• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.523-528
• /
• 2020

A lateral type MEMS inertial switch was designed on the same principle as spring-mass system. The MEMS switch is used for arming mechanism of the arm-fire device by sensing the applied acceleration. We analyzed the switching capability of the MEMS switch under various acceleration conditions via performance model. Simulation results showed that the MEMS switch works very well at 10 g when the applied acceleration slope does not exceed 10 g/msec. On the other hand, the threshold operating acceleration level simulation exceeded the requirement (10±2 g) due to the width and length of the spring by considering 10% tolerance of the design values. Design modification of doubling the width of the spring, which is difficult to reduce less than 10% tolerance in fabrication process, was proposed after confirming the simulation results comply the requirement.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.49-55
• /
• 2017

The prevalence of obesity has noticeably increased worldwide over several decades with various complication. Even though anti-obesity drug treatments have been spotlighted by resulting in effective mean weight losses, its adverse effects cannot be overlooked. Thus, this study aimed to evaluate the effects of multi-frequency whole body vibration, one of the mechanical stimulus, as a countermeasure against obesity. Thirty-two-6-week-old C57BL/6J male mice were equally assigned to four groups: the Control group (CON, n = 8), the Sham group (Sham, n = 8), the sham with single frequency whole body vibration (S+V, n = 8), and the sham with multi frequency whole body vibration (S+MV, n = 8). After 4 weeks, morphologic changes in the adipose tissue were evaluated from three-dimensional images using in vivo micro-computed tomography. At 4 weeks, the volume of the abdominal adipose tissue, which had the highest value in Sham group, noticeably reduced in S+MV group compared to it in S+V group. These results implied that the accumulation of abdominal adipose tissue can be effectively reduced through applying multi-frequency whole body vibration.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.6
• /
• pp.2317-2322
• /
• 2015

Background: Despite the increasing number of screening examinations performed for cervical cancer utilizing the Papanicolaou smear test (Pap test), few studies have examined whether this strategy is cost-effective in Korea. Objective: This study was conducted to evaluate the cost-effectiveness of cervical cancer screening strategies incorporating the Pap test based on age at the start and end of screening as well as screening interval. Materials and Methods: We designed four alternative screening strategies based on patient age when screening was started (20 or 30 years) and discontinued (lifetime, 79 years). Each strategy was assessed at screening intervals of 1, 2, 3, or 5 years. A Markov model was developed to determine the cost-effectiveness of the 16 possible cervical cancer screening strategies, and this was evaluated from a societal perspective. The main outcome measures were average lifetime cost, incremental quality-adjusted life-years (QALYs), and incremental cost-effectiveness ratio (ICER). Results: Compared with various strategies comprising younger starting age, discontinuation age, and longer screening intervals, strategies employing annual screening for cervical cancer starting at a target age of 30 years and above were the most cost-effective, with an ICER of 21,012.98 dollars per QALY gained (with a Korean threshold of 30,000,000 KRW or US$27,272). Conclusions: We found that annual screening for cervical cancer beginning at a target age of 30 years and above is most cost-effective screening strategy. Considering the potential economic advantages, more intense screening policies for cervical cancer might be favorable among countries with high rates of cervical cancer and relatively low screening costs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2721-2728
• /
• 2012

Background: There are limited data evaluating the cost-effectiveness of gastric cancer screening using endoscopy or upper gastrointestinal x-ray in the general population. Objective: To evaluate the cost-effectiveness of population-based screening for gastric cancer in South Korea by decision analysis. Methods: A time-dependent Markov model for gastric cancer was constructed for healthy adults 30 years of age and older, and a deterministic sensitivity analysis was performed. Cost-utility analysis with multiple strategies was conducted to compare the costs and effects of 13 different screening alternatives with respect to the following eligibility criteria: age at the beginning of screening, screening interval, and screening method. The main outcome measurement was the incremental cost-effectiveness ratio. Results: The results revealed that annual endoscopic screening from ages 50-80 was the most cost-effective for the male population. In the females, biennial endoscopy screening from ages 50-80 was calculated as the most cost-effective strategy among the 12 screening alternatives. The most cost-effective screening strategy may be adjustable according to the screening costs and the distribution of cancer stage at screening. The limitation was that effectiveness data were obtained from published sources. Conclusions: Using the threshold of $19,162 per quality-adjusted life year on the basis of the Korean gross domestic product (2008), as suggested by the World Health Organization, endoscopic gastric cancer screening starting at the age of 50 years was highly cost-effective in the Korean population. The national recommendation for gastric cancer screening should consider the starting age of screening, the screening interval, and the screening modality.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1034-1041
• /
• 2011

Generally, In distributed online game server system, game maps are processed separately by means of dividing into several unit blocks. But the keeping normal distribution of user in game map is very difficult because preferences of game users are not same according to individual user's private character. For this reason, if the huge number of users concentrate on particular region of same game map at once, the game server exceed their threshold so that the system can be getting down. Conversely, the efficiency of system goes down considerably because the game server must perform map processing continuously even under user_empty situation. To solve this problem, in this paper, we propose a Map management method to control relatively normal distribution of users in game maps using Map Balance Server. In suggested model, we can reduce the load of game servers by means of turn off the game map processing temporary when a server is under user_empty situation. we also can maximize server performance by means of redistribution of map processing load among servers.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.146-153
• /
• 2008

Due to the extremely short pulse in the Ultra-Wideband (UWB) technology, the accurate synchronization acquisition method is very important for both high data-rate WPAN and low data-rate WPAN. In this paper, we propose the synchronization acquisition algorithm based on two-step signal search method to acquire the synchronization in the UWB multi-path channel. At the first step, the search window is divided by two and the window that has higher power is chosen as a next search window. This operation is repeated until the measure power of the search window is smaller than the threshold value. At the second step, we employ Linear Search algorithm to the search window obtained at the first step for fine search. The proposed algorithm is proved that the synchronization acquisition is faster than the parallel search algorithm and it shows good performance in environment of the SNR extreme changes by the simulation.

• Computers and Concrete
• /
• v.10 no.2
• /
• pp.135-147
• /
• 2012

At mesoscale, concrete is considered as a three-phase composite material consisting of the aggregate particles, the cement matrix and the interfacial transition zone (ITZ). The reconstruction of the internal structures for concrete composites requires the identification of the boundary of the aggregate particles and the cement matrix using digital imaging technology followed by post-processing through MATLAB. A parameter study covers the subsection transformation, median filter, and open and close operation of the digital image sample to obtain the optimal parameter for performing the image processing technology. The subsection transformation is performed using a grey histogram of the digital image samples with a threshold value of [120, 210] followed by median filtering with a $16{\times}16$ square module based on the dimensions of the aggregate particles and their internal impurity. We then select a "disk" tectonic structure with a specific radius, which performs open and close operations on the images. The edges of the aggregate particles (similar to the original digital images) are obtained using the canny edge detection method. The finite element model at mesoscale can be established using the proposed image processing technology. The location of the crack determined through the numerical method is identical to the experimental result, and the load-displacement curve determined through the numerical method is in close agreement with the experimental results. Comparisons of the numerical and experimental results show that the proposed image processing technology is highly effective in reconstructing the internal structures of concrete composites.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.667-674
• /
• 2007

Facial expressions provide significant clues about one's emotional state; however, it always has been a great challenge for machine to recognize facial expressions effectively and reliably. In this paper, we report a method of feature-based adaptive motion energy analysis for recognizing facial expression. Our method optimizes the information gain heuristics of ID3 tree and introduces new approaches on (1) facial feature representation, (2) facial feature extraction, and (3) facial feature classification. We use minimal reasonable facial features, suggested by the information gain heuristics of ID3 tree, to represent the geometric face model. For the feature extraction, our method proceeds as follows. Features are first detected and then carefully "selected." Feature "selection" is finding the features with high variability for differentiating features with high variability from the ones with low variability, to effectively estimate the feature's motion pattern. For each facial feature, motion analysis is performed adaptively. That is, each facial feature's motion pattern (from the neutral face to the expressed face) is estimated based on its variability. After the feature extraction is done, the facial expression is classified using the ID3 tree (which is built from the 1728 possible facial expressions) and the test images from the JAFFE database. The proposed method excels and overcomes the problems aroused by previous methods. First of all, it is simple but effective. Our method effectively and reliably estimates the expressive facial features by differentiating features with high variability from the ones with low variability. Second, it is fast by avoiding complicated or time-consuming computations. Rather, it exploits few selected expressive features' motion energy values (acquired from intensity-based threshold). Lastly, our method gives reliable recognition rates with overall recognition rate of 77%. The effectiveness of the proposed method will be demonstrated from the experimental results.

• Journal of Information Technology Applications and Management
• /
• v.15 no.3
• /
• pp.79-90
• /
• 2008

With the corporate environment nowadays being surrounded by plenty of information, the sharing of information among businesses through mutual cooperation tops the list of hot issues. Predictions of demands from the customer, business, or consumer by sharing information can affect the inventory and order production system. However, notwithstanding the importance of sharing information, empirical studies on quantitative use of information still remain insufficient in spite of many a discussion now being made on the sharing of information. This paper proposes to examine the ways meteorological information may affect the rises in the achievements of supply chains in distributive businesses, the kind of information that noticeably affects the consumer behavioral patterns in the distributive businesses but rarely perceived as a form of information shared by businesses. This study is based on a model in which meteorological information has been added as the one used to predict demands, after the beer distribution game has been modified to fit the current status, and simulations under an assumptive situation, where decisions are made on a daily basis, were conducted 50 times for a period of 1000 days for the generalization of the results, while at the same time a Duncan Test was conducted to determine the threshold to use the meteorological information that will be most profitable to the retailer, wholesaler, supplier and the supply chain as a whole. Our findings indicate that corporations have thresholds that vary from business to business depending upon the ratio of backlog costs to inventory costs. At the same time, our findings also show that there existed effective thresholds depending upon the ratio of backlog costs to inventory costs for the performance of the overall supply chain.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.5
• /
• pp.379-387
• /
• 2001

We proposed an enhanced extraction method of vehicle plate, in which both the brightness variation of gray and the Hue value of HSI color model were used. For the extraction of the vehicle plate from a vehicle image, first of all, candidate regions for the vehicle plate were extracted from the image by using the property of brightness variation of the image. A real place region was determined among candidate regions by the density of pixels with the Hue value of green and white. For- extracting the feature area containing characters from the extracted vehicle plate, we used the histogram-based approach of individual characters. And we proposed and applied for the recognition of characters the enhanced ART2 algorithm which support the dynamical establishment of the vigilance threshold with the genera]iced union operator of Yager. In addition, we propose an enhanced SOSL algorithm which is integrated both enhanced ART2 and supervised learning methods. The performance evaluation was performed using 100's real vehicle images and the evaluation results demonstrated that the extraction rates of tole proposed extraction method were improved, compared with that of previous methods based un brightness variation, RGB and HSI individually . Furthermore, the recognition rates of the proposed algorithms were improved much more than that of the conventional ART2 and BP algorithms.