• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.41-46
• /
• 2001

최근에 선박이 대형화되는 추세에 힘입어 조선소는 광폭천흘수선, 초대형 원유운반선 및 초대형 컨테이너선 등을 건조하고 있다. 이와 같은 선박은 상대적으로 다른 선박에 비해 강성이 작기 때문에 파랑 중에서 유탄성 운동을 하게 되고, 입사하는 파고가 작은 경우에도 선체의 2절 모드의 진동에 의해 선체의 갑판이 피로 파괴되는 경우가 종종 발생하는 것으로 알려져 있다. 본 논문에서 전진하는 선박의 유체 압력을 계산하기 위해 적분방정식은 3차원 소오스 분포법을 사용하고, 그린함수는 전진하면서 동요하는 형태를 이용하였다. 방사문제는 선박을 여러 개의 단면으로 나누어 단면간의 간섭효과를 고려하여 heave 및 pitch 강제동요와 관련된 부가질량 및 조파 감쇠계수를 계산하였고, 파강제력은 각 단면에서 선행해에 의한 힘만 고려하였다. 선박의 각 단면의 수직운동은 선박에 대한 운동방정식을 이용하고 강성행렬은 오일러 보 이론에 의해 산정되었다. 계산은 Esso-Osaka 선박을 모델로 도입하여 입사하는 파도의 주파수가 변함에 따른 선박의 각 단면에 대한 운동, 굽힘 모우멘트를 계산하였다.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1479-1486
• /
• 2019

The purpose of the present study is to develop the 3D static and noise simulator based on Galerkin Finite Element Method (GFEM) using the unstructured hexahedral elements. The 3D, 2G neutron diffusion and noise equations are discretized using the unstructured hexahedral by considering the linear approximation of the shape function in each element. The validation of the static calculation is performed via comparison between calculated results and reported data for the VVER-1000 benchmark problem. A sensitivity analysis of the calculation to the element type (unstructured hexahedral or tetrahedron elements) is done. Finally, the neutron noise calculation is performed for the neutron noise source of type of variable strength using the Green function technique. It is shown that the error reduction in the static calculation is considerable when the unstructured tetrahedron elements are replaced with the hexahedral ones. Since the neutron flux distribution and neutron multiplication factor are appeared in the neutron noise equation, the more accurate calculation of these parameters leads to obtaining the neutron noise distribution with high accuracy. The investigation of the changes of the neutron noise distribution in axial direction of the reactor core shows that the 3D neutron noise analysis is required instead of 2D.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.841-848
• /
• 1997

Combustion of gaseous fuel combustor in a high temperature vitiated air stream was studied with computer simulation. It is for application to afterburner of gas turbine engine which the exact mechanism is not yet clarified. As the jet velocity from fuel nozzle is very high and the geometry of combustor is three dimensional complex structure, many time and money are required to have good results. To consider this demerit, it is simplified to 2-dimensional and modified with the nozzle hole area to same area of annual status. As the thickness of annual is too thin, it is to divide with the many grids for reasonable results. Accordingly, new method which injected fuel mass, momentum and energy are added to source terms of each governing conservation equation as a source terms is introduced like as two phase analysis. Reaction rate is determined by taking into account the Arrhenius reaction based on a single step reaction mechanism. It is focused to temperature and product concentration distribution at each equivalence ratio of inlet hot product.

• 한국해양공학회지
• /
• 제27권5호
• /
• pp.51-62
• /
• 2013

The water wave interactions on any three-dimensional structure of arbitrary geometry can be calculated numerically through the use of source distribution or Green's function techniques. However, such a method can be computationally expensive. In the present study, the water wave interactions in floating circular cylinder arrays were investigated numerically using the eigenfunction expansion method with the three- dimensional potential theory to reduce the computational expense. The wave excitation force, added mass coefficient, radiation damping coefficient, and wave run-up are presented with the water wave interactions in an array of 5 or 9 cylinders. The effects of the number of cylinders and the spacing between them are examined because the water wave interactions in floating circular cylinder arrays are significantly dependent upon these.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1845-1850
• /
• 2003

The underground utility tunnels are important facility as a mainstay of country because of communication developments. The communication and electrical duct banks as well as various utility lines for urban life are installed in the underground utility tunnel systems. If a fire breaks out in this life-line tunnel, the function of the city will be discontinued and the huge damages are occurred. In order to improve the safety of life-line tunnel systems and the fire detection, the behaviors of the fire-induced smoke flow and temperature distribution are investigated. In this study we assumed that the fire is occurred at the contact or connection points of cable. Numerical calculations are carried out using different velocity of ventilation in utility tunnel. The fire source is modeled as a volumetric heat source. Three-dimensional flow and thermal characteristics in the underground tunnel are solved by means of FVM (Finite Volume Method) using SIMPLE algorithm and standard ${\kappa}-{\varepsilon}$ model for Reynolds stress terms. The numerical results of the fire-induced flow characteristics in an underground utility tunnel with different velocity of ventilation are graphically prepared and discussed.

• 대한조선학회논문집
• /
• 제32권4호
• /
• pp.123-135
• /
• 1995

본 논문에서는 파중에서의 다수의 3차원 임의형상 자유부체에 작용하는 표류력 해석법을 제시한다. 3차원 특이점분포범, 파의 상호간섭이론 그리고 운동량 이론에 의한 Far field법을 결합하여 이론을 정식화하였으며, 수치계산 결과를 Kagemoto[10]에 의한 33(3행11열)개의 footing형 축대칭 부체에 작용하는 표류력의 실험치 및 계산치와 서로 비교 검토함으로서 본 방법의 타당성을 검정하였다. 최종적으로, 유한수심에서의 44(4행10열)개의 상자형 부체군에 대해 상호간섭을 고려한 결과와 고려하지 않은 결과를 서로 비교 검토함으로서 표류력에 대한 상호간섭의 영향을 평가하였다.

• 대한기계학회논문집
• /
• 제18권12호
• /
• pp.3287-3296
• /
• 1994

For the numerical computation of three-dimensional compressible flow field within a blade row in a centrifugal compressor, a quasi 3-dimensional solver which combines a reversible B-B flow and an irreversible H-S flow using finite element methods was developed. In a reversible B-B flow, the governing coordinates are modified in order to be applied to any type of turbomachinery, and two kinds of stream functions are introduced in order to make the Kutta condition exactly satisfied. In an irreversible H-S flow, the changes of entropy in the irreversible governing equations are determined not by empirical source but by the theoretical treatment of dissipation forces. The dissipation forces are obtained from the distribution of shear stresses in the flow passage which are given from the wall shear stresses using the exponential functions. A more accurate quasi-3-dimensional solver is established where the effect of body forces is involved in the non-axisymmetric H-S flow. Some numerical results obtained from authors' previous studies for axial flow machines assure that the present method is able to predict well as long as the flow is subsonic and not under strong viscous effect.

• 한국해양공학회지
• /
• 제20권5호
• /
• pp.36-41
• /
• 2006

The main object of this study is to develop an accurate and convenient method for the response analysis of offshore structures in real sea states. A numerical procedure is described for predicting the motion responses and tension variations of the ISSC TLP in multi-directional irregular waves. The developed numerical approach in the frequency domain is based on acombination of the three dimensional source distribution method, the dynamic response analysis method, and the spectral analysis method. Frequency domain analysis in the multi-directional irregular waves is expanded to a time domain analysis by using a convolution integral after obtaining the impulse response by Fourier transformation. The results of the comparison between responses in the frequency and time domain confirmed the validity of the proposed approach.

• 한국항해항만학회지
• /
• 제31권8호
• /
• pp.675-681
• /
• 2007

다방향 불규칙파 중에서의 인장계류식 해양구조물(TLP)의 구조응답 해석을 수행함으로써 다방향 불규칙파가 구조응답에 미치는 영향을 평가하고 있다. 인장계류식 해양구조물에 작용하는 파강제력과 동유체력은 3차원 특이점분포법을 사용하여 각각의 외각요소에 대해 평가하였다. 3차원 골조요소로 모델링하여 유한요소법에 의해 구조응답을 평가하였으며, 인장계류식 해앙구조물의 각 외각요소간의 유체역학적 상호간섭을 고려하여 구조응답을 해석하였다. 구조응답의 주파수 응답함수와 다방향파의 스펙트럼을 이용하여 다방향 불규칙파에 대한 해양구조물의 구조응답 스펙트럼을 구하여 다방향 불규칙파가 인장계류식 해양구조물의 구조응답에 미치는 영향을 평가하였다.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.763-775
• /
• 2021

The thermal hydraulic performances of Steam Generator (SG) under both steady and transient operation conditions are of great importance for the safety and economy in nuclear power plants. In this paper, based on our self-developed SG thermal hydraulic analysis code STAF (Steam-generator Thermalhydraulic Analysis code based on Fluent), an improved new version STAF-CT (fully Coupling and Transient) is developed and introduced. Compared with original STAF, the new version code STAF-CT has two main functional improvements including "Transient" and "Fully Three Dimensional Coupling" features. In STAF-CT, a three dimensional energy transferring module is established which can achieve energy exchange computing function at the corresponding position between two sides of SG. The STAF-CT is validated against the international benchmark experiment data and the results show great agreement. Then the U-shaped SG in AP1000 nuclear power plant is modeled and simulated using STAF-CT. The results show that three dimensional flow fields in the primary side make significant effect on the energy source distribution between two sides. The development of code STAF-CT in this paper can provide an effective method for further SG high fidelity research in the nuclear reactor system.