• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.131-137
• /
• 2018

The two recent excavations at the site of Beopsusa Temple in Seongju revealed that it contained eight building remains, three pedestrian facilities, four drainage facilities, two walls, three embankments, and an estimated pagoda remain. Even though this investigation was restricted to some sections of the site, it confirmed remains of architectural significance and thus attracted the attention of concerned researchers. This study thus set out to make an architectural survey of the site based on the excavation results and examine the characteristics and nature of remains of Buildings No.2 and 3 at the site. The planar analysis results show that Building No.2 (Remains 2-2) at the site of Beopsusa Temple was a gable-roofed building with a single story including 6 kan(間) in the front and 4 kan(間) in the flank and that Building No.3 (Remains 3-3) was a single-story building with a hipped-and-gable roof including 5 kan(間) in the front and 3 kan(間) in the flank. The most noteworthy remain of this excavation was the north-south square platform discovered at the Building No.2 at the site. It is estimated as a high chair platform used for Buddhist sermons. It was confirmed only at the lecture hall remains of Hwangnyongsa Temple and Anyangsa Temple in the nation and had never been found at remains related to Chinese and Japanese Buddhist Temples, being regarded as a very important and unique artifact. Since it was found at the remains of Building No.2, they was estimated as the lecture hall remain at the site. Found at the remains of Building No.3 at the site, the oblong altar remains were also very unique and rare and never found at other Buddhist temple sites. The inside of oblong altar was evenly covered with roof tiles instead of rubble, and there were small crushed stones for internal division, which is an altar construction method distinctly different from its counterparts at other Buddhist temple sites. Those findings raise the possibility high that a wooden facility was put up at the top of oblong remains.

• 건축역사연구
• /
• 제26권3호
• /
• pp.39-49
• /
• 2017

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

• 건축역사연구
• /
• 제26권4호
• /
• pp.35-44
• /
• 2017

The purpose of this study is to classify three-Kan hipped and gable-roofed Buddhist temples with the construction of their eave curve of part chunyeo and examine the characteristics and causes. The conclusions have been drawn as follows: First, there are largely three ways to secure symmetry in eave curve of part chunyeo. One is to obtain symmetry in eave curve of part chunyeo by making the size of eaves curves on well sides the same and forming symmetric curves in the front section along with the side roof and then forming the straight line in the central part (hereinafter referred to as the long straight line section method). The second is a method to enlarge eaves curves in the front and form eaves curves on the roof section to be symmetric (hereinafter referred to as the front is larger than side eaves curves method). The third is the method to make eaves curves in the roof section to be symmetric by adjusting the roof length and making difference between the front and side roof's length minimum (hereinafter referred to as the roof length-controlling method). Second, there are 16 cases applying two or more methods, and they are the mainstream. Third, there are 12 cases applying the front is larger than side eaves curve method and roof length-controlling method both, which seems to be the most universal. To sum up, they secured symmetry in roof edges considering the construction of seonjayeon and pyeongyeon according to the size of the structure, recognition on the directions of entrance into the area of the building, forms of planes, harmony with structures around, recognition on roof curves in accordance with the size, and also structural faults in the chunyeo part.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.340-352
• /
• 2018

조선시대 주불전은 발굴지와 현존하는 건물이 동시에 존재하여 서로 비교하여 발굴지를 복원하는 자료로서 활용하기에 적합하다. 특히 $3{\times}2$칸 주불전은 주불전의 기능을 하는 최소한의 규모로서 평면계획에서 비교항목의 수가 적어 유사성을 확인하고 복원을 위한 자료를 작성하는 기초연구의 대상으로 적합하다. 조선시대 건립된 $3{\times}2$칸 주불전지와 가장 유사한 평면계획을 가진 현존 불전을 찾는 방법을 제시하고 건축형식을 확인해보고자 하였다. 대상은 $3{\times}2$칸 주불전 발굴지 3개소와 29개의 현존하는 주불전이다. 평면계획에서의 비교항목은 절대적인 규모를 보여주는 면적, 정면길이/측면길이의 비율, 상대적인 규모를 보여주는 정면어칸길이/정면협칸길이의 비율, 정면어칸길이/측면칸길이의 비율로 하였다. 북지장사 대웅전 발굴지의 평면계획은 오어사 대웅전과 절대적인 규모와 상대적인 규모의 모든 면에서 유사성이 높았다. 안동 선찰사지 대웅전 발굴지는 고창 상원사 대웅전과는 면적, 정면길이/측면길이의 비율에서 유사하며 대적사 극락전과는 정면길이/측면길이의 비율, 정면어칸길이/정면협칸길이의 비율에서 유사성이 높았다. 숭선사지 대웅전 발굴지는 서동사 대웅전과 면적, 정면어칸길이/정면 협칸길이의 비율, 정면어칸길이/측면칸길이의 비율에서 유사성이 높았다. 결과적으로 절대적인 규모와 상대적인 규모를 구분하여 적용하여 비교항목간의 관련성을 확인하였고 다른 비교항목을 추가하여 확장할 수 있는 방법으로서 그 가치가 높다고 할 수 있다. 또한 현존 사례간의 유사성 비교를 통하여 발굴지에 원래 있었던 건물에 대한 추정을 구체적으로 할 수 있다는 장점을 확인하였다.