• Korean Institute of Interior Design Journal
• /
• v.17 no.5
• /
• pp.115-122
• /
• 2008

There are many ways to know the social and cultural level of each country. Among them, a museum are not only the best place to understand the history, the life style and the culture level. The most important constituent, which museum architecture has, are visitors, exhibition and communication between visitors. Exhibition space composition is the one of important things in museum architecture, and it's essential to show an intent of exhibition to visitors. This thesis has the purpose to provide the basic material through analyzing exhibition space composition and exhibition method of the theme museum and understanding the relativity of them so that the new theme museums can be designed in the Tight direction. So I chose the independence museum that opened within recent 10 years, finally middle & small size's theme museum were selected. The results from the case study are as follow. Firstly, the exhibition space unit of basic type and center-hall enter type had a one-way for gateway and used the exhibition of three or four faces. The exhibition space unit of around tile center-hall type and guidance type had the separated gateway and used the exhibition of one or two faces. Secondly, the exhibition method of selected museums was divided into the wall face type and the island type. The exhibition method of two faces mainly used in guidance type caused complicated visitor circulation. In that case, it seemed to be good that two walls were used alternately. Thirdly, there were visual type, audio-visual type, handling type and experiential type in the method of exhibition. The former two types were used mostly, and the latter two types were rarely used. Fourthly, the wall face type was inefficient for exhibition because given walls were supposed to be used. Therefore, it was more effective to use the wall face type and the island type together.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.1
• /
• pp.7-10
• /
• 2003

Single phase CuInS$_2$ thin film with the strongest diffraction peak (112) at diffraction angle (2$\theta$) of 27.7$^{\circ}$ and the second strongest diffraction peak (220) at diffraction angle (2$\theta$) of 46.25$^{\circ}$was well made with chalcopyrite structure at substrate temperature of 70$^{\circ}C$. annealing temperature of 250$^{\circ}C$, annealing time of 60 min. The CuInS$_2$ thin film had the greatest grain size of 1.2 Um when the Cu/In composition ratio of 1.03, where the lattice constant of a and c were 5.60${\AA}$ and 11.12${\AA}$, respectively. The Cu/In stoichiometry of the single-phase CuInS$_2$thin films was from 0.84 to 1.3. The film was p-type when tile Cu/In ratio was above 0.99 and was n-type when the Cu/In was below 0.95. The fundamental absorption wavelength, absorption coefficient and optical band gap of p-type CuInS$_2$ thin film with Cu/In=1.3 were 837nm, 3.OH 104 cm-1 and 1.48 eV, respectively. The fundamental absorption wavelength absorption coefficient and optical energy band gap of n-type CuInS$_2$ thin film with Cu/In=0.84 were 821 nm, 6.0${\times}$10$^4$cm$\^$-1/ and 1.51 eV, respectively.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.51-60
• /
• 1998

La-modified $PbTiO_{3}$(PLT) thin plates were prepared for the fabrication of PLT pyroelectric IR sensors. The effects of the preparation parameters such as tile sintering temperature, the La content, and the ambient powder quantity, on the microstructural and dielectric properties of PLT thin plates were investigated by X-ray diffraction, scanning electron microscope, and measurements of relative density and dielectric properties. With an increased La content, the tetragonality c/a was decreased but the densification and the grain size were increased, which is considered to be due to the increased Pb vacancy concentration to maintain charge neutrality at the increased of La content. When the quantity of the ambient powder wvas increased, the tetragonality was slightly increased, which is believed io be due to the reduced evaporation of PbO. But the e(fect is insignificant compared to that of La content. The dielectric constant at room temperature was increased and the Curie temperature was decreased in accordance with the decreased tetragonality ratio c/a with the increase of La content. The dielectric constant and tan ${\delta}$ of $500{\mu}m$ thick PLT thin plate with 10 wt% excess PbO and 10 mol% La contant sintered at $1250^{\circ}C$ for 2 hours in ambient powder of $0.02\;g/cm^{3}$ were 360 and 0.02, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.46-59
• /
• 1998

This paper presents shape design, surface construction, and cutting path generation for the surface of marine ship propeller blades. A propeller blade should be designed to satisfy performance constraints that include operational speed which impacts rotations per minutes, stresses related to deliverable horst power, and the major length of the marine ship which impacts the blade size and shape characteristics. Primary decision variables that affect efficiency in the design of a marine ship propeller blade are the blade diameter and the expanded area ratio. The blade design resulting from these performance constraints typically consists of sculptured surfaces requiring four or five axis contoured machining. In this approach a standard blade geometry description consisting of blade sections with offset nominal points recorded in an offset table is used. From this table the composite Bezier surface geometry of the blade is created. The control vertices of the Hazier surface patches are determined using a chord length fitting procedure from tile offset table data. Cutter contact points and path intervals are calculated to minimize travel distance and production time while maintaining a cusp height within tolerance limits. Long path intervals typically generate short tool paths at the expense of increased however cusp height. Likewise, a minimal tool path results in a shorter production time. Cutting errors including gouging and under-cut, which are common errors in machining sculptured surfaces, are also identified for both convex and concave surfaces. Propeller blade geometry is conducive to gouging. The result is a minimal error free cutting path for machining propeller blades for marine ships.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3102-3107
• /
• 2013

Inorganic pigments were prepared from $Al_2O_3$, CoO, $Cr_2O_3$, ZnO, $SrO_2$ and Kaolin. The pigment was prepared through the processes of mixing and crushing of the raw materials, sintering, milling and drying. The color of the pigments was changed from blue to green as $Cr_2O_3$ contents in the pigment increased. The color became brighter irrespective of the pigment composition as pigment particle size became smaller. Maximum sintering temperature was the most suitable at around $1,250^{\circ}C$. In the test of compatability between the pigment and glaze, the color became close to green as $Cr_2O_3$ contents in the pigment increased, and became close to blue as CoO contents increased.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.505-505
• /
• 2000

Perkinsus sp. has been identified as responsible organism for the decrease in Manil clam production along the west and south coast of Korea. Monthly investigation on infection intensity and pathology of Perkinsus infected Manila clam population was carried out in Komsoe Bay located in the west coast during February and December 1999. About one hundred clams were collected each month for the analysis. Infected clams were incubated in fluid thioglycollate media over a week, stained with iodine solution, digested with 2M NaOH and the number of Perkinsus present in an individual recorded. Histological slides were also prepared from infected clams and their pathologic symptoms were examined using a microscope. Trophozoites of Perkinsus sp. were dominantly distributed on gills and epithelia of digestive glands however a few numbers could be detected at siphons and foot tissues. Heavily infected clams often exhibited white spots on mantle and foot tissues due to the inflammatory reaction of the hemocytes, forming nodules. Trophozoites were also found along the connective tissues of follicles during spawning season indicating that Perkinsus sp. may disturb reproduction of the clam. Total number of Perkinsus sp. in an individual clam varied from none to 9, 550, 000 with a monthly mean of 279, 663 to 2, 198, 558 during the course of study. The number of Perkinsus sp. in the clam was found to lowest durin July and August when unusually low salinity was recorded in this area due to the heavy rain. Highest monthly infection intensity in terms of total number of Perkinsus sp. i clam was observed in February, when water temperature recorded as lowest during the study. Small size of clams with shell length of ten mm or less were not infected with Perkinsus sp. It was concluded that Perkinsus infection in Manila clam is in pa controlled by changes in salinity and clam growth; low salinity environment minimize infection intensity while tile clams get more Perkinsus as they grow.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8B
• /
• pp.514-524
• /
• 2005

In optical burst switching(OBS) networks, the ingress edge router assembles packets in the same class queue into the appropriate size of burst. A burst control packet(BCP) is generated for channel reservation of corresponding data burst and sent earlier than the corresponding data burst with an offset time. Offset time is determined considering the number of hops from source to destination and the required quality of service(QoS). After offset time, the burst data is passed through tile pre-configured optical switches without any O/E/O conversion. But a failure in OBS networks may lead to the loss of bursts until the ingress nodes receive the failure indication signal. This results in a significant degradation in QoS. Therefore, in this paper, we propose a fault-tolerant node architecture based on sub-carrier multiplexing to reduce the effects of failure in OBS networks. The Performance of the proposed fault-tolerant node architecture exhibits considerable improvement as compared with the previous ones.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.66-70
• /
• 2006

Magnetite nanoparticles, which have been extensively used in many fields, were encapsulated with a natural polymer, chitosan, to improve their biocompatibility. We have synthesized magnetite $(Fe_3C_4)$ nanoparticles using chemical coprecipitation technique with sodium oleate as surfactant. Nanoparticle size can be varied from 1.2 to 7.4nm by controlling the sodium oleate concentration. Magnetite phase nanoparticles could be observed from X-ray diffraction. Magnetic colloid suspensions containing particles with sodium oleate and chitosan have been prepared. High magnetic property chitosan-microsphere particles were prepared from oleate-coated magnetite suspension using spray method. The surftce, and tile morphology of the magnetic chitosan microsphere particles were characterized using optical microscope and scanning electron microscope. Magnetic hysteresis measurement were performed using a superconducting quantum interference device (SQUID) magnetometer at room temperature to investigate the magnetic properties of the chitosan microspheres including magnetite nanoparticles. The SQUID measurements revealed superparamagnetism of nanoparticles.

• Korean journal of applied entomology
• /
• v.14 no.4 s.25
• /
• pp.215-219
• /
• 1975

The number of instars of pear sawfly larvae (Janus piri Okamoto) collected front field pear trees, were determined by measuring the width of head capsule, and the growth ratio in each instar was also studied. 1. The larval head width had six distinct peaks, which suggests that the larva of this insect passes six instars. 2. The head width tended to increase as the instars avdance, except in tile first and second instars. The coeffieient of variation decressed as the instars advanced. The growth ratio, which was similarly great in the first and second instars, decreased as the instars advanced. 3. Gains' and Campbell's formulae seemed to be more suitable than Dyer's for the determination of larval instars of this insect by the measurement of headwidth. 4. The larval instars could be inferred from the extent of damage to pear tree by this insect; that is the larvae in the second to fourth instars usually gave slight and invissible damage, while those in the fifth to sixth instars gave rapid and severe damage.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.51-64
• /
• 2004

This paper proposes an algerian of generating a tuner-template from multiple fingerprint impressions using a data fusion technique for fingerprint enrollment. The super-template is considered as a single fingerprint template which contains most likely true minutiae based on multiple fingerprint images. The proposed algorithm creates the super template by utilizing a recursive Bayesian estimation method (RBEM), which assumes a sequential fingerprint input model and estimates the credibility of the minutiae in previous input templates froma current input template. Consequently. the RBEM assigns a higher credibility to commonly detectable minutiae from several input templates and a lower credibility to rarely found minutiae from other input templates. Likewise, the RBEM is able to estimate a credibility of the minutia type (ridge ending or bifurcation). Preliminary experiments demonstrate that, as the number of fingerfrint images increases, the performance of recognition can be improved while maintaining the processing time and the size of memory storage for tile super-template almost constant.