• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.76-76
• /
• 2009

PZT세라믹스는 높은 압전특성과 우수한 큐리온도($400^{\circ}C$)를 보유하고 있어 오래시간에 걸쳐 주목받고 있다. 현재 압전변압기, 액츄에이터, 센서등의 압전소자는 PZT를 이용하여 제작하고 있지만 PZT는 고온 소결시 PbO의 휘발이 환경오염을 초래하며 인체의 유해하다는 연구결과가 나왔다. 이에 최근에는 PbO가 포함 되지않은 무연(lead-free)계 압전세라믹스가 주목받고 있다. 무연 압전 세라믹스의 종류로는 Bi-layer-structured ceramics, Bi-perovskite type ceramics, NKN base ceramics 가 존재하고 있다. 그 중 $(Na_{0.5}K_{0.5})NbO_3(NKN)$ 세라믹스는 높은 큐리온도와($400^{\circ}C$)와 높은 전기기계 결합계수(약 36%)를 보유하고 있어 많은 연구가 이루어 지고 있다. 하지만 NKN은 PZT에 비하여 치밀성이 낮으며 일반적인 산화물 소결방법으로는 밀도를 높이기가 어려운 단점이 존재한다. 이를 개선하기 위한 방법으로 hot pressing와 spak plasma sintering, RTGG와 같은 방법으로 밀도를 높일수 있지만 비용이 많이 들어 일반적으로 사용이 어렵다. 다른 방법으로 NKN에 첨가물을 넣는 방법을 사용하고 있는데 방법으로 $LiNbO_3$, $LiTiO_3$, $LiSbO_5$를 첨가하여 개선하는 방법이 있다. 본 실험은 첨가물을 넣는 방식으로 비화학양론적 $(Na_{0.5}K_{0.5})_{0.97}(Nb_{0.9}Ta_{0.1})O_3(NKNT)$조성에 CuO를 mol%로 변화주어 유전 및 압전 특성을 조사하였다.

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.230-234
• /
• 2007

Cordierite ceramics were fabricated via a reaction sintering process using ceramics-filled polysiloxane as a precursor for cordierite ceramics. In this study, the effects of the additive composition, additive content, and sintering temperature on the sintered density and compressive strength of cordierite ceramics have been investigated The sintered densities of reaction-sintered cordierite ceramics containing $TiO_2$ as an additive were insensitive to the additive composition, additive content, and sintering temperature and ranged from $1.92g/cm^3\;to\;2.06g/cm^3$. In contrast, the cordierite ceramics containing $Y_2O_3$ showed a maximal density of $2.21g/cm^3$ at 5 wt% addition and at a sintering temperature of $1400^{\circ}C$. The compressive strength of cordierite ceramics showed the same tendency with the density. Typical compressive strength of cordierite ceramics containing 5 wt% $Y_2O_3$ as a sintering additive and sintered at $1400^{\circ}C\;was\;{\sim}480MPa$.

• Journal of Power Electronics
• /
• v.8 no.4
• /
• pp.363-370
• /
• 2008

In this paper, three kinds of PWM strategies for a three-phase current-fed dc/dc converter are proposed and compared in terms of losses and voltage transfer ratio. Each PWM strategy is described graphically and their switching losses are analyzed. With the proposed PWM C strategy, one turn-off switching of each bridge switch is eliminated to reduce switching losses under the same switching frequency. In addition, RMS current through the bridge switches is lowered by using parallel connection between two bridge switches and thus, conduction losses of the switches are reduced. Further, copper losses of the transformer are decreased due to the reduced RMS current of each transformer's winding. Therefore, total losses are minimized and the efficiency of the converter is improved by using the proposed PWM C strategy. Digital signal processor (DSP: TI320LF2407) and a field-programmable gate array (FPGA: EPM7128) board are used to generate PWM patterns for three-phase bridge and clamp MOSFETs. A 500W prototype converter is built and its experimental results verify the validity of the proposed PWM strategies.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.329-338
• /
• 2013

In this paper, the charging characteristics of series resonant type high voltage capacitor chargers considering the transformer stray capacitance have been studied. The principles of operation for the four operational modes and the mode changes for the four different switching frequency sections are explained and analyzed in the range of switching frequency below the resonant frequency. It is confirmed that the average charging currents derived from the above analysis results have non-linear characteristics in each of the four modes. The resonant current, resonant voltage, charging current, and charging time of this capacitor charger as variations of the switching frequency, series parallel capacitance ratio ($k=C_p/C_s$), and output voltage are calculated. From the calculation results, the advantages and disadvantages arising from the parallel connection of this stray capacitance are described. Some methods to minimize charging time of this capacitor charger are suggested. In addition, the results of a comparative test using two transformers whose stray capacitances are different are described. A 1.8 kJ/s prototype capacitor charger is assembled with a TI28335 DSP controller and a 40 kJ, 7 kV capacitor. The analysis results are verified by the experiment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.577-580
• /
• 2015

In this paper, in order to develop the composition ceramics with the outstanding piezoelectric properties, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$ ceramics substituted with $BiFeO_3$ were prepared by the conventional solid-state reaction method. The addition of small amount of $Li_2CO_3$ and $CaCO_3$ as sintering aids decreased the sintering temperature of the ceramics. The effects of $BiFeO_3$ substitution on their piezoelectric and dielectric properties were investigated. when 0.015 mol $BiFeO_3$ was substituted, the optimal physical properties of $d_{33}=590pC/N$, $E_c=8.78kV/mm$ were obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.419-422
• /
• 2000

This paper was to measure the structure, piezoelectric properties of 0.05Pb($A1_{0.5}$$Nb_{0.5}$)-0.95Pb($Zr_{0.52}$$Ti_{0.48}$)$O_3$ ceramics dopped with additive after creating the specimens with a general method. It is shown that X-ray diffraction pattern variation of lines (200) have tendency to move in simple peak by addition of additive. According to the increase of $Cr_2$$O_3$, tetragonality hardly have variation, according to the increase of $Fe_2$$O_3$, tetragonality decreased on the whole. According to dopping with $Cr_2$$O_3$ and $Fe_2$$O_3$, electromechanical factor(kp) largely increased, in case of sintering at $1200^{\circ}C$ kp was maximum value of 40.04[%] at $Cr_2$$O_3$ 0.3wt%, and maximum value of kp 42.9 [%] at $Fe_2$$O_3$, 0.9wt%. In case of sintering at 120$0^{\circ}C$, mechanical duality factor(Qm) was maximum value of Qm 268.8 at $Cr_2$$O_3$, 0.9 wt%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1462-1467
• /
• 2007

This study investigated the effect of chemical treatments on tannins (condensed and hydrolysable) and on the trypsin inhibitor (TI) activity in salseed meal. Triplicate samples of ground salseed meal (1 kg) were mixed with 820 ml of either distilled water (pH 5.3), 0.67 M acetic acid (pH 2.4), 0.67 M sodium bicarbonate (pH 8.2) or 2% polyvinyl-pyrrolidone (PVP) solution. The material was placed in airtight plastic containers and incubated at $37^{\circ}C$ for 0, 3, 6, 12, 24, 48 and 72 h. Samples of untreated salseed meal which had not been subjected to soaking or incubation were run through the analysis to serve as control. Addition of water, acetic acid, sodium bicarbonate and PVP solutions to salseed meal and subsequent anaerobic incubation at $37^{\circ}C$ significantly reduced chemically detectable tannins. At each incubation time, alkali solution was more effective than its counterparts. The effect of acidic solution on hydrolysable tannin was least among the treatments. All the treatments reduced TI activity of salseed meal. The reduction in TI activity by these treatments was similar and ranged between 80-84%. Treatment time effected a decrease in the contents of antinutritional substances. However, the effect of the treatment with the reagents, even for zero incubation time, was quite pronounced. It may be concluded from the present results that the treatment of salseed meal with sodium bicarbonate (0.67 M) is more effective in reducing hydrolysable and condensed tannin contents than PVP, water and acid solutions. Treatment with sodium bicarbonate solution is more economical and easier to handle than acid and PVP treatments. Incubation of the treated material for 12 h is reasonably effective, economical and safe from any mould growth.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.215-221
• /
• 2019

Ceramic tiles, which are widely used as interior and exterior materials for construction, have recently been required to have pollution prevention function. In order to remove contaminants, many researches of ceramic tiles with hydrophilic surface property through $TiO_2$ coating and hydrophobic surface property by improving the flow of water droplets have been proceeded. Expecially, it is very important to develop a surface glaze having hydrophobicity through a sintering process above $1000^{\circ}C$ without an additional coating process and the degradation of mechanical properties. In this study, surface glaze with copper powder was applied to manufacture of ceramic tile. Contact angle of ceramic tile according to thickness of surface glaze layer was investigated after the conventional sintering process. The contact angle of the ceramic tile surface without the copper powder was shown to be $25.3^{\circ}$, which is close to hydrophilic surface. However, the contact angle was increased up to $109.8^{\circ}$ when the thickness of surface glaze with the copper powder was $150{\mu}m$. The excellent hydrophobic property of the surface glaze with copper powder was resulted from the cellular structure of copper particles on the glaze surface. In addition, the mechanical properties of the developed hydrophobic ceramic tiles such as bending strength, chemical resistance, abrasion resistance, and frost resistance were well maintained and meet the criteria of 'KS L 1001 Ceramic tile'.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.813-818
• /
• 2008

Various additives were added in small amounts on Ni/YSZ anode of SOFC (solid oxide fuel cell) in order to improve reactivity and to inhibit deactivation due to coke deposition during methane reforming using a low mole ratio steam ($H_2O/CH_4=1.5$) at $800^{\circ}C$. Ni/YSZ catalysts added with various perovskites did not show any improvement but exhibited a gradual decrease in the methane conversion. K-doped Ni/YSZ showed a steady increase and maintenance of the conversion up to 42 hours, after which there was an abrupt deactivation of catalyst owing to potassium loss by volatilization. Addition of 5% of $K_2Ti_2O_5$ on Ni/YSZ showed a stable maintenance of the conversion without K loss, and was able to prevent coke formation during a long time operation. Deactivation of catalyst during the reaction was mainly caused by the accumulation of graphidic carbon on the catalyst surface.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1661-1663
• /
• 2000

This study was to measure the dielectric characteristics of 0.05Pb($Al_{0.5}Nb_{0.5}$)-0.95Pb($Zr_{0.52}Ti_{0.48})O_3$[PAN-PZT] system ceramics according to the variation of $Cr_{2}O_3$, $Fe_{2}O_3$ addition amount. 0.0$\sim$1.2[wt%] and according to sintering temperature after creating the specimens with a general sintering way. The results of this study were summarized as follows : the dielectric constant at 20[$^{\circ}C$] reduced dy increasing additive on the whole. The dielectric loss was minimum value of 12.77[%], sintered at 1200[$^{\circ}C$], dopped with $Cr_{2}O_3$ 0.3[wt%] and minimum value of 10.89[%], sintered at 1200[$^{\circ}C$], dopped with $Fe_{2}O_3$ 0.6[wt%]. The variation rate of dielectric constant according to the change of frequency was decreased slowly by increasing frequency. The temperature coefficient of capacitance turned out increasing the stability of the temperature, decreased $Cr_{2}O_3$ 0.3wt% showed its minimum value 0.59[%/$^{\circ}C$], the maximum value 0.9[%/$^{\circ}C$] with $Cr_{2}O_3$ 3wt%.