• 한국의류학회지
• /
• 제36권10호
• /
• pp.1050-1057
• /
• 2012

This study helps develop a cool body armor that maintains a tight-fit configuration to the body surface and evaluates the performance of newly developed body armor in a wear test. Three types of body armor were used for evaluation. One was a tight fitting body armor that was constructed to improve the degree of fit and ease of movement for Korean soldier using 3D technology. Another was ventilating body armor with attached spacers on the shoulder to reduce the thermal stress on the soldier. The third was a prevailing body armor produced by a Korean body armor company. In order to evaluate the performance of the body armor, a human wear test, a thermal mannequin test, and computational fluid dynamics (CFD) were executed. Five subjects participated in the wear test. Subjective wear sensation, total amount of sweat and dynamic change of clothing microclimate were observed during and after exercise on a treadmill; subsequently, it was found that subjects rated tight fitting body armor and ventilating body armor lighter, drier, and easier to move than the conventional body armor (p<.05). Total amount of sweat was the least in the case of ventilating body armor. The thermal resistance and vapor resistance of the ventilating body armor were improved remarkably. In addition, the skin temperature of the ventilating body armor with spacers was lower than the tight fitting body armor by at least $1^{\circ}C$ in the CFD result. It is noted that thermal-wet comfort of the 3D body armor with ventilating feature is superior to the conventional body armor, especially when the ventilating channel is not closed due to a backpack.

• 한국안광학회지
• /
• 제16권1호
• /
• pp.107-116
• /
• 2011

목적: 콘택트렌즈 피팅 시 렌즈 관련 사양의 변화에 따라 다른 값을 가지는 각막에서 산소부족이 없는 최소 Dk값 및 산소농도를 계산/확인할 수 있는 프로그램을 수립하고자 하였다. 방법: 엑셀 프로그램을 이용하여 콘택트렌즈착용 시 렌즈 아래 형성되는 눈물층의 두께와 Dk값을 계산할 수 있는 방정식을 세우고 수치 계산 모델을 확립하였다. 결과: 렌즈사양을 변화시키면 렌즈 아래 눈물층의 두께가 변하며 이에 따라 산소투과도가 다르게되므로 각막이 요구하는 최소 산소농도 역시 달라짐을 계산으로 확인하였으며, 눈물층의 두께를 위한 계산 프로그램은 눈물층의 형태에 따라 다르게 선택되어야 함을 밝혔다. 즉, flat 피팅 시에는 렌즈가장자리와 각막이 만나서 만들어지는 오목면의 형태에 따라 렌즈 아래 눈물층의 두께가 결정되며, flat하게 피팅 될수록 각막주변부 표면의 산소농도는 감소되어 계산값으로는 (-)가 되며 실제로는 산소농도는 0이 된다. Tight 피팅 시 각막표면의 산소를 계산하면 tight 피팅으로 눈물층의 두께가 렌즈의 두께보다 극단적으로 두꺼워지게 되어 계산값은 역시 (-)가 되며 각막 표면의 산소 농도는 0이 되어 산소결핍을 야기하게 됨을 알 수 있다. 결론: 콘택트렌즈의 변수를 조절하여 피팅 상태를 변경할 때에는 눈물층의 두께와 이에 따른 각막표면의 산소농도를 정확하게 계산하여 산소결핍이 나타나는 일이 없도록 하여야 한다.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.

• 한국의류학회지
• /
• 제36권4호
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• 한국의류학회지
• /
• 제36권9호
• /
• pp.940-951
• /
• 2012

This study evaluates the fit preference of the tailored jacket according to body types for 20's adult women through a comparison of real and virtual fit. A five point fit evaluation scale utilizing a wearer acceptability scale by Shen and Huck was used to evaluate the degree of the preference of real and virtual fit. This scale contained 23 items in three categories: front fit, back fit, and side fit. For each item, 5 responses from 'too tight' fit (1 point) to 'too loose' fit (5 point) were possible. The middle position for each fit criterion indicated a 'good' fit (3 point). The data were analyzed with a t-test using statistical program SPSS 17.0. According to the results, there were no significant differences ($p{\leq}.05$) between the real and virtual fit preference in total measurement items such as front collar, lapel and roll line, front shoulder slope, front armhole, front waist, abdomen, sideseam, hemline, front silhouette, side shoulder, side armhole, side sleeve width, side hip, side silhouette, back collar stand, upper back, back armhole, back waist, back hip, back silhouette except front bust, side waist, and back center back. The factor that caused a difference in the fit preference between the real and virtual fit evaluation was a specific body type such as Body Type A that indicated a small bust circumference and a big hip circumference.

• 대한가정학회지
• /
• 제42권4호
• /
• pp.45-54
• /
• 2004

The Purpose of this study was to research and develop a Pattern of tight Pants, featuring excellent appearance, movement and suitability for the lower body, which are widely used as a basic item for modem dance, aerobic dance and dance sports, and to provide manufacturing data for the pants. This study was carried out with 118 People who majored in dance, using questionnaires asking questions about their understanding and preference of dancewear The experimental dancewear was produced, using 5 kinds of patterns for tight pants on the market, to find out the most excellent pattern in appearance and movement performance. Then, the most excellent pattern was again improved to produce a pattern for this study. The result of this study is summarized as follows. 1. Regarding shops where they purchased dancewear exclusive shops accounted for 97%, their average price was ￦30,000 to ￦50,000(51%), and dancewear separated between the upper and lower halves was most preferred(56%). Cotton span was preferably used for a dancewear material(71%), and their dissatisfaction of a fit accounted for 38% which appeared to be highly unsatisfied with its suitability. 2. When S types of experimental dancewear prepared with a comparative pattern were tested by the senses, it was shown that the comparative pattern of experimental wear number 5 with a strip w3s excellent in movement functions and appearance. 3. The basic items necessary to design the tight pants' study pattern were categorized into waist circumference, hip circumference, crotch depth and slacks length. The shrinkages of 15% in width, 10% in crotch length md 20% in inside leg length were applied, respectively, referring to previous studies and the experimental dancewears' comparative patterns. 4. When the improved study pattern for this study was tested by the senses, it showed higher scores in movement functions and appearance than the comparative pattern did, which confirmed the study pattern's improvement of functions and appearance.

• 대한가정학회지
• /
• 제35권1호
• /
• pp.401-414
• /
• 1997

This study examined the transition of costume in middle and high school girls after the abolition of school-uniform. Fashion photographs of $\ulcorner$Junior$\lrcorner$a Korean magazine for girls were used for the investigation. Skirts used mainly were changed in order of pleat tight flare and tight skirt And skirt length was changed in order of knee midi knee and mini. Slim baggy and straight pants together showed high frequency but after 1992 straight pants were used mainly. And pants of ankle length was prevalent. In jacket Hip line natural waist and H-line silhouette dominated. Silhouette of one-piece dress was changed in order or X line H line and A line. Semi fit and natural waist were prevalent. And length was changed in order of midi knee and mini. The coat of H line Loose semi fit and Knee length was the most frequently appeared style. Waist line of coat was changed in order of natural low no natural waist. In skirt blue white black and black were mainly in spring summer fall and winter respectively. In pants blue was used mainly regardless of the season, In jacket blue in spring and black in other seasons were used. In one-piece derss blue in spring red in summer black in fall and winter were used mainly. Black coat was used mainly. Therefore blue was the most frequently used color by middle and high school girls.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.604-612
• /
• 2015

This study investigates preferred bicycle wear designs that can satisfy active senior consumers. A survey was conducted on 50-60's women who periodically rode bicycles. The results indicated a preference for slim designs and red colors. Jacket designs preferences were for a tight fit for size tolerance, stand collar style, and elastic band details for cuff styles. Pants design preferences were for a whole band waist belt type with a tight fit style such as leggings in pants silhouette, zipper details on the side line and ankle length. They also preferred styles with pads attached to underpants in the pad style and the part of the back waist in the pocket position. The survey showed four kinds of jacket design drawings on an ordinal scale rating. Results indicated a preference for set-in variation jackets with the red and gray color combination. Finally, we demonstrated bicycle wear design suggestions. The jacket applied different armhole line colors connected to the sleeve to make the waist slimmer; in addition, stretchable material helped improve armpit part functionality.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.583-591
• /
• 2018

This study investigated the current production of women's sportswear tights among a total of 813 yoga, gym and training tights on the market to provide basic data for the development of women's sportswear tight tops. The results found the following: First, according to the analysis of women's sportswear tight tops by brand, polyester, nylon and polyurethane were most used. In addition, elastic, breathable and quick-dry, sweat absorbent products were commonly found. In terms of design, crew neck and sleeveless styles were popular. In addition, mesh was frequently applied to the top of the chest and upper part of the back. The size was mostly marked in S, M and L, and the size range was very large by brand. For color, achromatic color was most common. In terms of price, 'KRW 50,000-100,000' was frequently found. Second, yoga tights were compared to gym & training wear. In the case of yoga tights, elastic, various products in diverse design (e.g., crew neck, sleeveless, long sleeve, etc.) and colors (e.g., red, black, etc.) made of breathable and water-absorbing fabric were most produced. In particular, a combination of mesh materials was common. In gym and training wear, crew neck and short-sleeve styles in achromatic color made of elastic, breathable and quick-dry, seat absorbing fabric were most produced.

• 한국의류학회지
• /
• 제32권11호
• /
• pp.1771-1781
• /
• 2008

The purpose of this study was to classify the casual image by clothing design elements. This research was done by survey method with 30 kinds of casual image photos selected in fashion magazines. The data was analyzed by Reliability Analysis, Factor Analysis, ANOVA, Duncan's test and MDS. The results of this study are as follows: 1. Casual image was classified by 6 factors. Those were classic-casual, modern-casual, romantic-casual, vintage-casual, sexy-casual and active-casual images. 2. Classic-casual image was well-expressed by A silhouette, fit, chromatic and chromatic color coordinations and hard texture. Modern-casual image was well-expressed by H silhouette, fit and achromatic and achromatic color coordinations. Romantic-casual image was well-expressed by A silhouette, fit and soft texture. Vintage-casual image was well-expressed by H silhouette, combination apparel-fit, chromatic and chromatic color coordinations and fade-out texture. Sexy-casual image was well-expressed by fitted silhouette, tight apparel-fit and combination texture. 3. Casual image was positioned into mostly dynamic and modern on image scale.