• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.868-871
• /
• 2002

Nowadays, zerotrees based digital watermarking techniques are considered to be an efficient watermarking technique used for multimedia data in a compressed form. This paper presents a technique for watermarking an image, by employing zerotrees derived from the wavelet packet coefficients of the transformed image to carry the watermark signal. By setting a proper threshold in zerotrees determining process, the watermark signal can be recovered without the need of original image. With our proposed technique, more amount of watermark signal can be embedded within the image, compared to ordinary wavelet transform based techniques. The experimental results show the improved performance in both qualities of the resultant watermarked image and robustness of the embedded watermark signal against common signal processing such as brightness/contrast enhancement, high-pass filtering, Gaussian noise adding and JPEG compression scheme

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1428-1430
• /
• 2002

Polyaniline/polystyrene conducting blends were prepared and measured with the mechanical properties such as tensile strength and elongation and the electrcal properties such as surface resistance, electrical conductivity and dielectric loss tangent. The percolation threshold concentration of blends was 5phr of polyaniline and the morphology of blends was setting colser to that of polyaniline at higher concentration. The dielectric loss increased up to $10^5$ at the 50 % of polyaniline and was much influenced by frequency than temperature at higher concentration of polyaniline.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5B
• /
• pp.582-591
• /
• 2001

터보 부호는 반복적인 복호 알고리즘을 사용함으로써 가산성 백색 가우시안 잡음(AWGN) 채널 환경에서 Shannon 한계에 가까운 성능을 보이는 오류정정 방식으로 제안되었으나, 반복 연산량에 따른 복호 지연과 인터리버에 따른 지연에 의해 실시간 처리의 어려움이라는 문제점을 안고 있다. 본 논문에서는 터보 부호의 성능을 저하시키지 않는 범위에서 적절한 초기 임계값 설정에 따라 불필요한 반복 복호 횟수를 줄일 수 있는 터보 복호기 구조를 제안한다. 적절한 초기 임계값 설정은 LLR(Log-Likelihood Ratio)값의 평균값과 분산, 복호기의 출력에 대한 BER에 근거하여 여러 번의 모의 실험을 통해서 최적의 값으로 결정된다. 제안한 방식은 초기 임계값을 적절히 선택하면 손실이 없는 범위 내에서 반복횟수를 감소시킴으로써 기존의 정해진 반복횟수로 인한 큰 복호 지연을 미연에 방지하고, 이에 따른 계산량 감소는 저전력의 효과도 가져온다. 성능 평가를 위해 BER = $10^{-6}$이내이고, 전송속도가 32kbps 이상인 IMT2000의 고속 데이터 전송 환경에서 모의 실험을 하였다. 실험 결과로 기존의 정해진 반복횟수를 갖는 터보 복호기에 비해 SNR 변동(0~3dB)에서 평균적으로 55~90% 정도의 감소된 반복횟수를 검증하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1081-1087
• /
• 2015

This article aims to provide a design method of warning thresholds for active safety systems based on the performance-based approach considering driver behaviors. Both positive and negative consequences of warnings are considered, and the main idea is to choose a warning threshold where the positive consequence is maximized, whereas the negative consequence is minimized. The process of the performance-based approach involves: Defining the operating scenarios; setting the trajectory models, including human characteristics; estimating the alert and nominal trajectories; estimating the performance metrics; generating a performance-metric plot; and determining the alert thresholds. This paper chose a lane-departure warning system as an example to show the usefulness of the performance-based approach. Both human and sensor characteristics were considered in the system design, and this paper provided a quantitative method to include human factors in designing active safety systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.1018-1025
• /
• 1997

In this paper, we propose the interworking and emulation methods for the interoperability of ABR/ABT capability and algo propose the BCR Re-negotition with State-Dependent (BRSD) mechanism based on the common buffer with two thresholds and the EBCN method when public network hs the ABT capability. As BRSD mechansism has one common buffer for all ABR connectiona and BCR re-negotiation request according to the threshold, it can reduce the queue length and the frequency of ABT BCR re-negotiation. Using EBCN method, BRSD mechanism can prevent the continuous increasing of queue length in the emulation method with the CI bit setting of the ABR performance of the BRSD mechanism in the view poits of the masimum queue length, bandwidth utilization and ABT-BCR re-negotialtion frequency trough the simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.1
• /
• pp.29-36
• /
• 2020

In this study, a variable step algorithm is proposed on the basis of the perturb and observe method. The proposed algorithm can follow the maximum power point (MPP) quickly when solar irradiance changes rapidly. The proposed technique uses the voltage change characteristic at the MPP when the environment changes because of insolation or temperature. The MPP is tracked through the voltage control using a variable step method. This method determines the sudden change of solar irradiance by setting the threshold value and operates in fast tracking mode to track the MPP rapidly. When the operation point reaches the MPP, the mode switches to the variable step mode to minimize the steady state error. In addition, the output disturbance is decreased through the optimization of the control method design. The performance of the proposed MPPT algorithm is verified through simulation and experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.12
• /
• pp.1366-1371
• /
• 2011

In ultra precision machining, it is necessary to adjust the horizontality and reference position of a workpiece in a noncontact manner. For this, a simple process by measuring impedance between a tool tip and a workpiece which are connected to impedance analyzer is proposed. As the distance between the tool and the workpiece gets closer, the reduction rate of impedance becomes higher over all frequency ranges. By setting threshold value of impedance reduction rate at specific frequencies through preliminary experiments, the distance between the tool and the workpiece can be predicted and it directly enables us to horizontalize the workpiece and to set the tool to the desired reference position.

• Spatial Information Research
• /
• v.19 no.5
• /
• pp.1-11
• /
• 2011

This study mainly focused on the method of accurately extracting damage information in the im agery change detection process using the constructed high resolution aerial im agery. Bongwha-gun in Gyungsangbuk-do which had been severely damaged from a localized torrential downpour at the end of July, 2008 was selected as study area. This study utilized aerial im agery having photographing scale of 30cm gray image of pre-disaster and 40cm color image of post-disaster. In order to correct errors from the differences of the image resolution of pre-/post-disaster and time series, the prelim inary phase of image processing techniques such as normalizing, contrast enhancement and equalizing were applied to reduce errors. The extent of the damage was calculated using one to one comparison of the intensity of each pixel of pre-/post-disaster im aged. In this step, threshold values which facilitate to extract the extent that damage investigator wants were applied by setting difference values of the intensity of pixel of pre-/post-disaster. The accuracy of optimal image processing and the result of threshold values were verified using the error matrix. The results of the study enabled the early exaction of the extents of the damages using the aerial imagery with identical characteristics. It was also possible to apply to various damage items for imagery change detection in case of utilizing multi-band im agery. Furthermore, more quantitative estimation of the dam ages would be possible with the use of numerous GIS layers such as land cover and cadastral maps.

• 한국사회정책
• /
• v.23 no.1
• /
• pp.25-59
• /
• 2016

This paper analyses the policy effect of minimum housing standards, using the fact that Seoul set the minimum housing standards in 1998. Because the whole country except Seoul did not set the minimum housing standards in 1998, we could find this situation as a quasi-experiment. In order to identify the policy effect of minimum housing standards, I compare decreasing amounts in the number of households below the threshold between Seoul and comparison regions from 1995 to 2000, using Differences-in-Differences method. I draw estimate of one-to-one comparison, using Gyeonggi province as a comparison region, and OLS estimate, utilizing the whole nation except Seoul as a comparison region, respectively, and compare two estimates. The former and the latter suggest that the setting of Seoul minimum housing standard in 1998 account for decreasing the number of households under the minimum housing standard, by about 216,638 and 325,149, respectively. The latter is statistically significant at the 0.001 level and the former is in the 95% confidence level of the latter. Therefore we could conclude that the setting of minimum housing standards contributes significantly to achieve the policy objectives, a decrease in the number of households, which are below the threshold.