• Journal of Korea Game Society
• /
• v.20 no.3
• /
• pp.25-34
• /
• 2020

This study is a VR system design designed to evaluate the impact of interaction on user experience analyzed by developer's perspective for the interactive VR fashion show. In the VR fashion show design, we produced an interactive system through the four interactive elements of camera viewpoint, cloth, effects, and sound. The interactive design system is proposed based on three application facto rs in VR space design: speed, range, and mapping. The study focused on the user experience based on format conversion to apply the Unity3D engine using 3D model, animation, 2D UI design, and simulation.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.179-183
• /
• 1996

Most of the conventional electrocardiogaphies fail to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography (HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as ventricual late potentials(LP). In this paper, we developed a HRECG using uncorrected XYZ lead. The overall gain of the amplifier is 4000 and the bandwidth is $0.5{\sim}300Hz$ without using 60Hz notch filter. Three 16-bit AH converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to PC via a DMA-controlled serial communication channel using RS-485 and HDLC protocol. The noise level of the developed HRECG is less than $5{\mu}V_{rms,\;RTI}$. In order to further reduce the noise level, signal averaging technique is implemented utilizing template matching method. The SNR of the developed HRECG is high enough for the detection of LP.

• Journal of Information Processing Systems
• /
• v.17 no.5
• /
• pp.947-959
• /
• 2021

Aiming at the problem of low accuracy in the water boundary automatic extraction of islands from GF-2 remote sensing image with high resolution in three bands, new water edges automatic extraction method in island based on GF-2 remote sensing images, genetic algorithm (GA) method, is proposed in this paper. Firstly, the GA-OTSU threshold segmentation algorithm based on the combination of GA and the maximal inter-class variance method (OTSU) was used to segment the island in GF-2 remote sensing image after pre-processing. Then, the morphological closed operation was used to fill in the holes in the segmented binary image, and the boundary was extracted by the Sobel edge detection operator to obtain the water edge. The experimental results showed that the proposed method was better than the contrast methods in both the segmentation performance and the accuracy of water boundary extraction in island from GF-2 remote sensing images.

• Journal of Astronomy and Space Sciences
• /
• v.38 no.1
• /
• pp.23-29
• /
• 2021

Utilizing a new version of the sunspot number and group sunspot number dataset available since 2015, we have statistically studied the relationship between solar activity parameters describing solar cycles and the slope of the linear relationship between the monthly sunspot numbers and the monthly number of active days in percentage (AD). As an effort of evaluating possibilities in use of the number of active days to predict solar activity, it is worthwhile to revisit and extend the analysis performed earlier. In calculating the Pearson's linear correlation coefficient r, the Spearman's rank-order correlation coefficient rs, and the Kendall's τ coefficient with the rejection probability, we have calculated the slope for a given solar cycle in three different ways, namely, by counting the spotless day that occurred during the ascending phase and the descending phase of the solar cycle separately, and during the period corresponding to solar minimum ± 2 years as well. We have found that the maximum solar sunspot number of a given solar cycle and the duration of the ascending phase are hardly correlated with the slope of a linear function of the monthly sunspot numbers and AD. On the other hand, the duration of a solar cycle is found to be marginally correlated with the slope with the rejection probabilities less than a couple of percent. We have also attempted to compare the relation of the monthly sunspot numbers with AD for the even and odd solar cycles. It is inconclusive, however, that the slopes of the linear relationship between the monthly group numbers and AD are subject to the even and odd solar cycles.

• Genomics & Informatics
• /
• v.20 no.1
• /
• pp.5.1-5.10
• /
• 2022

Non-syndromic hearing loss (NSHL) is a common hereditary disorder. Both clinical and genetic heterogeneity has created many obstacles to understanding the causes of NSHL. The present study has attempted to ravel the genetic aetiology in NSHL progression and to screen out potential target genes using computational approaches. The reported NSHL target genes (2009-2020) have been studied by analyzing different biochemical and signaling pathways, interpretation of their functional association network, and discovery of important regulatory interactions with three previously established miRNAs in the human inner ear as well as in NSHL such as miR-183, miR-182, and miR-96. This study has identified SMAD4 and SNAI2 as the most putative target genes of NSHL. But pathogenic and deleterious non-synonymous single nucleotide polymorphisms discovered within SMAD4 is anticipated to have an impact on NSHL progression. Additionally, the identified deleterious variants in the functional domains of SMAD4 added a supportive clue for further study. Thus, the identified deleterious variant i.e., rs377767367 (G491V) in SMAD4 needs further clinical validation. The present outcomes would provide insights into the genetics of NSHL progression.

• Korean Journal of Exercise Nutrition
• /
• v.24 no.1
• /
• pp.24-28
• /
• 2020

[Purpose] Recent studies have demonstrated a probable association between ACE I/D polymorphism and obesity. Thus, this study aimed to investigate whether ACE I/D polymorphism influenced the susceptibly of developing obesity in Korean adults. [Methods] A total of 353 healthy Korean adults aged between 30 and 82 years were recruited, including 157 males and 196 females. Among the participants, 103 (29.2 %) were classified as normal (BMI < 23 kg/m²), 117 (33.1 %) as overweight (23 kg/m² ≤ BMI < 25 kg/m²), and 133 (37.7 %) as obese (BMI ≥ 25 kg/m²). ACE polymorphism (rs1799752) analysis was performed using the MGB TaqMan® SNP Genotyping assay with 3 types of primers and 2 types of probes. The distributions of the ACE genotypes and allele frequencies were analyzed among the three groups using the Hardy-Weinberg equilibrium, chi-square tests, and multiple regression analysis. [Results] The distribution of the ACE genotypes were as follows: normal [II: n=38 (36.9 %), ID: n=46 (36.8 %), DD: n=19 (18.4 %)], overweight [II: n=43 (36.8 %), ID: n=55 (47.0 %), DD: n=19 (16.2 %)], and obese [II: n=41 (30.8 %), ID: n=76 (57.0 %), DD: n=16 (12.0 %)]. Unexpectedly, the I allele, rather than the D allele, was common in the obese group. [Conclusion] ACE I/D polymorphism is not associated with BMI in Korean adults. Thus, it is unlikely to be a powerful candidate gene for obesity in Korean adults.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.360-368
• /
• 2003

Statement of Problem: The residual monomer of denture base materials causes hypersensitivity on oral mucosa and intereferes with the mechanical properties of the cured resin. The amount of residual monomer is influenced by materials, curing cycle, processing method, and etc. Purpose: The aim of this study was to investigate the residual methyl methacrylate(MMA) content of injection molded denture base polymer, and to compare this with the self-cured resin and the conventional compression molded heat-cured resin. Materials and Methods: Disc shaped test specimens (50mm in diameter and 3mm thick) were prepared in a conventional flasking technique with gypsum molding. One autopolymerized denture base resins (Vertex Sc. Dentimex. Netherlands) and two heat-cured denture base resins (Vertex RS. Dentimex. Netherlands, Ivocap. Ivoclar Vivadent, USA) were used. The three types of specimens were processed according to the manufacturer's instruction. After polymerization, all specimens were stored in the dark at room temperature for 7 days. There were 10 specimens in each of the test groups. 3-mm twist drills were used to obtain the resin samples and 650mg of the drilled sample were collected for each estimation. Gas chromatography (Agillent 6890 Plus Gas Chromatograph, Agillent Co, USA) was used to determine the residual MMA content of 10 test specimens of each three types of polymer. Results: The residual monomer content of injection molded denture base resins was $1.057{\pm}0.141%$. The residual monomer content of injection molded denture base resins was higher than that of compression molded heat cured resin ($0.867{\pm}0.169%$). However, there was no statistical significant difference between two groups (p>0.01). The level of residual monomer in self cured resin($3.675{\pm}0.791$) was higher than those of injection molded and compression molded heat cured resins (p<0.01). Conclusion: With respect to ISO specification pass / fail test (2.2% mass fraction) of residual monomer, injection molding technique($1.057{\pm}0.141%$) is a clinically useful and safe technique in terms of residual monomer.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2009

STATEMENT OF PROBLEM. Poor wettability of denture relining materials may lead to retention problems and patient discomfort. PURPOSE. Purpose of this study is to compare and evaluate wettability of nine denture relining materials using contact angle measurements under air and water storage over time. MATERIAL AND METHODS. Nine denture relining materials were investigated in this study. Two heat-curing polymethyl-methacrylate(PMMA) denture base materials: Vertex RS, Lang, one self-curing polyethyl-methacrylate(PEMA) chairside reline resin: Rebase II, six silicone relining materials: Mucopren soft, Mucosoft, $Mollosil^{{R}}$ plus, Sofreliner Touch, GC $Reline^{TM}$ Ultrasoft, Silagum automix comfort were used in this experiment. Contact angles were measured using high-resolution drop shape analysis system(DSA 10-MK2, KRUESS, Germany) under three conditions(in air after setting, 1 hour water storage, and 24 hours water storage). Nine materials were classified into three groups according to material composition(Group 1: PMMA, Group 2: PEMA, Group 3: Silicone). Mean values of contact angles were compared using independent samples t-test and one-way ANOVA, followed by a Scheffe's post hoc analysis($\alpha$=0.01). RESULTS. Contact angles of materials tested after air and water storage increased in the following order: Group 1(PMMA), Group 2(PEMA), Group 3(Silicone). Heat-cured acrylic denture base resins had more wettability than silicone relining materials. Lang had the highest wettability after 24 hours of water storage. Silicone relining materials had lower wettability due to their hydrophobicity. Wettability of all denture relining materials, except Rebase II and $Mollosil^{{R}}$ plus, increased after 24 hours of water storage. CONCLUSIONS. Conventional heat-cured resin showed the highest wettability, therefore, it can be suggested that heat-cured acrylic resin is material of choice for denture relining materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4927-4935
• /
• 2012

Turmeric is a medicinal herb with various pharmacological activities. Curcumin, demethoxycurcumin(DMC) and bisdemethoxycurcumin(BDMC) were extracted from turmeric by dipping and ultrasonic wave method. And extraction efficiency was identified using solid phase extraction(SPE). The extracted sample were simultaneously separated and analyzed from three kinds of commercial $C_{18}$ reversed-phase high performance liquid chromatography using water and acetonitrile as mobile phase with isocratic elution mode. Flow rate 1.0mL/min, injection volume $10{\mu}L$ and column oven temperature $40^{\circ}C$ at 425nm wavelength has been conducted. From the experimental results, the optimum mobile phase composition of water/acetonitrile 50/50vol% using RS tech column. It is evident that the amount of curcuminoids extracted(extraction time 4h) by 100% MeOH was higher than any aqueous MeOH composition. Finally, in 100% water extraction, the amount(mAU${\times}$mim) of curcuminoids extracted by SPE was 14.3 and 24.5 times respectively higher than ultrasonic wave and dipping method. The shown results can be applied as sources for pharmaceuticals and functional material.

• Journal of Korea Water Resources Association
• /
• v.40 no.8
• /
• pp.617-628
• /
• 2007

The purpose of this paper is to prepare snowmelt parameters using RS and GIS and to assess the snowmelt impact in SLURP (Semi-distributed Land Use-based Runoff Process) model for Chungju-Dam watershed $(6,661.5km^2)$. Three sets of NOAA AVHRR images (1998-1999, 2000-2001, 2001-2002) were analyzed to prepare snow-related data of the model during winter period. Snow cover areas were extracted using 1, 3 and 4 channels, and the snow depth was spatially interpolated using snowfall data of ground meteorological stations. With the snowmelt parameters, DEM (Digital Elevation Model), land cover, NDVI (Normalized Difference Vegetation Index) and weather data, the model was calibrated for 3 years (1998, 2000, 2001), and verified for 1 year (1999) using the calibrated parameters. The average Nash-Sutcliffe efficiencies for 4 years (1998-2001) discharge comparison with and without snowmelt parameters were 0.76 and 0.73 for the full period, and 0.57 and 0.19 for the period of January to May. The results showed that the spatially prepared snow-related data reduced the calibration effort and enhanced the model results.