• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.89-94
• /
• 2001

The binding of cellobiohydrolases to cullulose is a crucial initial step in cellulose hydrolysis. In the search for a detailed understanding of the function of cellobiohydrolases, much information concerning how the enzymes and their constituent catalytic and cellulose-binding changes during hydrolysis is still needed. The adsorption of purified two cellobiohydrolases (Ce17A and Ce16A) from Trichoderma reesei cellulase to microcrystalline cellulose has been studied. Cellobiohydrolase II (Ce16A) does not affect the adsorption of cellobiohydrolase I (Ce17A) significantly, and there are specific binding sites for both Ce17A and Ce16A. The adsorption affinity and tightness of the cullulase binding domain (CBD) for Ce17A are larger than those of the CBD for Ce16A. The CBD for Ce17A binds more rapidly and tightly to Avicel than the CBD for Ce16A. The decrease in adsorption observed when the two cellobihydrolases are studied together would appear to be the result of competition for binding sites on the cellulose. Ce17A competes more efficiently for binding sites than Ce16A. Competition for binding sites is the dominating factor when the two enzymes are acting together, furthermore adsorption to sites specific for Ce17A and Ce16A, also contributes to the total adsorption.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.72-77
• /
• 2016

Airplane reservoirs made of Al7075 are coated with an anodizing layer to maintain precision, air tightness and corrosion resistance. It is commonly required that the inner surface roughness of the reservoir be less than an average $0.2{\mu}m$ to maintain stable oil pressure. Even though precision polishing is necessary to achieve this quality it is not easy. Inner surface roughness is not uniform and the quality of the product is irregular because most of the work is done by hand. The purpose of this study is to design an exclusive polishing machine and to determine the standard cutting condition and polishing condition necessary for good inner surface roughness and to improve workefficiency.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.11 no.1
• /
• pp.39-44
• /
• 2013

Purpose : The purpose of present study is to evaluate the joint angles of legs in the standing posture for six patients with unilateral knee osteoarthritis. Methods : The participants underwent unilateral total knee replacement. A motion analysis was used to measure the joint angles of the hip, knee, and ankle. The measurements were taken before the surgery, one week and two weeks after the surgery. Both sides of the legs were evaluated. Results : This result showed that after a certain healing period, both hip joint angles showed a significant difference while there was no significant difference in the knee and ankle joint angles. After surgery, the angle of ankle dorsiflexion was smaller on the operated side than the opposite side compared to the pre-surgery measurements. Conclusion : After surgery, the asymmetry in a standing position left unchanged due to contracture of the knee joint and tightness in the hamstring muscle. Therefore, when physiotherapists plan an initial exercise programs for TKR patients, it is essential to apply adequate exercises which consider the contracture of the leg joints.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.749-761
• /
• 2014

Tubing adapter is a key connection device in Gas-Tight Deep-Sea Water Sampler (GTWS). The sealing performance of the tubing adapter directly affects the GTWS's overall gas tightness. Tubing adapters with good sealing performance can ensure the transmission of seawater samples without gas leakage and can be repeatedly used. However, the sealing performance of tubing adapters made of different materials was not studied sufficiently. With the research discussed in this paper, the materials match schemes of the tubing adapters were proposed. With non-linear finite element contact analysis and sea trials in the South China Sea, it is expected that the recommended materials match schemes not only meet the requirements of tubing adapters' sealing performance but also provide the feasible options for the following research on tubing adapters in GTWS.

• Journal of the Korean Home Economics Association
• /
• v.29 no.1
• /
• pp.13-25
• /
• 1991

We measured change of peripheral skin temperature and mean skin temperature when the upper arm and thigh are pressured in order to know the effect of skin pressure applied by clothing on blood circulation. After release from pressure, we observed also recovery condition. At the same time, we examined relation between pressure and a feeling of thightness. Three physiques of healthy females, namely slender, standard and plump, served as subjects. We used continuous restraint method with skin pressure applied by experimental fabric for 10 min. As a result of this experiment, we obtained following findings. 1. The significant difference was marked at the pressure, measuring time and physique with change of skin temperature under upper arm restraint. The peripheral and mean skin temperature decreased with the lapse of restraint time. A remarkable tendency observed according to the increase of restraint pressure. Recovery condition after release from pressure not yet recovered to original state, for all after a lapse of 10 min. 2. The significant difference was marked at the pressure, measuring time and physique with change of skin temperature under thigh restraint, especially different physique was remarkable among them. The peripheral skin temperature decreased or decreased. Recovery condition after release from pressure was the same upper arm. 3. Main factor affecting the evaluation of a feeling of tightness was restraint pressure. The value of pressure sensation made remarkable declined after a lapse of 10 min restraint time. Individual differences, however, were shown in pressure sensation.

• Journal of Chest Surgery
• /
• v.21 no.4
• /
• pp.681-691
• /
• 1988

Fifty-five patients with primary mediastinal tumors and cysts which were seen at T.S. Dept., HYUH, were analyzed clinically, histologically, in an incidence of anatomic location and therapeutic results. The results were summarized as follows; 1] The ages of the patients in this series ranged from 15 months to 79 years with the highest incidence in the age group of third decade, and there were no sex distribution[M:F=0.96]. 2] The most frequently encountered tumors were teratodermoid tumors[29%] followed by neurogenic tumors[22%], thymomas[15%] and benign cysts[11%] in decreasing order of frequency. 3] Based on the subdivision of the mediastinum, 62% of the tumors were in the antero-superior mediastinum, 7% in the middle mediastinum and 31% in the posterior mediastinum. 4] The most frequent symptom was chest pain and others were dyspnea, cough, chest tightness and dysphagia. Asymptomatic patients were 29%. 5] Benign tumors and cysts were 71% and malignant tumors were 29%. 6] The successful removal was possible in all the benign mediastinal tumors and cysts[39 cases] and partial removal or biopsy was performed in the 12 cases among 16 cases of malignant mediastinal tumors. 7] Postoperative complications were bleeding, chylothorax, vocal cord paralysis, wound infection and hypothyroidism. 8] The most frequent mediastinal tumor in the West is neurogenic tumor but is teratoma in Korea.

• Journal of Korea Multimedia Society
• /
• v.20 no.5
• /
• pp.769-781
• /
• 2017

Deep learning networks like Convolutional Neural Networks (CNNs) show successful performances in many computer vision applications such as image classification, object detection, and so on. For implementation of deep learning networks in embedded system with limited processing power and memory, deep learning network may need to be simplified. However, simplified deep learning network cannot learn every possible scene. One realistic strategy for embedded deep learning network is to construct a simplified deep learning network model optimized for the scene images of the installation place. Then, automatic training will be necessitated for commercialization. In this paper, as an intermediate step toward automatic training under fisheye camera environments, we study more precise human localization in fisheye images, and propose an accurate human localization method, Automatic Ground-Truth Labelling Method (AGTLM). AGTLM first localizes candidate human object bounding boxes by utilizing GoogLeNet-LSTM approach, and after reassurance process by GoogLeNet-based CNN network, finally refines them more correctly and precisely(tightly) by applying saliency object detection technique. The performance improvement of the proposed human localization method, AGTLM with respect to accuracy and tightness is shown through several experiments.

• Structural Engineering and Mechanics
• /
• v.27 no.3
• /
• pp.277-292
• /
• 2007

Based on the composite finite element simulation and a series of hydrostatic pressure and burst tests, autofrettage effects on strength and deformation of fiber reinforced pressure vessel with metallic liners have been studied in the paper (autofrettage: during the course of one pressure taking effect, the increasing internal stress in metallic liner can surpass the yielding point and the plastic deformation will happen, which result in that when there is no internal pressure, there are press stress in liner while tensile stress in fiber lamination). By making use of a composite finite element Ansys code and a series of experiments, the autofrettage pressure is determined in order to make the aluminium liner be totally in elastic state, under given hydrostatic test pressure. The stress intensity factors of the longitudinal crack in aluminum liner end under internal pressure and thermal loads have been computed and analyzed before and after the autofrettage processing. Through numerical calculation and experiment investigations, it is found that a correct choice for autofrettage pressure can improve the gas-tightness and fatigue strength of FRP vessel.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.6
• /
• pp.37-49
• /
• 2018

In this paper a new kind of unit-prefabricated building is shown. The unit-prefabricated buildings are made up living unit, energy unit, water unit. The design trend implemented the energy insulation, solar PV panels, energy storage system which are maintained for zero energy buildings. We made a prototype for zero energy flexible residential unit. The first step, we was evaluated the physical performance, insulation, airtightness. The second step, we was evaluated energy performance building to design heating and cooling system to combined PV system. As a results, the insulation performance wall was $0.18W/(m^2{\cdot}K)$. The results of air-tightness was 12.13 ACH@50 (1/h). The building energy demand ratings and solar energy generation has the possible to be ballanced.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.99-106
• /
• 2017

Recently, the condensation and mold problems of apartment buildings has been growing due to high insulation and high air-tightness performance for energy saving. Most of all, occupants in residential buildings has suffered from property damages due to the condensation and mold of built-in furniture. Condensation at built-in furniture were generally found in winter at the of furniture's back panels, adjacent surfaces of wall, floor and ceiling. The aim of paper is to analyze the characteristics of adjacent area around built-in furniture's condensation problem and the thermal environment around the built-in furniture in winter through the field measurements at apartment buildings. In this research, the thermal conditions and surface temperature around the built-in furniture were measured during winter season. In this research, we analyzed thermal conditions for built-in furniture which were applied and not applied auxiliary heating device. In results, it is important to consider increasing surface temperature for using heater and decreasing absolute humidity due to the occupants' behavior around built-in furniture for preventing condensation.