• Biomolecules & Therapeutics
• /
• 제30권6호
• /
• pp.562-569
• /
• 2022

Etretinate, an acitretin metabolite, has a long retention duration in adipose tissues with a teratogenic potential. FDA advises a contraceptive period of at least three years after discontinuing acitretin. However, the effect of accumulated etretinate in adipose tissues on fetus is unknown. Although the teratogenic threshold for serum concentration of etretinate has been presented as higher than 2 ng/mL, that of acitretin is unknown. To examine factors affecting body retention of acitretin and etretinate, effects of acitretin dosage, acitretin-taking duration, elapsed time after stopping acitretin, age, sex, concomitant alcohol consumption, and foods and supplements rich in vitamin A intake on serum concentrations of acitretin and etretinate were analyzed in 14 acitretin-taken patients and 58 controls without taking acitretin or etretinate. Serum concentrations of acitretin, but not etretinate, tended to be inversely related to the discontinuation duration. They were also related to old age. Different from a published result that alcohol consumption could promote the metabolism of acitretin into etretinate, alcohol intake did not affect serum concentrations of etretinate. Unexpectedly, more frequent intake of vitamin A or provitamin A-rich food and supplements was associated with higher serum acitretin, whereas less frequent intake of vitamin A or provitamin A-rich food and supplements was associated with higher serum levels of etretinate in acitretin-taken patients. Despite preliminary data, inter-individual variations in serum retention of etretinate suggest the necessity of further research before applying the same guidelines to everyone to minimize unnecessary contraception.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.170-170
• /
• 2023

Providing safe and readily available water is vital to maintain public health. One of the most prevalent methods to prevent the spread of waterborne diseases is applying chlorine injection to the treated water before distribution. During the water transmission and distribution, the chlorine will experience a reduction, which can imply potential risks for human health if it falls below the minimum threshold. The ability to determine the appropriate initial intensity of chlorine at the source would be significant to prevent such problems. This study proposes two methods that integrate hydraulic and water quality modeling to determine the suitable intensity of chlorine to be injected into the source water to maintain the minimum chlorine concentration (e.g., 0.2 mg/l) at each demand node. The water quality modeling employs the first-order decay to estimate the rate of chlorine reduction in the water. The first method utilizes a backtracking algorithm to trace the path of water from the demand node to the source during each time step, which helps to accurately determine the travel time through each pipe and node and facilitate the computation of time-dependent chlorine decay in the water delivery process. However, as a backtracking algorithm is computationally intensive, this study also explores an alternative approach using a water age. This approach estimates the elapsed time of water delivery from the source to the demand node and calculate the time-dependent reduction of chlorine in the water. Finally, this study compares the outcomes of two approaches and determines the suitable and effective method for calculating the chlorine intensity at the source to maintain the minimum chlorine level at demand nodes.

• 한국수산과학회지
• /
• 제56권4호
• /
• pp.438-448
• /
• 2023

The concentrations of trace metals and organic matters in marine sediments collected from southeast Korean coastal areas were investigated. The primary purpose of this study was to evaluate the contamination status, spatial distribution and potential ecological risks associated with the physiochemical composition in the studied areas. We found that the concentrations of trace metals in marine sediments were as follows: Fe > Mn > Zn > Cr > Pb > Cu > As > Cd > Hg. According to the sediment quality guidelines (SQGs) of Korea, concentrations of Zn, Cr, Cu and Cd at all sampling sites were below threshold effect levels (TEL). However, concentrations of As, Hg, and Pb (i.e., at the 94-98% of sampling sites), were below the TEL. In addition, concentration factors (CF) in the surveyed area were found to be associated with low ecological risks, whereas As, Hg, and Cu showed moderate to high risk levels in some inner parts of the studied bays. Finally, the pollution load index (PLI) and ecological risk index (ERI) of the elucidated metals were linked to moderate ecological risk, pointing to the possibility of being deleterious to some benthic organisms.

• 센서학회지
• /
• 제33권2호
• /
• pp.112-116
• /
• 2024

Gas-sensor technology for volatile organic compounds (VOC) biomarker detection offers significant advantages for noninvasive diagnostics, including rapid response time and low operational costs, exhibiting promising potential for disease diagnosis. Colorimetric gas sensors, which enable intuitive analysis of gas concentrations through changes in color, present additional benefits for the development of personal diagnostic kits. However, the traditional method of visually monitoring these sensors can limit quantitative analysis and consistency in detection threshold evaluation, potentially affecting diagnostic accuracy. To address this, we developed a machine vision platform based on metal-organic framework (MOF) for colorimetric gas sensor arrays, designed to accurately detect disease-related VOC biomarkers. This platform integrates a CMOS camera module, gas chamber, and colorimetric MOF sensor jig to quantitatively assess color changes. A specialized machine vision algorithm accurately identifies the color-change Region of Interest (ROI) from the captured images and monitors the color trends. Performance evaluation was conducted through experiments using a platform with four types of low-concentration standard gases. A limit-of-detection (LoD) at 100 ppb level was observed. This approach significantly enhances the potential for non-invasive and accurate disease diagnosis by detecting low-concentration VOC biomarkers and offers a novel diagnostic tool.

• 한국산업보건학회지
• /
• 제34권2호
• /
• pp.115-124
• /
• 2024

Objectives: The aim of this study is to assess indoor air quality within and around buildings and evaluate the health risks associated with exposure to indoor air pollution. The study compares IAQ standards established by the World Health Organization with those set by South Korea's Ministry of Environment and Ministry of Education. Methods: The study utilized an Anderson Sampler and DustTrak^TM II to collect samples of total airborne bacteria and PM in indoor and outdoor environments. Collected samples were analyzed using biological and biochemical methods. Statistical analysis was conducted using SPSS to examine the correlation between airborne bacteria and PM. Results: The study revealed that the concentration of total airborne bacteria in indoor air generally remained below the Ministry of Environment's standard of 800 CFU/m³, although it surpassed this threshold in certain instances. PM concentrations did not exceed the standards. Indoor fine dust concentration was higher when there were people (P<0.05). There was no difference in total floating bacterial concentrations between indoor and outdoor environments (P=0.184). Finally, there was a correlation between fine dust and airborne bacteria concentrations. Conclusion: The study evaluated the concentrations of total airborne bacteria and PM in indoor air, emphasizing the importance of managing IAQ. Further research in various environments is essential to ensure a healthy indoor environment. The findings underscore the need for ongoing research and management to enhance IAQ and create safer and healthier living environments.

• Korean Journal of Radiology
• /
• 제2권1호
• /
• pp.28-36
• /
• 2001

Objective: To provide a systematic overview of the effects of various parameters on contrast enhancement within the same population, an animal experiment as well as a computer-aided simulation study was performed. Materials and Methods: In an animal experiment, single-level dynamic CT through the liver was performed at 5-second intervals just after the injection of contrast medium for 3 minutes. Combinations of three different amounts (1, 2, 3 mL/kg), concentrations (150, 200, 300 mgI/mL), and injection rates (0.5, 1, 2 mL/sec) were used. The CT number of the aorta (A), portal vein (P) and liver (L) was measured in each image, and time-attenuation curves for A, P and L were thus obtained. The degree of maximum enhancement (Imax) and time to reach peak enhancement (Tmax) of A, P and L were determined, and times to equilibrium (Teq) were analyzed. In the computed-aided simulation model, a program based on the amount, flow, and diffusion coefficient of body fluid in various compartments of the human body was designed. The input variables were the concentrations, volumes and injection rates of the contrast media used. The program generated the time-attenuation curves of A, P and L, as well as liver-to-hepatocellular carcinoma (HCC) contrast curves. On each curve, we calculated and plotted the optimal temporal window (time period above the lower threshold, which in this experiment was 10 Hounsfield units), the total area under the curve above the lower threshold, and the area within the optimal range. Results: A. Animal Experiment: At a given concentration and injection rate, an increased volume of contrast medium led to increases in Imax A, P and L. In addition, Tmax A, P, L and Teq were prolonged in parallel with increases in injection time The time-attenuation curve shifted upward and to the right. For a given volume and injection rate, an increased concentration of contrast medium increased the degree of aortic, portal and hepatic enhancement, though Tmax A, P and L remained the same. The time-attenuation curve shifted upward. For a given volume and concentration of contrast medium, changes in the injection rate had a prominent effect on aortic enhancement, and that of the portal vein and hepatic parenchyma also showed some increase, though the effect was less prominent. A increased in the rate of contrast injection led to shifting of the time enhancement curve to the left and upward. B. Computer Simulation: At a faster injection rate, there was minimal change in the degree of hepatic attenuation, though the duration of the optimal temporal window decreased. The area between 10 and 30 HU was greatest when contrast media was delivered at a rate of 2 3 mL/sec. Although the total area under the curve increased in proportion to the injection rate, most of this increase was above the upper threshould and thus the temporal window was narrow and the optimal area decreased. Conclusion: Increases in volume, concentration and injection rate all resulted in improved arterial enhancement. If cost was disregarded, increasing the injection volume was the most reliable way of obtaining good quality enhancement. The optimal way of delivering a given amount of contrast medium can be calculated using a computer-based mathematical model.

• 한국산업보건학회지
• /
• 제11권2호
• /
• pp.145-152
• /
• 2001

This study was performed to evaluate the coke oven emissions (COE) and polynuclear aromatic hydrocarbon levels in coke manu-facturing industry, secondary lead smelting industry and glass bottle manufacturing industry. 1. There were no significant difference between the means of personal samples and area samples by the types of industry(p>0.05). The levels of airborne total particulates of the secondary lead smelting industry was the highest($2.30mg/m^3$), and those of the coke manu-facturing industry and glass bottle manu facturing industry were $1.95mg/m^3$ and $1.37mg/m^3$. The concentration of COE was the highest in the glass bottle manufacturing industry($0.79mg/m^3$), and in order of $0.19mg/m^3$ in the coke manufacturing industry and $0.06mg/m^3$ in the secondary lead smelting industry. COE/total particulates(%) was highest in the glass bottle manufacturing industry(58.1%) and in order of 10.3% in the coke manufacturing industry and 3.1% in secondary lead smelting industry. There were significant differences in the total particle concentration and COE by the types of industry(p<0.05). 2. The levels of airborne total particulates was the highest at the smelting process of secondary lead smelting industry($2.30{\pm}0.72mg/m^3$), and the lowest at the smelting process of glass bottle manufacturing industry ($0.99{\pm}1.22mg/m^3$) Concentration of COE was the highest at the casting process of glass bottle manufacturing industry ($1.09{\pm}1.15mg/m^3$), the lowest at the smelting process of secondary lead smelting industry ($0.06{\pm}0.03mg/m^3$). The COE/total particulates(%) was the highest at the casting process of glass bottle manufacturing industry($65.9{\pm}20.5%$), and the lowest at the smelting process of secondary lead smelting indusry($3.1{\pm}2.7%$). 3. There were positive correlations between level of The airborne total particulates and concentration of COE in coke manufacturing industry and glass bottle manufacturing industry (p<0.05), but negative correlation in secondary lead smelting industry. 4. The numbers of case and rates that over the Threshold Limit Values(TLVs) were 24 (77.4%)cases in glass bottle manufacture, 14(23.7%) cases in the coke manufacturing industry and no one case in secondary lead smelting industry. Total numbers of case and rates that over TLVs were 38( 35.5%) cases. 5. The limit of detection(LOD) for PAH was $10{\mu}g/ml$ in standard sample. All PAH levels of the cokes manufacturing industry and the secondary lead smelting industry and the glass bottle manufacturing industry were trace or not to detect.

• 해양환경안전학회지
• /
• 제15권2호
• /
• pp.157-164
• /
• 2009

Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn등의 금속은 해수 중에 미량으로 존재하기 때문에 미량금속이라고 하며 일부는 미량영양소로서 생명체의 생리활동에 필요하지만 정해진 한계값을 초과할 때는 독성을 나타낸다. 미량금속(중금속)은 해양환경 및 해양생태계에 악영향을 미칠 수 있기 때문에 지속성 오염물질로 분류되어 다양한 연구가 수행되고 있다. 해수와 담수 등 자연수 중의 미량금속 측정은 정확도와 정밀도에 있어서 큰 오차를 가지고 있음이 장기간 인식되어 왔다. 미국과 유럽에서는 1975년 이후 미량금속의 해수 중 농도가 과거에 인지된 농도의 $1/10{\sim}1/1,000$ 정도로 낮아졌으며, 수직 분포는 생물, 물리, 지화학적인 과정들이 반영되고 있음이 밝혀졌다. 이와 같은 결과는 대부분 미량금속에 대한 분석방법과 기기의 발전에 기인하며, 시료 채취, 보관 및 분석 과정에 발생할 수 있는 오염을 제거해야 하는 세심한 주의가 요구되고 있다. 그러나 국내의 경우 많은 해양환경 관린 조사 및 연구에서 정확성이 결여된 자료가 보고되고 있다. 특히 미량금속 분석에 있어서 시료의 채취, 보관, 분석에 대한 정착한 인식 및 이해 부족은 자료의 질을 저하시키고 있다. 해양환경 연구 및 환경평가에 활용하기 위하여 자연수 중 미량금속의 정확한 자료를 획득하는 주요 과정에 대하여 소개하고자 한다.

• 한국환경보건학회지
• /
• 제8권1호
• /
• pp.67-80
• /
• 1982

In order to evaluate the psychosomatic health status of metal manufacturing industries workers and their working environments, the present study was conducted from March 1, 1981 to the end of September 1981. The data was obtained from the samples of metal manufacturing industries in Kyung-In Area and their 1, 162 employees. In addition, the 803 urban residents including students, office clerks, and general publics were sampled as control groups to compare with factory employees in psychosomatic analysis. The basic tool employed in the present study was the Todai Health Index (THI) which modified CMI and was developed by Tokyo University Research Team of Japan. The results of the present study were summarized as follows: 1. Working environments of the factories 1) The data shows that fabrication shop produced the highest noise level ranging from 91 to 96 dB (A) and iron and steel shop had the lowest noise level ranging from 81 to 86 dB (A). 2) Dust concentration was the highest in iron foundry shop ($3.8 mg/m^3$) and the lowest in fabrication shop ($1.2 mg/m^3$). 3) WBGT above threshold limit values (T.L.V.) was noted in steel shop (38$\circ$C) and iron foundry shop (34$\circ$C) 4) The concentration of Sulfur dioxide ($SO_2$)was 30.5ppm at steel shop and 12.0ppm at iron foundry shop. 5) The concentration of carbon monoxide (CO) was 140.0ppm at steel shop and 110.5ppm at iron foundry shop. 6) The atmospheric lead concentration was $0.49 mg/m^3$ at soldering shop. 2. The responses of psychosomatic complaints were much higher in steel shops group than in other manu-facturing group, except the response of aggressiveness. 3. The responses of psychosomatic complaints were much higher in industrial workers than in urban residents, except the responses of depression and aggressiveness (p < 0.01 ). 4. The psychosomatic symptoms which industrial workers and urban residents complained frequently were nervousness. agressiveness and lie scale in order. 5. The responses of psychosomatic complaints by sex were much higher in female group than in male group, except the response of aggressiveness. 6. The responses of psychosomatic complaints by age were that both the female and male group showed an increasing tendency in the all items, except the response of depression as age was increasing. 7. The responses of psychosomatic complaints by the length of services were that both the female and male group showed a tendency of increasing in physical symptoms as work years increased. 8. The responses of psychosomatic complaints were higher in unmarried group in the score of nervousness, aggressiveness, mental irritability and irregular life.

• 대한환경공학회지
• /
• 제37권1호
• /
• pp.7-13
• /
• 2015

본 연구에서는 맛 냄새 물질 발생시 표준정수처리공정에서 지오스민과 활성탄 주입량을 효과적으로 저감하는 방안을 제시하였다. 염소처리방식에 따른 지오스민 제거효율을 평가한 결과, 저농도(< 25 ng/L)의 경우 전염소와 중간염소를 동시에 운영할 경우 지오스민 제거율은 46%인 반면, 중간염소로 운영한 공정의 지오스민 제거율은 57%로 나타났다. 중농도(25~79 ng/L)에서는 전염소와 중간염소로 운영한 지오스민 제거율은 59%, 중간염소로 운영한 지오스민 제거율은 87%로 나타났다. 고농도(> 80 ng/L)에서도 전염소와 중간염소를 동시에 운영한 지오스민 제거율은 67%인 반면 중간염소로 운영한 지오스민 제거율은 95%로 나타나 중간염소로 운영시 제거율이 높아지는 것으로 나타났다. 지오스민 농도별 측정결과와 활성탄 투입량의 상관성을 분석한 결과, 결정계수($R^2$)는 0.96 으로 나타나 적합한 분말활성탄 조견표를 제안하였다. 또한, 지오스민 물질발생 초기에 중간염소와 활성탄을 동시에 투입 시 원수농도가 급격히 증가하여도 지오스민의 입자성 물질을 지속적으로 제거할 수 있어 활성탄 저감 뿐만 아니라 정수 기대농도도 만족할 수 있었다.