• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.143-152
• /
• 2012

It is well-known that image matching is necessary for automatic generation of 3D data such as digital surface data from aerial images. Recently developed aerial digital cameras allow to capture multi-strip images with higher overlaps and less occluded areas than conventional analogue cameras and that much of researches on multi-image matching have been performed, particularly effective methods of measuring a similarity among multi-images using point features as well as linear features. This research aims to investigate similarity measuring methods such as SSD and SNCC incorporated into a area based multi-image matching method based on vertical line locus. In doing this, different similarity measuring entities such as grey value, grey value gradient, and average of grey value and its gradient are implemented and analyzed. Further, both dynamic and pre-fixed adaptive-window size are tested and analyzed in their behaviors in measuring similarity among multi-images. The aerial images used in the experiments were taken by a DMC aerial frame camera in three strips. The over-lap and side-lap are about 80% and 60%, respectively. In the experiment, it was found that the SNCC as similarity measuring method, the average of grey value and its gradient as similarity measuring entity, and dynamic adaptive-window size can be best fit to measuring area-based similarity in area based multi-image matching method based on vertical line locus.

• Journal of Korean Society of Disaster and Security
• /
• v.7 no.1
• /
• pp.35-42
• /
• 2014

This research has been shown the Research Plan for R&D Long-term Load-map Design in the Facility Disaster on response of the changing Disaster Environment, Showing the Strategy for the extending investment method of the technical development and related on that the advanced nation's technical level gap is minimized in the same area, Designing for the business' high-level, long-term load-map and the core driving strategy of the safety technology development business in the facility disaster, RFP Documentation on the core driving Business and the detailed driving Issue. This research has been resulted the three lists, trend analysis and Vision of the Technology Research Development (R&D) of the Safety Technology Area in domestic and foreign, the Responding Technology Predict and the Extended Research Strategy of the Next Generation Safety Technology in the facility Disaster, long-mid Term Road-Map of the Safety Technology in the facility Disaster, finally the Action Issue's RFP of the Safety Technology in the facility Disaster.

• Journal of Energy Engineering
• /
• v.18 no.4
• /
• pp.230-238
• /
• 2009

We study about small gas engine and fuel cell CHP (Combined Heat and Power) as the technologies for energy conservation and $CO_2$ emissions reduction. Korea government plans to use them in near future. This study quantitatively analyzed energy consumption and $CO_2$ emissions reduction potential of small CHP instead of existing electric power plant (coal steam, combined cycle and oil steam) using LEAP (Long-range Energy Alternative Planning system) as energy-economic model. Three future scenarios are discussed. In every scenario similar condition for each CHP is used. Alternative scenario I: about 6.34% reduction in $CO_2$ emissions is observed in 2019 due to increase in amount of gas engine CHP and fuel cell CHP while coal use in thermoelectric power plant is almost stagnant. In alternative scenario II: a small 0.8% increase in $CO_2$ emission is observed in 2019 keeping conditions similar to alternative scenario I but using natural gas in combined cycle power plant instead of coal. During alternative scenario II overall $CO_2$ emission reduction is observed in 2019 due to added heat production from CHP. Alternative scenario III: about 0.8% reduction in $CO_2$ emissions is observed in 2019 using similar CHP as AS I and AS II. Here coal and oil are used in thermoelectric power plant but the quantity of oil and coal is almost constant for next decade.

• Journal of Engineering Education Research
• /
• v.22 no.6
• /
• pp.51-63
• /
• 2019

This study aims to present concept of "gong" which was shared by traditional East Asian societies (Korea, China and Japan) and to identify how it has been developed through their respective process of modernization and industrialization. Despite the territorial proximity of the three countries, their industrial and technological development followed different patterns, and the notion of engineering from the Occident was also accepted and reconstructed with a certain difference in each country. Japan had developed its own concept of engineering as part of industrialization in Western style and in the context of establishment of an imperialist nation. What was important for Japan was how engineering could contribute to the national development of technology and industry, and to the development of Imperial Japan. For China, which attached importance to resistance to Western civilizations and to strengthening the competitiveness for and which needed to resolve domestic political conflicts, engineering constituted more than a simple issue on technological and industrial dimension; it was also associated with obtaining ethical and political legitimacy which would allow the nation to gain support from the working and peasant classes. Though belated, Korean attempted to build an independent modern state, yet experienced a considerable nuisance from the invasion of Japan and the protracted colonial period. Engineering of Korea had to take a long time before emerging from backwardness especially because of Japanese policies which tended to restrict technological development and avoid fostering qualified engineers in the colony. Therefore, engineering in Korea started to contribute to the nation's development and the improvement of technological competitiveness only after it was combined with modern higher education after liberation, under the name of engineering science (工學, gong-hak). This study argues that our recognition of what engineering was for and who engineers were in East Asia will allow us to evaluate current status of engineering education and provide us with significant insight which will be useful when we imagine the future society. Identity of engineering in Korea, China, and Japan has been developed along with historical contexts such as clash of civilizations, wars, recovery of sovereignty and obtaining of national competitiveness; now, what will be combined with engineering in the next generation? This question will lead and motivate engineering students to think and imagine about what future engineering should be and how they respond to it.

• Journal of Pharmacopuncture
• /
• v.17 no.3
• /
• pp.31-39
• /
• 2014

Objectives: This study was performed to analyze the toxicity and to find the lethal dose of the test substance Water-soluble Carthami-flos pharmacopuncture (WCF) when used as a single intravenous-dose in 6-week-old, male and female Sprague-Dawley rats. Methods: The experiment was conducted at Biotoxtech according to Good Laboratory Practices. 20 female and 20 male Spague-Dawley rats were divided into 4 groups of 5 female and 5 male animals per group. The rats in the three experimental groups received single intravenous injections with 0.125-mL, 0.25-mL and 0.5-mL/animal doses of WCF, Groups 2, 3, and 4, respectively, and the control group, Group 1, received a single intravenous injection with a 0.5-mL dose of normal saline. Clinical signs were observed and body weight measurements were carried out for 14 days following the injections. At the end of the observation period, hematology, clinical chemistry, histopathological tests and necropsy were performed on the injected parts. Results: No deaths occurred in any of the groups. Also, no significant changes in body weight, hematological parameters or clinical chemistry test results between the control group and the experimental groups were observed. Visual inspection after necropsy showed no abnormalities. Histopathological tests on the injected parts showed no significant differences, except for Group 1 females; however, the result was spontaneous generation and had no toxicological meaning because it was not dose-dependent. Therefore, this study showed that WCF had no effect on the injected parts in terms of clinical signs, body weight, hematology, clinical chemistry, and necropsy. Conclusion: As a result of single intravenous-dose tests of the test substance WCF in 4 groups of rats, the lethal dose for both males and females exceeded 0.5 mL/animal. Therefore, WCF is a relatively safe pharmacopuncture that can be used for treatment, but further studies should be performed.

• Journal of the Korean Geographical Society
• /
• v.48 no.5
• /
• pp.709-727
• /
• 2013

Recently, "aging in place" has become the principle philosophy of elderly housing policy in many countries. However, since there is ambiguity surrounding the universal definition of it, the meaning of AIP has been defined by political expediency. This study aims to discuss the meaning of AIP by examining the transition of elderly housing issues and policy in Japan. During the last two decades, the Japanese government has tried to launch a new elderly welfare system to shift the responsibility of elderly care from the family to the society and from the society to the region. And the focus of elderly housing policy has shifted from the promotion of three-generation dwellings to supporting the development of private residences. However, since the main goal has been limiting the welfare budgets rather than enhancing the quality of life, elderly housing issues have been reduced to a matter of choosing either elderly care facilities frequently located in suburbs or not. This paper suggest that we should pursue the true AIP idea in housing policy, and argues that to do so we need to consider AIP from diverse aspects such as temporal continuity, the range of space, the dynamics of place experience and the capability of communities.

• Journal of Science and Technology Studies
• /
• v.5 no.2 s.10
• /
• pp.97-127
• /
• 2005

While science museums, whose functions consist traditionally in collecting, preserving, researching, and displaying science-related objects, present scientific knowledge, figures, or tools in the historical context, science centers give more emphases on science education by exposing interactive exhibits to their visitors. However, neither objects-oriented exhibits nor hands-on technologies can provide museum visitors with the full insight into modem science in terms of its complicated relationships to politics, economy, culture, art, risk, and environment. This paper argues that for the 21st century we need to establish a new kind of science museum through the critical examination of its previous kinds - science museums and science centers. In the first part of this paper, the history of the first and second generations of science museums, including their recent trends in science centers, in the West will be elaborated. Secondly, the development of national science museums in Korea will be discussed specifically for the understanding of Korean science museums. The next part of this paper will seek for the possibilities of the third generation of science museums through three examples, which show interdisciplinary, contextual, and institutional approaches to change science museums or science centers. Fourthly, the social function of science museums as 'forum' will be discussed in relation to promoting public 'participation' of science as well as public 'understanding' of science. As a conclusion, some practical suggestions and conceptual guidelines will be proposed for the future Korean national science museum.

• Physical Therapy Korea
• /
• v.15 no.1
• /
• pp.38-45
• /
• 2008

This study investigated gait characteristics, kinematics, and kinetics in the lower extremities between two different shoe conditions (high heeled shoes (7 cm), and high heeled shoes with a total contact insert (TCI)) after lower extremity muscle fatigue. Although TCI shave been applied in high heeled shoes to increase comfort and to decrease foot pressure, no study has attempted to identify the effects of TCI in fatigue conditions. The purpose of this study was to determine the effects of walking in high heeled shoes with TCI after lower extremity muscle fatigue was induced. This study was carried out in a motion analysis laboratory at Hanseo University. A volunteer sample of 14 healthy female subjects participated. All in fatigue conditions, the subjects were divided into two groups. The muscle fatigue was induced by 40 voluntary dorsi- and plantar-flexion exercises and 40 heel-rise exercises of the dominant foot. Surface electromyography was used to confirm the localized muscle fatigue using power spectral analysis of three muscles (tibialis anterior, gastrocnemius medialis and lateralis). The results were as follows: (1) In muscle fatigue conditions, the use of TCI decreased the peak flexion angle of the hip joint significantly in the early stance phase (p<.05) and increased the peak hip flexion moment in the terminal stance phase (p<.05). (2) In muscle fatigue conditions, the application of TCI also increased peak hip power generation in the early stance phase and peak hip power absorption in the terminal stance phase (p<.05). (3) In muscle fatigue conditions, the use of TCI reduced the impact force significantly and increased the secondary peak vertical GRF. These findings suggest that the TCI may provide beneficial effects when muscle fatigue occurs for a high heeled shoe gait. Future research employing the patient population and various types of TCI materials are required to clarify the effects of TCI.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.533-540
• /
• 2012

The use of wind energy is gaining importance because of its many advantages. Nations worldwide are promoting the installation of wind farms to produce electricity in an attempt to tackle climate change and increasing oil costs. But, wind turbines can generate undesired signals which disturb the performance of military radar systems. Because the current generation of on and off-shore three bladed wind turbines have radar signatures consistent with their very large physical size. So this study considers the options available for the reduction of wind turbine radar signature and presents solutions for each of the main external turbine components. The radar signature reduction approaches are based on existing technologies developed for aerospaces stealth applications. However, the realization of these for the purposes of reduction wind turbine radar signatures is a novel development, particularly in the solutions proposed. This paper is presented techniques which reduce radar signatures of wind turbine. We know that radar signatures of wind turbine reduce by using these techniques.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.253-262
• /
• 2006

In this paper, collision analysis is carried out between two FRP fishing boats. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the boat is constructed using 3-D CAD program. The formation of a finite element from a geometric data of the boats is carried out using HYPERMESH that is the commercial software for mesh generation and post processing. Twelve collision configurations are established by combining two kinds of contact angle($90^{\circ},\;135^{\circ}$) and three different speed(5, 10, 15knot) for small and large boats. Collision analysis is accomplished using DYNA3D. Stress distribution and deformation shape are investigated for each collision condition. In general, $90^{\circ}$ collision angle generate larger stress than $135^{\circ}$ case and the collision for two moving boats showed larger maximum stress than the case that one is moving and the other is stationary. When analysis is carried out until 150ms contact parts of two boats are broken for 10 and 15knot collision speed, in which maximum stress is larger than ultimate strength of the material.