667
• /
• 2003

This thesis is on tile development of LD(Laser Diode) chip tester and the control system based on graphical programming language(LabVIEW) to control the equipment. The LD chip tester is used to test the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the receiver(optic fiber) are very small. Therefore, in order to test each chip precisely, this tester needs high accuracy. However each motion part of the tester could not accomplish hish accuracy due to the limit of the mechanical performance. Hence. an image processing with machine vision was carried out in order to compensate for the error. and also a load test was carried out so as to reduce tile impact of load on chip while the probing motion device is working. The obtained results were within ${\pm}$5$\mu\textrm{m}$ error.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.674-679
• /
• 2000

Designing of the squirrel cage AC Traction Motor has many difficulties which has to be small size in order to be suitable into bogie frame, high efficiency and light weight. It means that induction motor for tractive purpose has to be different magnetic and electric loading ratio from industrial induction motor. This paper is devoted to an examination of how this ratio affects overall design concept and hence the main design points for traction motor. Also studied is tile changed coefficients of the magnetic and electric loading ratio squirrel cage induction motor for the traction purpose which has been already identified from tile reference book for industrial purpose induction motor.