• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.101-108
• /
• 2004

The terrestrial nightglow emission in near infrared region were obtained using a Fourier Transform Spectrometer(FTS) at Esrange, Sweden ($67.90^{\circ}$N, $21.10^{\circ}$E) and the OH(4- 2) bands were used to derive temperature and airglow emission rate of the upper mesosphere. For this study, we analyzed data taken during winter of 2001/2002 and performed spectral analysis to retrieve wave information. From the Lomb-Scargle spectral analysis to the measured temperatures, dominant oscillations at various periods near tidal frequency are found. Most commonly observed waves are 4, 6, and 8 hour oscillations. Because of periods and persistence, the observed oscillations are most likely of tidal origin, i.e. zonally symmetric tides which are known to have their maximum amplitudes at the pole.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.286-297
• /
• 2018

In the present study, wave measurements at KOGA-W01 were analyzed and then the numerical wind waves simulations have been conducted to investigate the characteristics of wind waves in the Yellow sea. According to the present analysis, even though the location of the wave stations are close to the coastal region, the deep water waves are prevailed due to the short fetch length. Chun and Ahn's (2017a, b) numerical model has been extended to the Yellow Sea in this study. The effects of tide and tidal currents should be included in the model to accommodate the distinctive effect of large tidal range and tidal current in the Yellow Sea. The wave hindcasting results were compared with the wave measurements collected KOGA-W01 and Kyeockpo. The comparison shows the reasonable agreements between wave hindcastings and measured data, however the model significantly underestimate the wave period of swell waves from the south due to the narrow computational domain. Despite the poorly prediction in the significant wave period of swell waves which usually have small wave heights, the estimation of the extreme wave height and corresponding wave period shows good agreement with the measurement data.

• Journal of Industrial Technology
• /
• v.33 no.A
• /
• pp.23-30
• /
• 2013

Tidal power generation is to produce electrical energy from fluctuations of the ebb and flow in a constructed embankment. More specifically, the sinusoidal variations of tidal flow, along with the periodicity and changes in the height of waves over time make the tidal power generation possible at a certain tidal level. This paper proposes a more practical efficiency test method for tidal power plant generator that utilizes the axis torque changing values rather than the retardation method which is commonly used. The proposed method was compared with the conventional method and the test result shows that proposed method provides a similar accuracy with the conventional retardation method and a better efficiency.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.257-262
• /
• 2002

Numerical model introduced in this study combines wave refraction-diffraction, breaking, bottom friction, lateral mixing, and critical shear stress and three sub-models for simulating waves, currents, and bottom change were briefly discussed. Simulations of beach processes and harbor sedimentation were also described at the coast neighboring Bangpo Harbor, Anmyundo, Chungnam, where the area has suffered from accumulation of drifting sand in a small fishing harbor with a wide tidal range. We also made model test for the case of a narrow tidal range at Nakdong river's estuary area to understand the effect of water level variation on the littoral drift. Simulations are conducted in terms of incident wave direction and tidal level. Characteristics of wave transformation, nearshore current, sediment transport, and bottom change are shown and analyzed. We found from the simulation that the tidal level impact to the sediment transport is very important and we should apply the numerical model with different water level to analyze sediment transport mechanism correctly. Although the model study gave reasonable description of beach processes and harbor sedimentation mechanism, it is necessary to collect lots of field observation data, including waves, tides and bottom materials, etc. for better prediction.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.405-411
• /
• 2000

This study reviews qualitatively the flow characteristics around th tidal gap during seadike closures using a three-dimensional model for shallow water equations. The Princeton Ocean Model(POM) was adapted and applied to the Sihwa Seadike which was closed in 1994. The simulated flow patterns around the gap showed that tidal velocities increase with the cross-sectional area during ebb tide. The accelerated flow extended to wider zones passing the gap, and shock waves were generated. Vertical tidal velocity profiles were affected as the bottom scours developed beyond normal conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.247-258
• /
• 2014

To evaluate the influence of the external force components on the littoral currents in the Gusipo beach, Jeonbuk, West Coast of Korea where a wide tidal sand flat developed, a coupled hydrodynamic model considered real time tidal currents and wave-induced currents was constructed in which the EFDC for tides and tidal currents, the SWAN for waves and the SHORECIRC for wave-induced currents were used as the hindcasting models. A series of field observations for tides, tidal currents and incident waves were carried out and especially to observe the littoral currents in the tidal sand flat, the GPS mounted and light weight drogues were used. Also wind data were collected from the adjacent weather station. To analyze the littoral current components, the numerical drogue tracking results considered real time winds, tides and waves were compared with the field drogue data. The drift speed of numerical drogues was reproduced as the range of 68.0~105.2% compared with the field data and the velocity error of main direction component showed a good result as -16.7~10.0%. As a result, in the mild slope tidal flat including wide surf zone, the tides and winds were the major affection component of the littoral currents, on the other hand, the wave-induced currents seemed the minor component when the incident wave heights were relatively small.

• Korean Journal of Remote Sensing
• /
• v.2 no.2
• /
• pp.95-105
• /
• 1986

The geomorophology of the tidal near $K\breve{u}$m river estuary on the west coast of Korea was studied using satellite images. There Landsat image of different tidal moment were geometrically corrected to be overlapped one another. Then topographic contours were extracted for the analysis with concept of 3-D. According to the morphological analysis, the tidal flats around $K\breve{u}$m river estuary area can be classified in three morphologically different groups: one is developped in a belt type along the shore; another is a delta type in the estuary; the other is developped between the shore line and islands. The morphological characteristics of the tidal flats in the study area seems to be mainly influenced by the tidal dynamics which are very storg on the weatern coastal zone of Korea. However the waves and human activities seem also to be important in some part of the area.

• The Bulletin of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.47.1-47.1
• /
• 2005

• Journal of Environmental Impact Assessment
• /
• v.11 no.4
• /
• pp.247-258
• /
• 2002

This study aimed at verifying the grain-sized distribution of surface deposits in a tidal flat using multi-spectral Landsat TM. In this study, we employed the grain-sized analysis, PCA and unsupervised classification techniques for analyzing the distribution of deposits. As a result in this study, the unsupervised classification method using PCA image was found to be most useful in classifying tidal flat deposits using satellite data. This method is considerably effective in analyzing not only the aspects of distribution in terms of accumulated deposits and erosion, but also the changes in seaside topography and shoreline. The grain-sized distribution analysis indicates that the mud flat inside the Cheonsu-bay tidal flat is distributed, the mixed flat located in the middle, and the sand flat distributed near the sea. The sand flat is dominant around the southern part of Seomot isle and its beach. On the other hand, the mud and mixed flat is dominant on the western part. Likewise, the western coast of Seomot isle and its beach is significantly affected by waves facing the offshore. However, the eastern side of the bay could be a site for the evolution of tidal flat made of fine materials where it is less affected by ocean waves. These results show that multi-spectral satellite data are effective for the classification of distribution materials and environmental impact assessment and continuous monitoring. In particular, the research on environmental deposits can provide important decision-supporting information for decision-making on seaside development, by analyzing the progress of deposits and environmental changes.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.73-83
• /
• 1991

A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.