• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.128-130
• /
• 1993

This paper presents the discharge characteristics of FTS system under verious discharge condition. E1ectron temperature and electron density are studied by double probe method. The Characteristics of discharge occurrence vol-tage and discharge current are significantly affected by magnetic flux density. And the best TiN thin film is obtained at 700[Vl, 400[gauss] and 1.0[mtorr].

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.105-109
• /
• 2003

Electrical properties of Ni/Au/p-GaN and optical properties of epitaxial GaN MQW LED on sapphire were characterized. At 20 mA forward bias, GaN MQW emitted in the blue at 470 nm. Current-voltage (I-V) characteristics were decreased linearly with the annealing temperature. The resistivity of Ni/Au contacts was found by TLM measurements to be of device quality (2×10/sup -1/Ωㆍcm).

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.453-454
• /
• 1999

최근 대기 환경오염이 심각한 문제로 부각됨에 따라 독성 유기물질 분해 및 제독에 반도체 광촉매를 이용한 광산화기술(Advanced Oxidation Process, AOP)을 적용한 연구가 활발히 진행되고 있다. 1972년 Fujishima와 Honda가 전압을 걸어준 TiO$_2$ 단결정 전극상에 자외선을 쪼이면 물이 수소와 산소로 광분해되는 것을 발견한 이후 분균일 광촉매반응(Heterogeneous Photocatalysis)에 관한 연구가 시작되었다.(중략)

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.251-264
• /
• 2000

Organic removal from synthetic wastewater by electrochemical methods was investigated with various operating parameters, such as current density, retention time, electrode gap and $Cl^-/COD_{Cr}$ ratio. In electrolysis, dioxide iridium coated titanium ($IrO_2/Ti$) and stainless steel plate were used for anode and cathode respectively. The $COD_{Cr}$ removal efficiencies between plate type anode and net type anode were about same effect, but electrolytic power using net type anode is low than plate type anode. The $Cl^-/COD_{Cr}$ ratio was about $1.3kgCl^-/kgCOD_{Cr}$ when organic removal obtained 70 %, $Cl^-/COD_{Cr}$ ratio needs $2.2kgCl^-/kgCOD_{Cr}$ so as to organic completely remove. The removal efficiency of organics increased with current density, retention time and $Cl^-/COD_{Cr}$ ratio, but decreased with increasing electrode gap. The relationship of operating conditions and $COD_{Cr}$ removal efficiencies are as follows. $$COD_{Cr}(%)=80.0360(Current\;density)^{0.4451}{\times}(HRT)^{0.8102}{\times}(Gap)^{-0.4915}{\times}(Cl^-/COD_{Cr})^{0.5805}$$ There existed a competition between the removals for $COD_{Cr}$ and ammonium during electrolysis, the removal of ammonium was shown to be dominant and $COD_{Cr}$ removal was low. But $COD_{Cr}$ removal was raised as addition of alkalinity.

• Journal of Environmental Science International
• /
• v.17 no.6
• /
• pp.581-589
• /
• 2008

This study was carried out to evaluate the effect of water quality of cooling tower on Legionella pneumophila disinfection using Ru/Ti electrode. The influences of parameters such as pH, turbidity, $CaCO_3$ and TOC were investigated using laboratory scale batch reactor. Oxidants such as free Cl, $ClO_2,\;H_2O_2\;and\;O_3$ were measured. The results showed that all of the water quality parameters of cooling tower had deteriorated disinfection of Legionella pneumophila. When the turbidity, $CaCO_3$ and TOC was increased, oxidants which was generated during electrolysis was decreased. pH, free Cl, $ClO_2\;and\;H_2O_2$ concentration were decreased with the increase of pH, whereas $O_3$ concentration was increased with the increase of pH. The order of effect of water quality on the disinfection performance for Legionella pneumophila was turbidity > $CaCO_3$ > TOC > pH. To obtain the safety standard (1000 CFU/L), the simultaneous increase current and NaCl dosage was needed.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.67-78
• /
• 1996

제 3원소가 첨가된 금속간 화합물 TiAI 금속간 화합물 분말을 PREP법(플라즈마 회전전극법)으로 제조하여, 통.방전 강압소결법에 의해 치밀한 소결체를 만들었다. 이에 대해 첨가 원소의 종류와 열처리에 따른 고온 및 상온 압축 특성의 변화를 조사하였다. 소결체의 미세조직은 ${\gamma}$/$\alpha$2 lamella로 이루어진 완전 변태구조였고, 결정립의 크기는 140-150$\mu\textrm{m}$였으며 계단형 결정립계를 나타내었다. 소결체를 ($\alpha$+${\gamma}$)구역인 130$0^{\circ}C$에서 2시간 동안 열처리한 결과, 모든 조성의 시편이 등축점 ${\gamma}$와 lamella로 이루어진 전형적인 duplexrn조로 변태하였다. 상온 압축 시험에서 시편은 파괴될 때까지 가공경화 현상이 나타났으며, Cr을 첨가한 시편이 가장 큰 파괴응력과 변형률을 나타내었다. 한편, 고온 압축 시험의 경우 온도상승 때문에 가공경화의 속도가 감소되었고, 80$0^{\circ}C$에서는 가공경화와 회복이 균형을 이루는 소위 정상 상태의 변형을 보였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.749-752
• /
• 2009

Anodized tubular titania ($TiO_2$) electrodes (ATTEs) are prepared and used as both the photoanode and the cathode substrate in a photoelectrochemical system designed to split water into hydrogen with the assistance of an enzyme and an external bias (solar cell). In particular, the ATTE used as the cathode substrate for the immobilization of the enzyme is prepared by two methods; adsorption and crosslinking. Results show that the optimized amount of enzyme is 10.98 units for the slurried enzyme, 3.66 units for the adsorbed one and 7.32 units for the crosslinked one, and the corresponding hydrogen evolution rates are 33.04, 148.58, and 234.88 umol/hr, respectively. The immobilized enzyme, specifically the chemically crosslinked one, seems to be much superior to the slurried enzyme, due to the enhanced charge-transfer process that is caused by the lower electrical resistance between the enzyme and the ATTE. This results in a greater number of accepted electrons and a larger amount of enzymes able to deal with the electrons.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.176-180
• /
• 2006

[ $(Na_{0.5}Bi_{0.5})TiO_3$ ][NBT] thin films were prepared on a highly (100) oriented $LaNiO_3[LNO]$ by sol-gel process. X-ray diffraction patterns of the NBT films annealed above $600^{\circ}C$ for 5 minutes have confirmed a highly (100) oriented growth and pseudocubic structure (a=3.884${\AA}$). The (l00) orientation factor increased from 90 to $99\%$ with increasing soaking time from 5 to 60 minutes at $600^{\circ}C$. The NBT films ($600^{\circ}C$/5 min,) have a flat and dense microstructure with large columnar grains, and their grain size are about 44 nm. The Au/NBT/LNO/Si hetero structure sample show a ferroelectric properties.

• Transactions of the Korean hydrogen and new energy society
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1994

Lattice structure, hydrogen absorption characteristics, discharge capacity and cycle life of $V_{22}Ti_{16}Zr_{16}Ni_{39}X_7$(X= Cr, Co, Fe, Mn, Al) alloys were investigated. The matrix phases of these alloys were the C14 Laves phase. Chromium-containing alloy had a vanadium-rich phase in addition to the Laves phase. The chromium, maganese, or aluminum-containing alloys had lower hydrogen equilibrium pressure and larger hydrogen absorption content than the cobalt or iron-containing alloys. The discharge capacities of these alloys were 270~330mAh/g. The discharge capacity according to the alloying element X decreased in the order of Mn>Cr>Co, Al)Fe. The charge/discharge cycle lives of the chromium, cobalt or iron-containing alloys were longer than those of maganese or aluminum-containing alloys due to the lower vanadium dissolution rate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.26-27
• /
• 2008

본 연구는 투명전도성전극(TCO)인 ITO를 대체하기 위해 ZnO에 $Al_2O_3$, $SiO_2$, $TiO_2$의 불순물을 도핑하여 박막의 전기적 및 광학적 특성에 관한 연구를 하였다. 불순물 도핑은 2wt.%로 진행 하였고, 동일한 전압과 두께로 그 특성을 비교 하였으며, 특성으로는 UV-Vis를 이용한 광투과율 측정과 광투과율을 이용한 박막의 광학적 밴드갭과 굴절률을 계산 하였다. 전기적 특성으로는 4-Point Probe로 면저항과 비저항값을 측정하였다.