• 한국화재소방학회논문지
• /
• 제3권3호
• /
• pp.3-7
• /
• 1989

The aim of this study is to provide the basic data of spray setting method for the fireproof covering. For this purpose, the purpose, the behavior of different three kinds method which is the number of thimes, interval, finishing for a required performance. The result of the data analysis shows that it is better to spray setting method at a time and to finish by natural becomes to reduce a period and labor cost for works.

• 소음진동
• /
• 제7권4호
• /
• pp.597-604
• /
• 1997

Ground vibrations induced from railroad were measured to get the basic data that can be usde to prepare countermeasures for solving environmental vibration problems. Vibration levels were measured simultaneously at three points in double distances from railroad. These data were analuzed with the kinds of trains, media to understand the magnitudes and characteristics of distance attenuation of railroad vibrations.

• 대한물리의학회지
• /
• 제16권1호
• /
• pp.23-31
• /
• 2021

PURPOSE: This study was conducted to identify the effects of altering foot position on quadriceps femoris including vastus medialis obliques (VMO), vastus lateralis (VL) and rectus femoris (RF) activation during wall squat exercises. METHODS: All subjects (n = 15) were selected and randomly performed three kinds of wall squats: 1) GWS (General Wall Squat), 2) WSS1/4 (Wall Squat Short 1/4), and 3) WSS1/2 (Wall Squat Short 1/2). Each subject completed all three kinds of wall squatting exercises at three different times and recorded the muscle activity data of vastus medialis obliques, vastus lateralis and rectus femoris. RESULTS: Compared with GWS exercise, VMO and RF muscle activity significantly increased under WSS1/2 exercise (p < .05), while only RF muscle activity significantly increased under WSS1/4 exercise (p < .05). CONCLUSION: The results of the present study indicate that moving the foot toward the wall during wall squats has a positive effect on quadriceps activation. The exercise of wall squat short can not only be used as the lower limb muscle strengthening training for normal people, but also as the recovery training for patellofemoral pain syndrome patients in the rehabilitation stage. Besides, Anterior cruciate ligament patients can also try this exercise according to the advice of doctors and therapists.

• 응용통계연구
• /
• 제8권1호
• /
• pp.61-74
• /
• 1995

오늘날에는 컴퓨터를 이용한 다양한 그래프기법의 개발로 자료로부터 정보를 직접적으로 얻는 것이 용이하다. 특히 최근에 발표된 R-코드(Cook과 Weisberg, 1994)는 다양한 2차원, 3차원 플롯 뿐만 아니라 축의 회전과 여러가지 모형에 대한 적합성을 제시하므로 보다 쉽게 자료에 적합한 모형을 시각적으로 분석할 수 있게 하였다. 그러나 그래프는 3차원 이상의 공간을 표현할 수 없기 때문에 하나의 반응변수와 세개이상의 설명변수 사이의 관계를 직접적으로 표현하는 것이 불가능하다. 이와 관련하여 Li(1991, 1992)에 의하여 제시된 SIR, pHd 방법과 Cook과 Weisberg(1991)에 의하여 제시된 SAVE는 설명변수들의 선형결합을 이용하여 효과적으로 설명변수들의 차원을 줄이는 방법을 제시하였다. 본 연구에서는 Li에 의하여 제시된 pHd 방법을 반응변수가 2개이상인 다변량 반응변수 모형에 적용하는 방법을 연구하였다. pHd 방법의 적용에는 많은 계산과정이 요구되는데, 이러한 계산과 다양한 플롯은 R-코드를 이용하였다.

• 경영과정보연구
• /
• 제4권
• /
• pp.257-284
• /
• 2000

According as the drivers increase who have their cars, the comprehensive studies on the automobile for the traffic safety have been raised as the important problems. Visual Recognition System for radio-controled driving is a part of the sensor processor of Unmanned Autonomous Vehicle System. When a driver drives his car on an unknown highway or general road, it produces a model from the successively inputted road traffic information. The suggested Recognition System of the Road Traffic Safety Information Board is to recognize and distinguish automatically a Road Traffic Safety Information Board as one of road traffic information. The whole processes of Recognition System of the Road Traffic Safety Information Board suggested in this study are as follows. We took the photographs of Road Traffic Safety Information Board with a digital camera in order to get an image and normalize bitmap image file with a size of $200{\times}200$ byte with Photo Shop 5.0. The existing True Color is made up the color data of sixteen million kinds. We changed it with 256 Color, because it has large capacity, and spend much time on calculating. We have practiced works of 30 times with erosion and dilation algorithm to remove unnecessary images. We drawing out original image with the Region Splitting Technique as a kind of segmentation. We made three kinds of grouping(Attention Information Board, Prohibit Information Board, and Introduction Information Board) by RYB( Red, Yellow, Blue) color segmentation. We minimized the image size of board, direction, and the influence of rounding. We also minimized the Influence according to position. and the brightness of light and darkness with Eigen Vector and Eigen Value. The data sampling this feature value appeared after building the learning Code Book Database. The suggested Recognition System of the Road Traffic Safety Information Board firstly distinguished three kinds of groups in the database of learning Code Book, and suggested in order to recognize after comparing and judging the board want to recognize within the same group with Nearest Neighborhood Decision Making.

• 한국안전학회지
• /
• 제11권1호
• /
• pp.121-128
• /
• 1996

Estimating the cost of injuries and "accidents" to an organization is very important to figure out about how much well each organization has run his company and how much efficiently he has got the results using a certain amount of the expense for safety. Despite the potential usefulness to management of information as to the cost of a company's "accidents", it is not customary accounting practice to make these data available. Of the two general kinds of costs forced on a company by its occupational injuries and "accidents", the insurance cost and uninsured cost, -the former is by far the easier to find out. But actually, this uninsured cost should be figured out at each company. Authors have designed the generalized model to figure out the above problem costs to establish its efficient safety control. One construction company has been a pilot for this study. It is found that efficient safety control cost should be 1.2%~l.3% of total selling amount by analyzing actual data for three years.g actual data for three years.

• 음성과학
• /
• 제10권4호
• /
• pp.107-115
• /
• 2003

In this paper we tried to classify the pathological voice signal with severe noise component based on two different parameters, the spectral slope and the ratio of energies in the harmonic and noise components (HNR), The spectral slope is obtained by using a curve fitting method and the HNR is computed in cepstrum quefrency domain. Speech data from normal peoples and patients are collected, diagnosed and divided into three different classes (normal, relatively less noisy and severely noisy data), The mean values and the standard deviations of the spectral slope and the HNR are computed and compared with in the three kinds of data to characterize and classify the severely noisy pathological voice signals from others.

• 한국의류학회지
• /
• 제30권11호
• /
• pp.1598-1607
• /
• 2006

The purpose of this study was to analyze the proportion of gathered skirts using a three-dimensional measurement system. And in this experiment, we have attempted to accumulate three-dimensional data of wearing model and find out adequate methods for analyzing shape of clothes. The experimental design consists of two factorial designs. We established three different kinds of fabrics, ratio of gathers. The measurement tool for three-dimensional model was whole body 3D scanner(Exima-WBS2H). Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. As the results show, there were different effect of gather and proportion of shapes among the measurements of width, thickness and areas made by different lines of vision in cross-sectional silhouette. And there were difference shapes of section area at each part of gathered skirts between vertical-outline silhouette and vortical-plane silhouette made by gathering conditions. And also the cross-sectional silhouettes and vertical silhouettes were related to shape of clothes.

• 제어로봇시스템학회논문지
• /
• 제10권7호
• /
• pp.643-648
• /
• 2004

Most of shoes manufacturing processes are not yet automated, which puts restrictions on the increase of productivity. Among them, adhesive application processes particularly are holding the most workers and working hours. In addition, its working conditions are very poor due to the toxicity of adhesive agents. In case of automating adhesive application processes by using robots, the robot teaching by playback is difficult to produce high productivity because the kinds of shoes to be taught mount up to several thousands. Therefore, it is essential to generate the robot working paths automatically according to the kind, the size, and the right and left of shoes, and also to teach them to the robot automatically. This study deals with automated adhesive spraying to shoe outsoles and uppers by using a robot, and develops the program to generate three-dimensional robot working paths off-line based on CAD data. First, the three-dimensional data of an outsole outline or an upper profiling line are extracted from the two-dimensional CAD drawing file or the three-dimensional scanner. Next, based on the extracted data and the nozzle conditions for adhesive spraying, a robot working path is generated automatically. This research work is the core in automating adhesive spraying processes, and will do much for increasing productivity of shoes manufacturing.

• 생물환경조절학회지
• /
• 제1권1호
• /
• pp.52-60
• /
• 1992

The optimum management of nutrient solution needs the effective combination of fertilizers as well as the accurate control of nutrient solution. This study was attempt to make a supporting system for effective fertilizer combination by using computer and also to develop a EC predicting equation for keeping the EC of solution within the allowable range after application of combined fertilizers. The supporting system consists of three parts : (1) data bases, (2) rules for deciding the kinds and amounts of fertilizers and (3) main control. With input data, the main control automatically constructs the network connecting the related data bases and subsequently executes the operation of searching proper fertilizers through it. For more effective searching, fertilizers are classified into two levels(level 1 and level 2) in consideration of solubility, price, and frequency in use, and searched in that order. The EC prediction equation, a extended form of the Robinson and Stroke's theoretical equation only available for a binary electrolyte, is suggested for predicting the EC of the nutrient solution containing many kinds of inorganic compounds. The comparison of predicted and measured ECs showed good agreements with the high correlation between the predicted EC decrement by ion interaction and the actual one(limiting EC minus measured EC).