• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.384-408
• /
• 1994

The purpose of this study was to evaluate the fracture resistance of tooth restored with gold inlay. A profound understanding of the isthmus width factor, which is one of the several parameters of cavity designs, would facilitate the appropriate cavity preparation in a specific clinical situation. In this study, the cavities for gold inlay were prepared in maxillary left first premolar. A three-dimensional model was designed using I-DEAS program. The model was composed of 2515- nodes and 2172 isoparametric brick elements. In the model isthmus width was varied into 1/4, 1/3 and 1/2 of intercuspal width respectively, and numeric values of the material properties of enamel, dentin and gold was set. Three types of load : concentrated load, divided load and distributed load was 500N. The empty cavities in the model were also examined using divided load and distributed load. The three - dimensional Finite Element Method was used to analysis the displacement and stress distribution. The results were as follows : 1. All of the experimental models which were filled with gold inlay revealed similar direction of displacement to that of the natural tooth model under the same load type. But in the models with empty cavities, as the isthmus width increased, the degree of displacement increased in the case of divided load type. 2. All experimental models which were filled with gold inlay showed stress concentration at load points, but in the models with empty cavities at divided load type, as isthmus width increased, stress was concentrated at the comer of the pulpal floor. 3. In the models with empty cavities at divided load type, tooth fracture was expected regardless of isthmus width, but all experimental models which were filled with gold inlay after cavity preparation were not susceptible to fracture. 4. In all experimental models which were filled with gold inlay after cavity preparation, displacement patterns were similar under both concentrated and divided load types. In the models with empty cavities, a divided load resulted in a bucco-lingual cuspal displacemenat in both sides, but a distributed load resulted in a lingual displacement of the tooth.

• 한국콘텐츠학회논문지
• /
• 제19권11호
• /
• pp.92-101
• /
• 2019

본 연구는 음식점에 직접 고용되지 않은 직원이 제공하는 음식배달대행서비스 행태에 관한 대학생들의 주관적인 의견과 인식의 구조를 유형별로 도출하기 위해 Q-방법을 사용하였다. 이를 위해 설문지를 작성하여 P샘플을 선정하고 분류작업을 거치는 Q-sort를 PC QUANL프로그램을 이용하여 Q요인 분석을 실시하였다. 분석 결과 총 3가지의 유형으로 분류되었다. 제 1유형(N= 7): 효율 추구형, 제 2유형(N= 19): 편익 추구형,〕제3유형〔(N= 6): 가성비 추구형으로 각 각의 유형별로 다른 특징에 기인하여 요인을 명명하였다. 각 유형별 특징은 제 1유형: 소비자와 외식업소 모두에게 효율적인 측면을 인식하는 유형, 제 2유형; 신속, 편리, 유익함의 편익을 제공받는 측면을 인식하는 유형, 제3유형; 인건비 절약에는 기여 하지만 소비자에게 부담가중의 초기 시장에서 가격과 품질 측면을 인식하는 유형으로 나타났다. 분류된 3가지 유형에 따른 음식배달대행서비스 사업의 문제점을 도출하여 발전 방향과 개선방안에 대하여 전략적 시사점을 제공하고자 한다.

• 농촌계획
• /
• 제15권4호
• /
• pp.75-87
• /
• 2009

This paper tries to explore the local uniqueness and evolutionary characteristics of the spatial structure of the rural dwelling houses of China's Korean Ethnic. For this purpose, the paper selected 51 typical samples in each district, analyzing their ancestral home, building age, size, construction method, family composition etc. Moreover, the paper classified the pattern of the samples and analyzed the characteristic and evolutionary process of each pattern. Conclusions based on the analysis of the ancestral homes are as follows: 1.The house pattern of these China's Korean ethnics who are originally from the Hamkyung province is mainly jeongji- access type (A-type). A-type is mainly distributed along the Tumen River and Yalu River, in the Sino-Russian borders and the inland areas of Heilongjiang province. With the migration of the China's Korean ethnics, in Sino-Russian borders and the inland areas of Heilongjiang province, A-type with the 'badang' space, vestibule-access type (C-type) and living-centered type (D-type) appeared. 2. House patterns of Korean ethnics who are originally from the Pyongan province include three types: A-type, kitchen type (B-type) and C-type. A-type is mainly distributed along the Yalu River while B-type and C-type are mainly in the inland areas of these three Northeast provinces. With the decrease of population, the merger of rooms happened in A-type; while in the B-type and C-type, bathroom and storage came to exist in the north of the room. 3. The house pattern of Korean ethnics who are originally from the Gyeongsang province is mainly B-type, which is distributed in the inland areas of Heilongjiang and Jilin provinces. Besides, C-type and D-type also exist. They are in Jilin and Liaoning provinces. In the process of evolution, storage was set in the north part of the room or the window was cancelled in order to defend the coldness in Heilongjiang area, while in Jilin and Liaoning provinces, living room came into existence, which is gradually developing to D-type.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.242-250
• /
• 2017

Purpose: This study was conducted to determine the appropriate operating conditions through a factorial experiment for the secondary separating part of the self-propelled pepper harvester. Methods: An experimental setup that simulates the secondary separating part of the self-propelled pepper harvester was organized. Test samples were classified into three types according to the number of peppers on a stem, and 12 sets were prepared for each type. Among the operating conditions of the secondary separating part, the rotational speed of drum B (four levels), radial clearance between drums and cylindrical teeth (three levels), and speed ratio between the three drums (two levels) were set as the test factors, and tests were repeated three times for different levels of each factor. The appropriate operating conditions were determined by analyzing the separation ratio and damage ratio of the peppers collected through the secondary separating part. Results: The test factors changed the overall separation ratio and overall damage ratio in similar trends. In other words, the conditions that caused high overall separation ratios also exhibited high overall damage ratios. Owing to the high overall damage ratio in the condition with the highest overall separation ratio, the operating conditions should be selected considering both ratios. Conclusions: When the condition with more than 60% of overall separation ratio and less than 15% of overall damage ratio was considered as the appropriate operating condition, 70 rpm of the rotational speed of drum B, 5 mm of the radial clearance between drums and cylindrical teeth, and 7:3:5 for the speed ratio of the three drums A, B, and C should be applied for the secondary separating part used in this study. Supplementary studies will be required in the future to find optimal operating conditions through the actual field test under further divided test factors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1015-1019
• /
• 2001

This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current-fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

• Advances in concrete construction
• /
• 제6권1호
• /
• pp.15-28
• /
• 2018

In the present investigation, influence of various material parameters on the cavitation erosion resistance of concrete was investigated on the basis of laboratory experiments. As there is no well-established laboratory test method for evaluating the cavitation resistance of concrete, a test set up called 'cavitation jet' was specially established in the present study in order to simulate the cavitation phenomenon experienced in the hydraulic structures. Various mixtures of concrete were designed by varying the grade of concrete, type and quantity of pozzolana, type of aggregates and cement type to develop good cavitation resistant concrete constructed using marginal aggregates. Three types of aggregates having three different Los Angeles abrasion values (less than 30%, between 30% and 50% and more than 50%) were employed in this study. To evaluate the cavitation resistance a total of 60 cylindrical specimens and 60 companion cubes were tested in the laboratory respectively. The results indicate that cavitation resistance of concrete degrades significantly as the L.A. abrasion value of aggregates goes beyond the 30% value. Incorporation of pozzolanic admixtures was seemed to be beneficial to enhance the cavitation resistance of concrete. Influence of other material parameters on the cavitation resistance of concrete was also noted and important observations have been made in the paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.55-59
• /
• 2002

This paper presents a novel three-phase current-fed Pulse Width Modulation converter with switched capacitor type resonant DC link commutation circuit operating PWM pattern strategy under a design consideration of low-pass filter, which can operate on the basis of the principle of zero current soft switching commutation. In the first place, the steady state operating principle of this converter with a new resonant DC link snubber circuit is described in connection with the equivalent operation circuit, together with the practical design procedure of the switched-capacitor type resonant DC link circuit is discussed from a theoretical viewpoint on the basis of a design example for high-power applications. The actively delayed time correction method to compensate distorted currents due to a relatively long resonant commutation time is newly implemented in the open loop control scheme so as to acquire the new optimum PWM pattern. Finally, the experiment of set-up in laboratory system of this converter is concretely demonstrated herein to confirm a zero current soft-switching commutation of this converter. The comparative evaluations between current -fed hard switching PWM and soft-switching PWM converters are carried out from a viewpoint of their PWM converter characteristics.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.1058-1069
• /
• 2013

This paper proposes and designs a new output filter called an LCFL filter for application to three phase three wire shunt active power filters (SAPF). This LCFL filter is derived from a traditional LCL filter by replacing its capacitor with a C-type filter, and then constructing an L-C-type Filter-L (LCFL) topology. The LCFL filter can provide better switching ripple attenuation capability than traditional passive damped LCL filters. The LC branch series resonant frequency of the LCFL filter is set at the switching frequency, which can bypass most of the switching harmonic current generated by a SAPF converter. As a result, the power losses in the damping resistor of the LCFL filter can be reduced when compared to traditional passive damped LCL filters. The principle and parameter design of the LCFL filter are presented in this paper, as well as a comparison to traditional passive damped LCL filters. Simulation and experimental results are presented to validate the theoretical analyses and effectiveness of the LCFL filter.

• 대한인간공학회지
• /
• 제28권1호
• /
• pp.21-27
• /
• 2009

The purpose of this research is to understand the physiological characteristics of muscular men between the ages of 20 and 34 years who are distinct from the general population due to their muscular development, and to categorize them according to upper body somatotypes. This research was conducted in order to provide basic data necessary for developing clothing products for muscular men. The research method and results were as follows: 1. The study carried out factor analysis with the body measuring value of 168 muscular men according to the body classification method of Sheldon and Heath-Carter. The study materialized muscular men's lower body types statistically by carrying out cluster analysis, regarding scores of each factor extracted from the factor analysis as an independent variable. The study also carried out discriminant analysis with the results of cluster analysis classified so that morphological characters of each type were remarkably distinguished. 2. As the results of factor analysis, the study set up number of factors as three. Factor 1 occupied 38.149% of the total variables as a size factor of the lower body. Factor 2 occupied 20.417% of the total variables as a height and length factor of the lower body. Factor 3 occupied 8.466% of the total variables as a length factor of the hip. 3. The study classified the lower body type into three types and the characteristics by each type were as follows. Type 1 was a group with the best developed muscle in the lower of the body, considering that a size of their lower bodies was the largest. Type 2 was well-balanced muscular males though a size of the lower body was smaller than other types. This type didn't have fatness of the abdomen and large hips. Type 3 was a body type that the length from the waist to the hip was long. 4. As the results of carrying out discriminant analysis to distinguish muscular men's lower body types, the discriminant accuracy was 86.3% over all in the lower bodies.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.21-24
• /
• 2005

In this study, new methods of PC panel connection using 'ㄷ'type steel connection is proposed for highly seismic zone. A study was carry out to investigate the connection behavior subjected to cyclic inelastic loading. Three planar type and two T type PC wall will be tested. The variables will be examined were the shear reinforcement existence of top and bottom walls. The specimens will be tested only reverse cyclic loading in accordance with a prescribed displacement history. To transfer the shear strength shear key set up between top and bottom wall. Failure mode, behavior, ductility and energy dissipation capacity of the specimens constructed by new connections wll be compared with those of monolithic walls and Han's(Han, Jun Hee, Seoul National University) model.