• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.117-128
• /
• 2006

For the legacy IEEE 802.15.3 WPAN protocol, an unpredictable piconet coordinator(PNC) leaving from a piconet without a proper handoff procedure causes an absence of PNC, and thus the piconet gets collapsed. In addition, several beacons from PNCs in adjacent piconets may be collided on a device(DEV) located between those piconets. This beacon collision eventually makes the DEV leave from the piconet. To remedy these two problems, we here propose an Active Seamless Coordinator Switching(ASCS) scheme and a PNC HB based Beacon Alignment(PHBA) one. In the ASCS scheme, a PNC assigns a number of DEVs as next possible PNCs in sequence for provisioning against the abrupt breakdown of the current active PNC. Each nominated DEV proactively sends a probe frame to confirm the operation status of the active PNC. For the case of no response from the PNC, the nominated DEV tries to become a new PNC immediately. In the second PHBA scheme, each PNC is allow to broadcast a special Heart Beat(HB) frame randomly during a superframe period. When a DEV receives a HB frame from other PNC, it promptly sends the related PNCs a special Hiccup Beat(HCB) frame with the superframe information of its associated PNC. As a result, the HCB frame makes both PNCs align their superframe beginning time in order to yield no more beacon collisions. For these two proposed schemes, we show the performance by simulations. We can confirm the enhancement of throughput for each superframe and average frame transfer delay, since each scheme can reduce the duration of piconet collapse. Finally, it is worth while to note that the proposed schemes can be operated with frames those are permitted in the legacy WPAN standard.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.10
• /
• pp.277-284
• /
• 2021

Recently, the smart home environment is expected to be a platform that collects, integrates, and utilizes various data through convergence with wireless information and communication technology. In fact, the number of smart devices with various sensors is increasing inside smart homes. The amount of data that needs to be processed by the increased number of smart devices is also increasing, and big data processing systems are actively being introduced to handle it effectively. However, traditional big data processing systems have all requests directed to cluster drivers before they are allocated to distributed nodes, leading to reduced cluster-wide performance sharing as cluster drivers managing segmentation tasks become bottlenecks. In particular, there is a greater delay rate on smart home devices that constantly request small data processing. Thus, in this paper, we design a Apriori-based big data system for effective data processing in smart home environments where frequent requests occur at the same time. According to the performance evaluation results of the proposed system, the data processing time was reduced by up to 38.6% from at least 19.2% compared to the existing system. The reason for this result is related to the type of data being measured. Because the amount of data collected in a smart home environment is large, the use of cache servers plays a major role in data processing, and association analysis with Apriori algorithms stores highly relevant sensor data in the cache.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.452-461
• /
• 2005

In the star VPN (Virtual Private Network) topology, the traffic between the communicating two CPE(Customer Premise Equipment) VPN GW(Gateway)s nay be inefficiently transferred. Also, the Center VPN GW nav erperience the overload due to excessive packet processing overhead. As a solution to this problem, a direct tunnel can be established between the communicating two CPE VPN GWs using the IKE (Internet Key Exchange) mechanism of IPSec(IP Security). In this case, however, the tunnel establishment and management nay be complicated. In this paper, we propose a mechanism called' SVOT (Star VPN On-demand Tunnel)', which automatically establishes a direct tunnel between the communicating CPE VPN GWs based on demand. In the SVOT scheme, CPE VPN GWs determine whether it will establish a direct tunnel or not depending on the traffic information monitored. CPE VPN GW requests the information that is necessary to establishes a direct tunnel to the Center VPN GW Through a simulation, we investigate the performance of the scheme performs better than the SYST scheme with respect to scalability, traffic efficiency and overhead of Center VPN GW, while it shows similar performance to the FVST with respect to end-to-end delay and throughput.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.89-101
• /
• 2014

Recently, as domestic air traffic dramatically increases, the need of ATC(air traffic control) systems has grown for safe and efficient ATM(air traffic management). Especially, for smooth ATC, it is far more important that performance of display system which should show all air traffic situation in FIR(Flight Information Region) without additional latency is guaranteed. In this paper, we design a ASTERIX(All purpose STructured Eurocontrol suRveillance Information eXchange) parsing module to promote stable ATC by minimizing system loads, which is connected with reducing overheads arisen when we parse ASTERIX message. Our ASTERIX parsing module based on pattern matching creates patterns by analyzing received ASTERIX data, and handles following received ASTERIX data using pre-defined procedure through patterns. This module minimizes display errors by rapidly extracting only necessary information for display different from existing parsing module containing unnecessary parsing procedure. Therefore, this designed module is to enable controllers to operate stable ATC. The comparison with existing general bit level ASTERIX parsing module shows that ASTERIX parsing module based on pattern matching has shorter processing delay, higher throughput, and lower CPU usage.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.348-359
• /
• 2007

The conventional mobile VPN services assumed the mobile communications occur between the MN in foreign networks and the CN in the home network. However, if a MN wants to communicate with another MN in a foreign network, it could degrade the performance of the mobile VPN service because of the triangular routing problem. In this paper, we propose a route optimization mechanism based on the mobile VPN using an x-HA allocated by diameter MIP in order to support the efficient communication between the mobile VPN users in foreign networks. The i-HA maintains the VPN-TIA as well as the x-HoA as the CoAs to solve the security problem and to provide an efficient route optimization simultaneously. Moreover, we proposed revised IPSec tunnel configuration to reduce the IPSec tunnel overheads at a MN when the MN communicates with several MNs in the foreign networks at the same time. The VPN server, a security management entity in the home network, notifies an additional IPSec tunnel establishment between the x-HAs where the communication peers are registered. The simulation result showed that the proposed scheme decreases the end-to-end packet delay time and improves the throughput after the handoff compared to the existing mechanism.