• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.6
• /
• pp.15-23
• /
• 2011

Stereo vision approach to solve the problem using a single camera three dimension precise distance measurement and object recognition method is proposed. Precise three dimensional information of objects can be obtained using single camera, a laser light and a rotating flat mirror. With a simple thresholding operation on the depth information, the segmentations of objects can be obtained. Comparing the signatures of object boundaries with database, objects can be recognized. Improving the simulation results for the object recognition by precise distance measurement are presented.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.105-115
• /
• 2006

Thickness is a commonly used parameter in product design and manufacture. Its intuitive definition as the smallest dimension of a cross-section or the minimum distance between two opposite surfaces is ambiguous for intricate solids, and there is very little reported work in automatic computation of thickness. We present three generic definitions of thickness: interior thickness of points inside an object, exterior thickness for points on the object surface, and radiographic thickness along a view direction. Methods for computing and displaying the respective thickness values are also presented. The internal thickness distribution is obtained by peeling or successive skin removal, eventually revealing the object skeleton (similar to medial axis transformation). Another method involves radiographic scanning along a viewing direction, with minimum, maximum and total thickness options, displayed on the surface of the object. The algorithms have been implemented using an efficient voxel based representation that can handle up to one billion voxels (1000 per axis), coupled with a near-real time display scheme that uses a look-up table based on voxel neighborhood configurations. Three different types of intricate objects: industrial (press cylinder casting), sculpture (Ganesha idol), and medical (pelvic bone) were used for successfully testing the algorithms. The results are found to be useful for early evaluation of manufacturability and other lifecycle considerations.

• Journal of Power System Engineering
• /
• v.19 no.4
• /
• pp.11-16
• /
• 2015

Welding is very popular method for joining two or more metals. In this paper, the three-way factorial design was adopted for obtaining the optimum friction stir welding conditions of Al 5052 alloy. Tools of shoulder diameter of 9, 12, 15 mm and pin length of 1.5 mm were used. Also the material's dimension for welding was $100{\times}100{\times}2mm$, and the tensile specimens were worked by water-jet technique. Welding variables were shoulder diameter, rotating speed of tool and welding speed. As far as this work is concerned, optimum condition for friction stir joint of Al 5052 alloy was predicted as the shoulder diameter of 15 mm, welding speed of 500mm/min and rotating speed of 1000 rpm. In addition, the presumed range of tensile strength under the optimal conditions is estimated to be $208.3{\pm}5.7$ MPa with 99% reliability.

• KCI Concrete Journal
• /
• v.12 no.2
• /
• pp.73-84
• /
• 2000

A new form of construction utilizing structural steel as the boundary elements in ductile flexural concrete walls is proposed to solve the bar congestion problems in such a heavily reinforced region, while maintaining the ductility and energy absorption capacity comparable to their traditional form. Two wall specimens containing rectangular hollow structural sections (HSS) and channels at their ends respectively, and one companion standard reinforced concrete wall specimen with concentrated end reinforcement were constructed and tested under reversed cyclic loading to evaluate the construction process as well as the structural performance. Initially, all three specimens were chosen and detailed with some caution to have approximately the same flexural capacity without change of the original shape and dimension of a rectangular cross section correction. Analysis and comparison of test results indicated that the reversed cyclic responses of three walls showed similar hysteretic properties, but in those with steel boundaries, local buckling of the corresponding steel webs and flanges following significant yielding was a dominant factor to determine the hysteretic response. The monotonic and cyclic responses predicted based on a sectional approach was also presented and found to be in good agreement with measured results. Design recommendations considering local instability of the structural steel elements and the interaction between steel chords and a concrete web member in such a composite wall are presented.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1885-1890
• /
• 2008

3-D heterogeneous nucleation was simulated by classical molecular dynamics (MD), where the Lennard-Jones (LJ) gas and solid cluster-seed molecules have argon and aluminum properties, respectively. There are three shapes of cluster-seeds, cube, rod, and sphere, and three classes of masses and the simulation took place under nine supersaturation ratios, making a total of 81 calculations. Results show that the dimension of the cluster-seed highly affects the rates of cluster development. In order to analyze heterogeneous nucleation above and below the critical supersaturation ratio, growth rate and liquefaction rate were separately defined to supplement the investigation. Design of experiments (DOE) was used for analysis which displayed that the shape and mass of the cluster-seed are prominent for the growth rate, while the supersaturation ratio is most significant followed by the mass for liquefaction rate. The significance of the supersaturation ratio for overall liquefaction suggests that thermal diffusion is more dominant than mass interactions for this system.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.548-551
• /
• 2005

In this paper, three axial accelerometer was used to develop a small sensor module, which was attached to human body to calculate the acceleration in gravity direction by human motion, when it was positioned in any direction. To measure its wearer's walking or running motion using the sensor module, the acquired sensor data was pre-processed to enable its quantitative analysis. The acquired digital data was transformed to orthogonal coordinate value in three dimension and calculated to be single scalar acceleration data in gravity direction and normalized to be physical unit value.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.139-145
• /
• 2000

The mechanism of the inner resistance in a rubber crawler system has been investigated to reduce the power requirement (Kitano et al. 1994). The rolling resistance of the track roller, which is one of the major inner resistances, was measured for seven different vertical loads. The rolling resistance changed periodically and could be classified into three types. In case of the vertical load less than 500N, the rolling resistance was almost constant. For the vertical load greater than 500N, the maximum value of the rolling resistance increased. Further more in case of the vertical load greater than 1200N, negative resistance appeared. Analytical simulation of the travel resistance based on experimental results and static equilibrium equations derived from three-dimension mechanical model for the rubber crawler system. It was found that the simulation method was carried out to evaluate the travel resistance occurred by the rolling resistance of the track roller. The rolling resistance for each track roller arrangement and effects of the lug phase in the right and left rubber crawler could be estimated quantitatively.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.7-14
• /
• 2006

Three-dimensional distribution and variation of moisture content of boxed-heart square timber of Pinus densiflora was investigated to find the safe and rapid drying methods. As results, microwave-drying method could dry the boxed-heart square timber with sectional dimension of $150{\times}150mm$ under 10% moisture content (MC) within 72 hours with less surface checks, compared with hot-air drying. In case of microwave drying, the MC distribution during drying had a close relation with the initial MC distribution. In case of hot air drying, however, it was independent on the intial one except for the intial drying stage.

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.30-44
• /
• 2016

In this study, we used the Q methodology, which is considered an effective way to identify and assess the characterization of the human subjective consciousness, and we intended to carry out a scientific approach to classify cosmetics consumers in a department store. The purpose of this study is to identify the dimension of recognition and the characterization of Korean women who use a department store, as well as to classify cosmetics consumers in a department store. The analyzed data was divided into the top 10 questions and 10 sub-items, and it was then classified into six consumer types, depending on typicality of three factors. The three factors were 'effectiveness', 'goal' and 'congestion of shopping'. We named and analyzed the features of each type through in-depth Q workshops in which 22 professionals participated. This study is meaningful as it used the Q-methodology instead of statistics which had been used before to classify the consumers, so that the 'subjective' estimation was analyzed into 'objective' types. The results of this study are expected to be useful for creating a marketing strategy for the cosmetics industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.8
• /
• pp.1365-1375
• /
• 1997

Jacket is the basic formal dress for working women, and one of the most frequently worn by them. It has, however, some problems caused by movement, depending on how well it fits. To improve fitness of jacket, this study compared and evaluated the state of fitness objectively by employing a numerical system in relation with clothing and body. We made three experimental jackets based on the previous jacket patterns and used Moire Photo-graphy to measure the amounts of space between clothes and body from the overlap cross section map. The results obtained from this study were summarized as follows; 1. According to the measurement result of the pattern by using the One-dimension measurement, the amount of ease in girth item for pattern B was larger than the other two patterns. The amounts of space of each part showed the difference of the positions of princess lines, and the different sizes of the darts. 2. From the result of Moire Photography, the wearing shapes of the experimental jackets were influenced by the characteristics of somatotype. In addition, we could analyze the differences of the patterns with Moire Photography. 3. The amounts of space for waist part was larger than those for other parts. Pattern B scored the largest amount of space for all parts compared with pattern A and C. 4. For only waist part, there existed a significant difference in the average amount of space for the three patterns.