• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.101-106
• /
• 2006

본 논문은 TCO(thrust cut-off) 시스템을 장착한 로켓 모터의 성능설계에 관한 연구로서, TCO 포트 크기에 따라 변화하는 로켓의 성능을 평가하였다. 시험용 로켓 모터를 제작하여 연소시험을 행하였고, TCO 포트 크기에 따른 추력변화의 경향을 분석하여 최대 역방향 추력점이 존재함을 밝혀내었으며 보존방정식을 이용하여 TCO 성능설계 및 시험분석을 행하였다. 이와 같은 성능설계 기법은 향후 유사한 TCO 시스템의 설계에 유용하게 적용될 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.53-56
• /
• 2006

본 논문은 TCO(thrust cut-off) 시스템을 장착한 로켓 모터의 성능설계에 관한 연구로서, TCO 포트 크기에 따라 변화하는 로켓의 성능을 평가하였다. 시험용 로켓 모터를 제작하여 연소시험을 행하였고, TCO 포트 크기에 따른 추력변화의 경향을 분석하여 최대 역방향 추력점이 존재함을 밝혀내었으며 보존방정식을 이용하여 TCO 성능설계 및 시험분석을 행하였다. 이와 같은 성능설계 기법은 향후 유사한 TCO 시스템의 설계에 유용하게 적용될 수 있다.

• 한국소음진동공학회논문집
• /
• 제21권3호
• /
• pp.258-263
• /
• 2011

The direction of the cutting tool plays a critical role in elliptical vibration cutting(EVC) where the cutting tool cuts workpiece in a trochoidal motion. In this study, EVC cutting device was developed using two parallel piezoelectric materials and it was observed that the rotation direction of the tool reverses as the EVC device undergoes resonance at which either flexural(cutting direction) or longitudinal( thrust direction) mode shapes occurs. To analytically explain reversal of the rotation direction, kinematic motion analysis of the tool was modified to incorporate amplification of the vibration amplitude and phase introduced by resonance. It successfully demonstrated, through Matlab simulation, reversal of the rotation direction of the cutting tool as the excitation frequency increases beyond resonance frequencies at which either flexural or longitudinal vibration occurs.

• 소음진동
• /
• 제9권5호
• /
• pp.936-942
• /
• 1999

Unstable torsional vibration on the marine ship's propulsion shafting system with diesel engine occurred due to a slippage of multi-friction clutch which was installed between increasing gear and shaft generator. In this paper, the mechanism of this vibration was verified via torsional, whirling, axial and structural vibration measurements of shafting system and noise measurement of gear box. And it was also identified by the theoretical analysis method.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.498-511
• /
• 2017

This work conducts a validation study for loads analysis of the UH-60A slowed rotor at high advance ratios. The nonlinear flexible multibody dynamics analysis code, DYMORE II, is used with a freewake model for the rotorcraft comprehensive analysis. Wind tunnel test data of airloads and structural loads of a full-scale UH-60A slowed rotor are used for this validation study. This analysis predicts well the thrust reversal phenomenon at the advance ratio of 1.0. The section airloads such as normal forces and pitching moments and the oscillatory blade structural moments in this analysis are compared well or moderately with the measured data, although the higher harmonics components of blade torsion moments are not captured well. This validation study assesses the prediction accuracy and investigates the unique aeromechanics characteristics of a slowed rotor at high advance ratio.

• 한국정밀공학회지
• /
• 제27권7호
• /
• pp.94-100
• /
• 2010

This paper describes the design and evaluation procedure of an ultra-precision rotary table for freeform generating machined tools. Design of the thrust and journal hydrostatic bearings and experimental evaluation of the table were performed. To get the compact size and less lost motion direct drive servomotor with ultra precision encoder. From the considered design, following performance were confirmed by experiment. The total stiffness of the prototype rotary table was 483.6 $N/{\mu}m$ and 97.6 $N/{\mu}m$ for axial and radial direction, respectively. Rotational accuracy of the table was investigated by capacitive sensor and reversal measurement technique, and 0.10 ${\mu}m$ radial direction and 0.05 ${\mu}m$ axial direction of the rotational accuracy were confirmed. The micro resolution of the table was also investigated with displacement of capacitive sensor, and $0.5/10000^{\circ}$ of micro resolution was confirmed. Index accuracy of the table was evaluated by the autocollimator and polygon mirror, and the $\pm0.39$ arcsec accuracy and $\pm0.16$ arcsec repeatability of the table were confirmed. Those are under the general requirements of ultra precision rotary tables for freeform generating machined tools.