• 한국진공학회지
• /
• 제5권4호
• /
• pp.359-364
• /
• 1996

Pt/Ti/$SiO_2$/Si 기판 위에 r.f. 마그네트론 스퍼터링 방법으로 $300^{\circ}C$이하의 저온에서 SrTiO3 박막을 증착하였다. XRD, RBS, TEM, EPMA로 증착된 박막의 재료적 특성을 분석하였고, Al/$SrTiO_3$/Pt의 구조로 커패시터를 제작하여 전기적 특성을 분석하였다. 기판온도가 증가함에 따라 박막의 결정성과 유전율이 향상되었으나, $200^{\circ}C$이하의 기판온도에서는 Sr이 결핍된 조성을 갖게 되어 증착된 박막이 반도성을 나타내었다. 증착중에 기판에 양의 d.c. 전압을 10~30V 인가함으로써 박막의 결정성이 크게 향상되었고, 유전특성도 개선되었다. $300^{\circ}C$의 기판온도에서 20V의 d.c. bias를 인가하여 증착한 400nm 두께의 $SrTiO_3$ 박막은 <211> 우선방향성을 갖는 주상정 구조와 화학양론적인 조성을 나타내었고, 본 연구에서 가장 우수한 전기적 특성을 보였다. 100 kHz에서 유전율이 98, 유전손실이 3.4%였으며, 3V에서 누설전류는 $10^{-5}A/\textrm{cm}^2$였다.

• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.578-588
• /
• 1993

Highly c-axis oriented ferroelectric PbTiO3 thin films were deposited on MgO single crystal substrates by RF magnetron sputtering. We have studied the effects of substrate temperature, RF input power, gas comosition, gas pressure and deposition rate on the chemical and structural characteristics of PbTiO3 thin films. The epitaxy relationship of c-axis oriented films was found to be PbTiO3{100}//MgO(100) and their microstructures were highly mosaic. It was found that the most important parameter to achieve epitaxial PbTiO3 films was the substrate temperature. The activation energy for the epitaxy formation was about 0.92eV. Lower gas pressure and RF input power were favorable for the formation of epitaxial c-axis orientation. It was also found that the optimum oxygen content in Ar gas was 10% to obtain the stoichiometric PbTiO3 composition.

• 한국분말재료학회지
• /
• 제13권3호
• /
• pp.199-204
• /
• 2006

We manufactured the metal hydrides of $(Ti_{0.88}Mg_{0.12})H_2$ using a very easy and cheap way that Ti-12%Mg blending powder was mechanically milled with liquid milling media such as isopropyl alcohol ($C_3H_8O$, containing oxygen) and hexane ($C_6H_{14}$, no oxygen) as hydrogen source. The $(Ti_{0.88}Mg_{0.12})H_2$ synthesized in isopropyl alcohol contained the high oxygen of 11.2%, while one in hexane had the low oxygen content of 0.7%. Such a difference of oxygen content affected the dehydriding behavior, phase transformation, and microstructural evolution at high temperature, which was investigated through X-ray diffraction and DSC measurements, and electron microscope observations.

• 한국표면공학회지
• /
• 제15권3호
• /
• pp.138-145
• /
• 1982

The effects of the simultaneous variations of the ratio of feed gases(H2/N2 Flow ratio), feed gas flow rate (H2/N2, total-flow rate) and partial pressures of TiCl4 (PTiCl41) as well as deposition time and cobalt content of the substrate on the deposition rate of the TiN Coated Cemented Tungsten Carbide Tools were investigated. Deposition was carried out in the temperature range of 930$^{\circ}C$-1080$^{\circ}C$ and an activation energy of 46.5 Kcal/mole can be calculated. Transverse rupture strength was noticeably reduced by the TiN coating on the virgin surfa-ce of Cemented Tungsten Carbide, the extent of which was decreased according to the coa-ting thickness. Microhardness value observed on the work was in the range of 1700∼2000kg/mm, which were in well agreement with the value of bult TiN. The wear resistance of TiN layers was performed by turning test and it was observed that crater and flank resistance remarkably enhanced by TiN coating.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.373-378
• /
• 2000

실리콘 기판 위에서 $TiO_2$와 $Bi_2O_3$의 박막 성장은 반응속도론 측면에서 커다란 차이를 보였지만, $Bi_4Ti_3O_{12}$(BIT) 박막의 성장은 주로 $TiO_2$ 성장 거동에 의해 지배를 받았다. 그 결과 BIT 박막은 bismuth가 부족한 조성을 가지게 되었다. 박막 내에 부족한 bismuth의 양을 보충해줌으로써 이러한 문제점을 해결하고자 펄스 주입 유기 금속 화학 기상 증착(MOCVD) 방법을 사용하였다. 이러한 펄스 주입법에 의해 bismuth의 양은 증가하였고 또한, 박막의 깊이 방향으로의 조성이 균일해졌고 $Bi_4Ti_3O_{12}$과 Si사이의 계면이 향상되었다. 게다가, $Bi_4Ti_3O_{12}$ 박막의 결정성은 크게 향상되었고 누설 전류 밀도는 연속 주입법에 비해 1/2에서 1/3정도 낮아졌다. 시계 방향의 C-V 이력 곡선이 관찰되었고 이로 인해 펄스 주입법에 의해 증착된 $Bi_4Ti_3O_{12}$ 박막은 강유전성에 의해 스위칭이 됨을 알 수 있었다.

• 한국재료학회지
• /
• 제11권3호
• /
• pp.215-220
• /
• 2001

본 실험에서는 반응성 스퍼터링법으로 $N_2$/Ar 유속비를 달리하여 약 200 과 650 두께의 비정질 Ti-Si-N막을 증착한 후 Cu (750 )와 Si사이의 barrier 특성을 면저항측정, XRD, SEM, RBS 그리고 Ti-Si-N막에서 질소 함량의 영향에 초점을 둔 ABS depth profiling 등의 분석방법을 통해 조사되었다. 질소 함량이 증가함에 따라 처음에는 불량 온도가 46%까지 증가하다가 그 이상에서는 감소하는 경향을 보였다. 650 의 Ti-Si-N barrier막을 80$0^{\circ}C$에서 열처리 후에는 Cu$_3$Si 피크만 관찰될 뿐 Cu피크는 거의 완전히 사라졌으므로 Barrier 불량기구는 Cu$_3$Si상을 형성하기 위해 Si 기판내로의 Cu의 확산에 의해 일어난 것으로 보인다. 본 실험에서 Ti-Si-N의 최적 조성은 $Ti_{29}$Si$_{25}$N$_{46}$이었다. 200 과 650 두께의 $Ti_{29}$Si$_{25}$N$_{46}$ barrier 층의 불량온도는 각각 $650^{\circ}C$와 $700^{\circ}C$이었다.이었다.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.947-953
• /
• 1998

The microwave dielectric properties of X BaO-0.15($Nd_{0.87}Bi_{0.13})_2O_3-(0.85-X)TiO_2 (X=0.14~0.17) and 0.16BaO-0.15(Bi_xNd_{1-x})_2O_3-0.69TiO_2$ (X=0.12~0.15) ceramics sintered at 1320~$1380^{\circ}C$ were investigated. The microwave dielectric properties of X BaO-0.15(Nd_{0.87}Bi_{0.13})_2O_3-(0.85-X)TiO_2$ (X=0.14~0.17) can be controlled effectively by adjusting X content : with increasing X from 0.14 to 0.17 both dielectric constant and temperature coefficient of resonant frequency decreased from 94.6 to 86 and from 22 ppm/^${\circ}C to -7 ppm/^{\circ}C$, respectively, while quality factor increased from 1300 to 1920 (at 4GHz). The microwave dielectric properties of 0.16BaO-0.15(Bi_x/Nd_{1-x2}O_3 -0.69TiO_2$ (X=0.12~0.15) can be controlled effectively by adjusting X content : with increasing X from 0.12 to 0.15 both quality factor and temperature coefficient of resonant frequency decreased from 1920 to 1430 and from 9 ppm/^${\circ}C to -10 ppm/^{\circ}C$, respectively, while dielectric constant increased from 87.5 to 92.6.

• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.28-33
• /
• 2022

Aluminum-based powders have attracted attention as key materials for 3D printing owing to their low density, high specific strength, high corrosion resistance, and formability. This study describes the effects of TiC addition on the microstructure of the A6013 alloy. The alloy powder was successfully prepared by gas atomization and further densified using an extrusion process. We have carried out energy dispersive X-ray spectrometry (EDS) and electron backscatter diffraction (EBSD) using scanning electron microscopy (SEM) in order to investigate the effect of TiC addition on the microstructure and texture evolution of the A6013 alloy. The atomized A6013-xTiC alloy powder is fine and spherical, with an initial powder size distribution of approximately 73 ㎛ which decreases to 12.5, 13.9, 10.8, and 10.0 ㎛ with increments in the amount of TiC.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.277-279
• /
• 1996

A.C. and D.C. characteristic of TiO$_2$ added SnO$_2$ are investigated to study the electrical properties. The electrical inductivity increases as TiO$_2$content increase. The doer effect of TiO$_2$ is crucial role for the increase of electrical conductivity. The frequency-dependent ac inductivity increases with the increase of TiO$_2$ contents at low frequency region. However, at high frequency region, the difference of ac conductivity is very small. Impedance spectrums are consist of the one semicircle. Therefore, the sizes of semicircle decreases with increasing the TiO$_2$ contents.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.743-754
• /
• 1996

In this study (Ba1-xPbx)TiO3 was synthesized by modified oxalate process in order to prevent vaporization of PbO through low temperature synthesis climinate Cl ion reproducibly substitute Pb for by and uniformly distribute ion (Ba1-xPbx)TiO3 was synthesized by coprecipitation of lead acetate barium acetate and ammonium titanyl oxalate have been used as starting materials. The substitution of Pb for Ba was reproducibly possible synthetic temperature of perovskite structure becomes lowed as the Pb concentration increases and fine partic-les (specific surface are :7.2 cm2/g) were obtained, BaTiO3 powders calcined at 90$0^{\circ}C$ for 3 hours were cubic from in XRD analysis and as Pb content was increases evident split of tetragonal peaks could be observed The optimum conditions to synthesize (Ba,Pb)TiO3 powder are the followings ; synthesis temperature (5$^{\circ}C$)