• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.685-688
• /
• 2003

BaTiO$_3$ 분말을 Ba(OH)$_2$ㆍ8$H_2O$와 아나타제형의 TiO$_2$ㆍx$H_2O$를 이용하여 수열합성법에 의해 제조하였다. Autoclave 반응기를 이용한 본 실험의 경우, BaTiO$_3$ 분말을 생성하기 위해 반응온도, 용질의 농도 등과 같이 BaTiO$_3$ 합성에 관여하는 반응변수를 변화시켜, 각각의 실험조건이 어떠한 영향을 미치는지를 조사하였다 수열합성법에 의해 합성된 BaTiO$_3$의 전화율은 온도와 농도 증가에 따라 높아지는 현상을 보였으며, 열역학적으로 계산된 최대 전화율에 접근하였다. 또한 반응온도와 농도의 증가에 의해 생성된 BaTiO$_3$는 균일한 입도 분포와 구형에 가까운 형상을 나타내었다. 따라서 농도를 높이는 조건이 전화율과 생산성을 모두 높일 수 있는 방법이라는 것을 확인할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.817-821
• /
• 1998

$BaTiO_3$ particles were prepared using $Ba(OH)_2{\cdot}8H_2O$ and $Ti(OC_2H_5)O_4$ by the hydrothermal method and their characteristics treated at the various temperatures have been investigated. This prepared $BaTiO_3$ powder includes a very small amount of $H_2O$ and $OH^-$. By increasing the treated temperature from $200^{\circ}C$ to $1000^{\circ}C$, the mean particle size was accordingly increased from $0.022{\mu}m$ to $0.072{\mu}m$ and the tetrogonality(c/a)was increased from 1.02 to 1.2 so that the phase transition to tetroganal takes place. $BaTiO_3$ sintered at $1250^{\circ}C$ after heat treatment at $400^{\circ}C$ for 3 hrs showed a specific dielectric constant of 8120 and surface activation energy was 9680 kcal/mol.

• Journal of Powder Materials
• /
• v.12 no.4 s.51
• /
• pp.266-272
• /
• 2005

Transition metal ions($Ni^{2+}$, $Cr^{3+}$ and $V^{5+}$) doped $TiO_2$ nanostructured powders were synthesized by mechanical alloying(MA) to shift the adsorption threshold into the visible light region. The synthesized powders were characterized by XRD, SEM, TEM and BET for structural analysis, UV-Vis and photoluminescence spectrum for the optical study. Also, photocatalytic abilities were evaluated by decomposition of 4-chlorophenol(4CP) under ultraviolet and visible light irradiations. Optical studies showed that the absorption wavelength of transition metal ions doped $TiO_2$ powders moved to visible light range, which was believed to be induced by the energy level change due to the doping. Among the prepared $TiO_2$ powders, $NiO^{2+}$ doped $TiO_2$ powders, showed excellent photooxidative ability in 4CP decomposition.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.857-863
• /
• 1998

The BaTiO3 powders extensively used as MLCC (Multilayer ceramic capacitor) in electronic ceramic in-dustry were synthesized by GNP (Glycine-Nitrate process) The powders were prepared using carbonate and alkoxide as starting materials and nitric acid was used as a solvent for starting materials as well as an oxidant for combustion. The BaTiO3 powders were synthesized using different amounts of glycine as a fuel for combustion. The characteristics of synthesized powders were examined with helium pycnometer X-ray diffraction(XRD) Brunauer-Emmett-Teller with N2 adsorption and scanning electron microscopy(SEM). It was found that single phase BaTiO3 could be formed when the as-synthesized powders were heat-treated at 100$0^{\circ}C$ When the glycine/cation molar ratio was 1,2 specific surface area was 24m2/g

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.535-539
• /
• 2002

In this study photoadsorption propreties of Ag ion in AgNO$_3$ solution by TiO$_2$nanopowder synthesized by homogeneous precipitation process at low temperature were investigated. It was found that the photocatalytic redliction in AgNO$_3$solution was occurred by TiO$_2$nanopowder even under th sun light irradiation, although the reduction of Ag ions was slow with th small adsorption of 9.32 ppm. Notably the Ag adsorption was promoted in th dark condition probably owing to the chestnut bur shape of TiO$_2$ nanopowder itself. In the application of UV the Ag ions were completely adsorbed within 120 min, showing more significant photocatalytic reaction. The measured adsorption reaction rate and adsorption equilibrium rate constants were 0.0004 g/min and 1494.20(120 $m^2$/g), respectively.

• Journal of Powder Materials
• /
• v.11 no.3
• /
• pp.247-252
• /
• 2004

Recently, it has been found that mechanical alloying (MA) facilitates the nanocomposites formation of metal-metal oxide systems through solid-state reduction during ball milling. In this work, we studied the MA effect of Fe$_{3}$O$_{4}$-M (M = Al, Ti) systems, where pure metals are used as reducing agents. It is found that composite powders in which $Al_{2}$O$_{3}$ and TiO$_{2}$ are dispersed in $\alpha$-Fe matrix with nano-sized grains are obtained by mechanical alloying of Fe$_{3}$O$_{4}$ with Al and Ti for 25 and 75 hours, respectively. It is suggested that the large negative heat associated with the chemical reduction of magnetite by aluminum is responsible for the shorter MA time for composite powder formation in Fe$_{3}$O$_{4}$-Al system. X-ray diffraction results show that the reduction of magnetite by Al and Ti if a relatively simple reaction, involving one intermediate phase of FeAl$_{2}$O$_{4}$ or Fe$_{3}$Ti$_{3}$O$_{10}$. The average grain size of $\alpha$-Fe in Fe-TiO$_{2}$ composite powders is in the range of 30 nm. From magnetic measurement, we can also obtain indirect information about the details of the solid-state reduction process during MA.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.415-416
• /
• 2001

최근 환경오염에 대한 관심이 고조되면서 VOCs를 비롯한 각종 악취물질 제거에 광촉매가 각광받고 있다. 광촉매는 기존 오염물질 제거기술과는 달리 광촉매 하나로서 복합적인 오염물질을 한꺼번에 분해할 수 있는 장점이 있다. 그러나 미세한 광촉매 분말(powder)은 오히려 분진으로 작용할 수 있고, 회수가 어려워 응용에 있어 상당한 제약을 받는다. 이에 상용화된 TiO$_2$ 분말이나 졸을 지지체에 코팅한 TiO$_2$ 박막으로 광촉매의 응용 범위를 점차 확대해 나가는 추세이다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.412-417
• /
• 2001

본 연구는 습식법으로 수산화 알루미늄과 티타니아를 출발물질로 하여 $Al_2$O$_3$-TiO$_2$복합분체를 제조하였으며, 2 mol의 Al(OH)$_3$분말에 대하여 TiO$_2$분말량을 1, 3, 5, 7, 9, 11 wt%로 첨가하여 $Al_2$O$_3$-TiO$_2$복합분체의 특성을 조사하였다. 제조된 $Al_2$O$_3$-TiO$_2$계 복합분체는 $700^{\circ}C$~140$0^{\circ}C$까지 하소하여 XRD 분석을 한 결과 100$0^{\circ}C$까지는 TiO$_2$(rutile)상과 η-Al$_2$O$_3$상이 공존하다가 110$0^{\circ}C$부터 130$0^{\circ}C$까지는 η-Al$_2$O$_3$에서 $\alpha$-Al$_2$O$_3$로의 상전이가 일어나서 $\alpha$-Al$_2$O$_3$상과 TiO$_2$(rutile)상이 나타났으며 하소온도 140$0^{\circ}C$, TiO$_2$첨가량이 5 wt%일 때부터 $Al_2$TiO$_{5}$가 생성되기 시작하였다. TiO$_2$첨가량에 따른 비표면적값은 첨가량이 7 wt%까지는 감소하였으나 그 이상 첨가시 증가하였다. 입도분석 결과 평균입경은 15.74~23.21$mu extrm{m}$로서 TiO$_2$첨가량이 3 wt%일 때 가장 작은 값을 가졌으며 TiO$_2$첨가량은 5 wt% 이상부터 점차 감소하였다.

• Journal of Powder Materials
• /
• v.6 no.3
• /
• pp.238-245
• /
• 1999

The preparation of $n-TiO_2$ powder by the Chemical Vapor Synthesis process (CVS) was studied using the liquid metal organic precursor (TTIP). The residence time and the collection methods were considered as main processing variables through the experiments. The CVS equipment consisted of a micropump and a flashvaporizer, a tube furnace and a tubular collection device. The synthesis was performed at $1000^{\circ}C$ with various sets of collection zone. The residence time and the total system pressure were controlled in the range of 3~20 ms and 10 mbar, respectively. Nitrogen adsorption, X-ray diffraction and electron microscopy were used to determine particle size, specific surface area and crystallographic structure. The grain size of the as-prepared $n-TiO_2$ powder was in the range of 2~8 nm for all synthesis parameters and the powder exhibited only little agglomeration. The relationship between particle characteristics and the processing variables is reviewed based on simple growth model.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.102-107
• /
• 2016

We demonstrate the electrochromic properties of $TiO_2$ nanotubes prepared by an anodization process and investigate the effects of heat treatment and viologen incorporation on them. The morphology and crystal structure of anodized $TiO_2$ nanotubes are investigated by scanning electron microscopy and X-ray diffraction. As-formed $TiO_2$ nanotubes have straight tubular layers with an amorphous structure. As the annealing temperature increases, the anodized $TiO_2$ nanotubes are converted to the anatase and rutile phases with some cracks on the tube surface and irregular morphology. Electrochemical results reveal that amorphous $TiO_2$ nanotubes annealed at $150^{\circ}C$ have the largest oxidation/reduction current, which leads to the best electrochromic performance during the coloring/bleaching process. Viologen-anchored $TiO_2$ nanotubes show superior electrochromic properties compared to pristine $TiO_2$ nanotubes, which indicates that the incorporation of a viologen can be an effective way to enhance the electrochromic properties of $TiO_2$ nanotubes.