• 한국재료학회지
• /
• 제26권11호
• /
• pp.611-622
• /
• 2016

Particle morphology change and different experimental condition analysis during composite fabrication process by traditional ball milling with discrete element method (DEM) simulation were investigated. A simulation of the three dimensional motion of balls in a traditional ball mill for research on the grinding mechanism was carried out by DEM simulation. We studied the motion of the balls, the ball behavior energy and velocity; the forces acting on the balls were calculated using traditional ball milling as simulated by DEM. The effect of the operational variables such as the rotational speed, ball material and size on the flow velocity, collision force and total impact energy were analyzed. The results showed that increased rotation speed with interaction impact energy between balls and balls, balls and pots and walls and balls. The rotation speed increases with an increase of the impact energy. Experiments were conducted to quantify the grinding performance under the same conditions. Furthermore, the results showed that ball motion affects the particle morphology, which changed from irregular type to plate type with increasing rotation speed. The evolution was also found to depend on the impact energy increase of the grinding media. These findings are useful to understand and optimize the particle motion and grinding behavior of traditional ball mills.

• 한국해안·해양공학회논문집
• /
• 제29권1호
• /
• pp.46-61
• /
• 2017

본 연구에서는 단파와 연안교량과의 상호작용해석에 수치해석적인 방법을 이용하며, 이 때 단파는 상 하류측의 수위차로부터 조파된다. 수치해석법에는 Navier-Stokes solver에 기초한 3차원혼상류해석법인 TWOPM-3D를 적용하며, 작용파력의 타당성은 본 수치해석결과와 기존의 실험결과와의 비교 분석으로부터 검증된다. 이로부터 교량의 종류, 단파강도, 수심 및 거더 수 등에 따른 수위변화와 유속변화를 포함하여 수평파력과 연직파력(연직상방파력과 연직하방파력)의 변동특성을 면밀히 검토하였으며, 흐름에 의해 유체 중에 연행되는 공기가 연직파력에 큰 영향을 미치는 것 등을 알 수 있었다.

• 자원환경지질
• /
• 제32권2호
• /
• pp.177-187
• /
• 1999

Gravity, magnetic and VLF surveys were conducted to investigat the structural stability and hazards associated with the Ubong landfill in Pohang City, which has been built to dump industrial wastes. In 1994, the collapse of a bank happened in the 6th landfill site due to sudden heavy rain, and a large quantity of waste materials flowed out to the nearby landfill sites, factories and roads. We used $10{\times}10m$ resolution DEM data for gravity reductions. The maximum variation of the terrain effect in the survey area is about 0.5 mgal and the terrain effect is large in the vicinity of bank boundary. The Bouguer gravity anomaly map shows the effect due to the variatino of thickness and type of waste materials. The small negative gravity anomaly increases from the 9th site to the 6th site. The small negative gravity anomaly of the 9th site reflects the relatively shallow dumping depth of average 14.5 m in this site and increased density of waste materials by the repeated stabilization process of soil overlaying. The 6th site is located at the center of the former valley and rainfall and groundwater are expected to flow from south-east to north-west. Therefore, considering the previous accident of mixing waste and bank materials at the north-west boundary of the landfill, there may be some environmental problems of leakage of contaminated water and bank stability. The complex inversion technique using Simulated annealing and Marquardt-Levenberg methods was applied to calculate three-dimensional density distribution from gravity data. In the case of 6th site, it is apparent that the landfill had been dumped in four sectors. However, most part of the 9th site and showed that high magnetic industrial wastes were concentrated in the 6th site. The result of magnetic survey showing low magnetic anomalies along the boundaries of two sites is similar to that of gravity data. The VLF data also reveals four divided sectors in the 6th site, and overall anomaly trend indicates the directio of former valley.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.71-80
• /
• 2012

To improve the $NO_X$ conversion over a SCR (selective catalytic reduction) catalyst, the DOC (diesel oxidation catalyst) is usually placed upstream of the SCR catalyst to enhance the fast SCR reaction ($4NH_3+2NO+2NO_2{\rightarrow}4N_2+6H_2O$) using equimolar amounts of NO and $NO_2$. Here, a ratio of $NO_2/NO_X$ above 50% should be avoided, because the reaction with $NO_2$ only ($4NH_3+4NO+O_2{\rightarrow}4N_2+6H_2O$) is slower than the standard SCR reaction ($4NH_3+4NO+O_2{\rightarrow}4N_2+6H_2O$). In order to accurately predict the performance characteristics of SCR catalysts, it is therefore desired to develop a more simple and reliable mathematical and kinetic models on the oxidation kinetics of nitric oxide over a DOC. In the present work, the prediction accuracy and limit of three different chemical reaction kinetics models are presented to describe the chemicophysical characteristics and conversion performance of DOCs. Steady-state experiments with DOCs mounted on a light-duty four-cylinder 2.0-L turbocharged diesel engine then are performed, using an engine-dynamometer system to calibrate the kinetic parameters such as activation energies and preexponential factors of heterogeneous reactions. The reaction kinetics for NO oxidation over Pt-based catalysts is determined in conjunction with a transient one-dimensional (1D) heterogeneous plug flow reactor (PFR) model with diesel exhaust gas temperatures in the range of 115~$525^{\circ}C$ and space velocities in the range of $(0.4{\sim}6.5){\times}10^5\;h^{-1}$.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.732-736
• /
• 2013

AlN epilayers were grown on a c-plane sapphire substrate using hydride vapor phase epitaxy (HVPE). A series of AlN epilayers were grown at $1120^{\circ}C$ with V/III ratios 1.5, 2.5 and 3.5, and the influence of V/III ratio on their properties was investigated. As the V/III ratio was increased, the surface roughness (RMS roughness), Raman shift of $E_2$ high peaks and full-width at half-maximum (FWHM) of symmetrical (002) & asymmetrical (102) of the AlN epilayers increased. However, the intensities of the Raman $E_2$ high peaks were reduced. This indicates that the crystal quality of the grown AlN epilayers was degraded by activation of the parasitic reaction as the V/III ratio was increased. Smooth surface, stress free and high crystal quality AlN epilayers were obtained at the V/III ratio of 1.5. The crystal quality of AlNepilayers is worsened by the promotion of three-dimensional (3D) growth mode when the flow of $NH_3$ is high.

• Advances in aircraft and spacecraft science
• /
• 제7권6호
• /
• pp.537-551
• /
• 2020

Investigation of leading edge impingement cooling for first stage rotor blades in an aero-engine turbine, its effect on rotor temperature and trailing edge wake loss have been undertaken in this study. The rotor is modeled with the nozzle for attaining a more accurate simulation. The rotor blade is hollowed in order for the coolant to move inside. Also, plenum with the 15 jet nozzles are placed in it. The plenum is fed by compressed fresh air at the rotor hub. Engine operational and real condition is exerted as boundary condition. Rotor is inspected in two states: in existence of cooling technique and non-cooling state. Three-dimensional compressible and steady solutions of RANS equations with SST K-ω turbulent model has been performed for this numerical simulation. The results show that leading edge is one of the most critical regions because of stagnation formation in those areas. Another high temperature region is rotor blade tip for existence of tip leakage in this area and jet impingement cooling can effectively cover these regions. The rotation impact of the jet velocity from hub to tip caused a tendency in coolant streamlines to move toward the rotor blade tip. In addition, by discharging used coolant air from the trailing edge and ejecting it to the turbines main flow by means of the slot in trailing edge, which could reduce the trailing edge wake loss and a total decrease in the blade cooling loss penalty.

• 한국해안해양공학회지
• /
• 제12권4호
• /
• pp.168-180
• /
• 2000

In the Part I, the three dimensional model testing with NNW deep water wave direction gave the results such that the occurrence of breaking waves over the peak of Ear-Do caused very small wave height at the structure position. But the measured wave forces were rather greater than the calculated forces based on deep water wave height. Furthermore, It was also perceived that the time series of the forces looked like corresponding to the case that waves were superimposed by an unidirectional current. In the present Part II, the current is presumed to be a flow secondly induced by breaking waves, and an extensive study to clarify the current in a quantitative sense is performed through numerical analysis and hydraulic experiment. The results showed that a strong circulation can surely occur in the vicinity of the structure due to radiation stress differentials given by the breaking waves. It was also recognized that the velocity of the induced current varied with the magnitude of energy dissipation rate introduced in the numerical analysis. The numerical analysis was tuned adjusting the dissipation rate so that the calculated wave field could closely match with the experimental results of Part I. The fluid force (in prototype) for the optimal match showed approximately 2.2% increased over the calculated value based on the deep water wave height (24.6m) whereas the force corresponding to the average of the experimental values showed the increase of about 13.0%.

• 한국항공우주학회지
• /
• 제32권9호
• /
• pp.27-34
• /
• 2004

측 추력(Lateral Jet) 제어 시스템에 의해 자세제어를 하는 미사일 주위의 초음속 유동장 해석을 위하여 삼차원 Navier-Stokes 코드 (AADL3D)를 개발하고, 이를 이용한 수치해석 연구를 수행하였다. 미사일의 받음각, 제트 노즐의 위치, 그리고 제트의 분출 각 등의 Parameter가 미사일에 미치는 수직력 및 피칭모멘트에 대한 영향을 알아보기 위한 사례 연구를 수행하였다. 또한 미사일은 무게 중심을 기준으로 4개 영역으로 나뉘어 각 부분에서의 수직력과 모멘트에 대한 기여도를 비교하였다. 공력해석 결과, 각 Parameter 변화에 대한 서로 다른 수직력과 모멘트 변화양상 및 그 원인을 확인할 수 있었다. 또한 각 Parameter 의 적절한 조합에 의해 모멘트 발생을 최소화 할 수 있음을 보여 주었다.

• 한국항공우주학회지
• /
• 제40권5호
• /
• pp.395-404
• /
• 2012

본 논문에서는 전산유체역학을 이용하여 3차원 비행체 형상에 대한 동안정 미계수를 예측하였다. 피치에 대한 미계수는 피치방향의 조화진동운동을 통하여 계산하였고 롤 감쇠계수는 비관성 좌표계에 대한 정상해석을 통하여 계산하였다. 계산은 Basic Finner와 SDM 형상에 대해 수행했으며 다른 연구자의 실험적/수치적 결과와 비교하였다. 유동 계산을 위해 비관성 좌표계와 관성 좌표계에서 모두 사용할 수 있는 3차원 Euler 해석자를 개발하였다. 시간 정확성을 유지한 비정상 해석을 위해 이중시간적분법을 적용하였다. 동안정 미계수계산 결과는 다른 수치 및 실험적 연구 결과들과 잘 일치하는 것을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제15권3호
• /
• pp.5-13
• /
• 2014

본 논문에서는 준설토를 활용한 경량혼합토(LWFS)의 연약지반개량 적용성에 대해 검토한 내용을 다루었다. 현재까지 제시된 경량혼합토의 공학적 특성에 관한 연구결과를 종합 분석하여 경량혼합토의 물성을 정리하였으며, 그 결과를 토대로 임의의 현장조건을 가정하여 경량혼합토공법과 SCP 공법 및 DCM 공법 적용 시에 대한 3차원 수치해석을 수행하였다. 연약지반개량공법 비교해석 결과, 경량혼합토 공법을 적용하는 경우 SCP 공법을 적용하는 수준 이상의 침하관리가 가능하며, 경량혼합토의 목표성능에 따라 침하발생 수준을 조절할 수 있는 것으로 검토되었다. 또한 DCM 공법과 비교 시 경량혼합토 재료의 경량성으로 과잉간극수압 발생량이 현저히 작아져 잔류침하를 최소화할 수 있는 것으로 검토되었다.