• 한국가시화정보학회지
• /
• 제21권1호
• /
• pp.94-102
• /
• 2023

Three design parameters were considered in this study: outlet nozzle angle (30°, 60°, 80°), neck length (1 mm, 3 mm), and flow rate (0.5, 0.6, 0.7, 0.8 lpm). A neck diameter of 0.5 mm induced cavitation flow at a venture nozzle. A secondary transparent chamber was connected after ejection to increase bubble duration and shape visibility. The bubble size was estimated using a Gaussian kernel function to identify bubbles in the acquired images. Data on bubble size were used to obtain Sauter's mean diameter and probability density function to obtain specific bubble state conditions. The degree of bubble generation according to the bubble size was compared for each design variable. The bubble diameter increased as the flow rate increased. The frequency of bubble generation was highest around 20 ㎛. With the same neck length, the smaller the CV number, the larger the average bubble diameter. It is possible to increase the generation frequency of smaller bubbles by the cavitation method by changing the magnification angle and length of the neck. However, if the flow rate is too large, the average bubble diameter tends to increase, so an appropriate flow rate should be selected.

• 한국환경과학회지
• /
• 제30권5호
• /
• pp.399-406
• /
• 2021

The dissolution of ionized gas in dielectric barrier plasma, similar to the principle of ozone generation, is a major performance-affecting factor. In this study, the plasma gas dissolving performance of a gas mixing-circulation plasma process was evaluated using an experimental design methodology. The plasma reaction is a function of four parameters [electric current (X₁), gas flow rate (X₂), liquid flow rate (X₃) and reaction time (X₄)] modeled by the Box-Behnken design. RNO (N, N-Dimethyl-4-nitrosoaniline), an indictor of OH radical formation, was evaluated using a quadratic response surface model. The model prediction equation derived for RNO degradation was shown as a second-order polynomial. By pooling the terms with poor explanatory power as error terms and performing ANOVA, results showed high significance, with an adjusted R² value of 0.9386; this indicate that the model adequately satisfies the polynomial fit. For the RNO degradation, the measured value and the predicted values by the model equation agreed relatively well. The optimum current, gas flow rate, liquid flow rate and reaction time were obtained for the highest desirability for RNO degradation at 0.21 A, 2.65 L/min, 0.75 L/min and 6.5 min, respectively.

• 한국음향학회지
• /
• 제41권6호
• /
• pp.698-704
• /
• 2022

본 논문에서는 노즐 내부 유동의 소음원으로부터 발생되어 방사되는 공력 소음을 정량적으로 분석하였으며, 이를 외부 방사소음 결과와 비교하였다. 세가지 종류의 노즐 형상에 대해 내부 및 외부 유동을 정확히 예측하기 위해 고해상도 수치해석 기법인 비정상 압축성 대와류모사(Large Eddy Simulation, LES) 기법을 사용하였다. 와류소음원(Vortex Sound Source)을 통해 유동소음원을 확인하였으며, 이를 통해 노즐 내부 형상에서 주요 유동소음원의 분포를 확인하였다. 노즐 내부 유동의 와류소음원 레벨과 외부 방사 소음의 예측결과 및 측정결과와 비교하였으며, 이를 통해 정량적 분석을 검증하였다.