• 소성∙가공
• /
• 제11권8호
• /
• pp.710-715
• /
• 2002

This paper describes the numerical determination of optimum blank diameter for sound material flow and high precise thread profile of a spindle screw through external thread rolling using two-three roll dies. Initial blank diameter affects the dimensional accuracy and surface finish qualities of a spindle screw in thread rolling process, therefore it is very important to determine the optimum blank diameter in thread rolling process. In order to determine the optimum blank diameter, this paper suggests the calculation method of initial bland diameter considering the real shape of tooth. The finite element code DEFORM is applied to analyze the metal flow of tooth, and these analytical results are verified by thread rolling experiment for spindle screw.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.312-315
• /
• 2002

This paper summarizes the results of a numerical study conducted to analyze the effect of selected process parameters on material flow and thread profile in thread rolling of large diameter blanks. Based on the previous work where a plane strain mode was found to provide a reasonable approximation of the thread rolling process, the effect of varying thread form, friction factor, flow stress, and blank diameter on effective strain and thread height was analyzed using the finite element code DEFORM. This study show that effective strain for flank angle, that blank diameter had important effect on the as-rolled thread while flow stress, friction factor, and crest round of dies had significant impact on effective strain at the thread root and crest and load of thread rolling. While the rate of strain harding was found to have an effect on the crest profile, the results indicate that it is the primary factor responsible for seam formation in rolled threads.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.279-286
• /
• 2014

목적: 임플란트가 식립되는 동적과정을 유한요소해석으로 모사하여, 임플란트 나사형상 차이가 변연골의 식립 응력발생에 미치는 영향을 조사하고자 한다. 재료 및 방법: 코어직경 3.5 mm, 매식부 길이 10 mm인 Straumann 임플란트 몸체 외형에 서로 다른 4종의 나사산이 부여된 가상의 임플란트 모델 4개를 CAD 프로그램을 이용하여 각각 제작하였다. 4종 나사산은 buttress 형, v-자 형, reverse buttress 형, square 형이며, 나사산의 높이와 피치는 0.3 mm와 1.0 mm로 모두 동일하다. 각 임플란트가 3.8 mm pilot hole을 갖는, 1.2 mm 두께 치밀골에 식립되는 과정을 $DEFORM^{TM}$ 3D (ver. 6, SFTC, Columbus, OH, USA) 프로그램을 사용하여 모사/해석하였으며, 식립이 진행되는 과정에 인접골에 생성/누적되는 응력(식립응력)을 비교 분석하였다. 결과: 임플란트 식립 초기, 그 하단부가 pilot hole 내로 진입하며 나사산이 골벽을 압박/변형시키는 단계에서 식립 토오크와 응력이 급격히 발생하였으며 그 이후에 토오크와 응력이 모두 감소하는 변화를 보였다. 식립 응력은 임플란트 나사산 형상에 따라 현저한 차이가 있었으며, v-자형 나사산 경우가 가장 낮았고, square 형의 경우가 가장 높았다. 나사산 차이가 인접골 응력에 미치는 영향은 나사산 첨부 보다는 기저부에 인접한 위치에서 더 현저하였다. 결론: 임플란트 식립응력을 낮추어 골융합에 유리한 환경을 조성하는데는 나사산 첨부가 상대적으로 날카로운 v-자형 나사산이 유리하다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 춘계학술대회 논문집
• /
• pp.133-137
• /
• 2002

This paper summarizes the results of a numerical study conducted to analyze the determination of optimum blank diameter on material flow and thread profile for Spindle Screw in external thread rolling. Initial blank diameter affect a quality of Spindle Screw in thread rolling process. Therefore, it is very important to determine the optimum blank diameter in thread rolling process. In order to determine the optimum blank diameter, this paper suggest the calculating method of initial blank diameter considering real shape of tooth. The finite element code DEFORM is applied to analyze the metal flow of tooth. then the analytical results are verified by experiment of thread rolling for Spindle Screw.

• 소성∙가공
• /
• 제28권4호
• /
• pp.183-189
• /
• 2019

Cylindrical worm reducers are generally used in various fields and forms throughout the industry, and demand is increasing due to their role as an integral part of the industry. Market trends require high-load, high-precision components, and small-sized reducers with large loads. When using a cylindrical worm reducer, a reducer designed with a reduced center distance while maintaining the same output torque results in gear wear. To overcome this difficulty, an enveloping worm gear reducer is introduced and studied. In this paper, three types of end mill tools are used to evaluate the tooth profile accuracy for each tool shape during machining of the tooth profile for a non-developed surface worm thread. The effect of the endmill shape on the accuracy of the tooth profile was analyzed by performing 3D modeling of the surrounding worm tooth profile based on the Hindley method. In this study, we analyzed tooth profile accuracy, tooth surface roughness, and tooth surface machining time, etc. Through the study, efficient machining conditions for the enveloping worm gears and the influence of parameters on the process were presented.

• 소성∙가공
• /
• 제29권3호
• /
• pp.144-150
• /
• 2020

In this paper, we propose the generation of a double enveloping worm thread profile with a non-developable ruled surface. Thread surface machining cuts all the way from the tip to the tooth root at one time, like full-face contact machining, rather than cutting several times like point machining. This cutting can reduce the cutting duration and achieve the smooth surface that does not require a grinding process for the threaded surface. The mathematical model of the cutting process was developed from theoretical equations, and the tooth surface was generated using two parameters and modeled in the CATIA using the generated Excel data. Additionally, the machining process of the worm was simulated in a numerical control simulation system. To verify the validity of the proposed method, the deviation between the modeling and the workpiece was measured using a 3D measuring machine.

• 정보처리학회논문지A
• /
• 제13A권3호
• /
• pp.205-210
• /
• 2006

본 연구에서는 견고한 멀티 쓰레드 소프트웨어 개발을 돕기 위한 쓰레드 모니터링 시스템을 개발하였다. 이 시스템은 쓰레드 실행 과정과 동기화 과정를 시각적으로 추적, 모니터링 할 수 있다. 또한 사용자는 실행 전에 옵션 선택을 통해 관심 있는 쓰레드와 동기화만을 선택하여 이들을 중점적으로 모니터링 할 수 있으며 실행 후에는 실행된 쓰레드와 동기화의 특징을 요약한 프로파일 정보를 제공한다. 본 연구에서는 코드 인라인 기법을 기반으로 이 시스템을 구현하였으며 실험을 통한 실험 결과를 통해 그 효융성을 보인다.

• 정보과학회 논문지
• /
• 제44권1호
• /
• pp.13-20
• /
• 2017

메시지 처리기란 클라이언트들로부터 수신된 다양한 포맷의 메시지를 수신 메시지 별 쓰레드를 생성하여 처리하고 그 결과를 목적지로 전달하는 서버 소프트웨어를 말한다. 본 논문에서는 SEDA(The Stage Event Driven Architecture) 구조의 메시지 처리기에서 각 수행함수가 CPU 또는 IO bound 특성을 가질 수 있다는 점에 착안하여, 수행 함수 별 특성을 고려해 쓰레드를 각 코어에 매핑하는 FC-TM(Function Characteristic aware Thread Mapping) 기법을 제안하였다. 본 논문에서는 메시지 처리에 필요한 각 수행함수의 특성이 정적인 것으로 가정하였다. 따라서 수행 가능한 함수를 미리 프로파일링(profiling)하여 특성을 분석한 후, 실제 수신되는 메시지에 따라 단위시간 당 처리량(throughput)이 최대가 되도록 쓰레드를 매핑하였다. 성능 평가 결과 IO bound한 함수가 특정 비율 이상 있을 경우, 기존 연구보다 단위시간당 처리량이 최대 72%까지 증가하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.350-353
• /
• 2007

This paper presents an real-time implementation of H.264/AVC High 4:4:4 Predictive profile decoder using general-purpose processors by exploiting multi-threading technique and Single Instruction Multiple Data (SIMD) instructions without any quality degradation. We analyze differences between the existing High profile and High 4:4:4 Predictive profile decoder, and show various optimization techniques to decode high fidelity and high definition (HD) video in real-time. Simulation results show that the proposed decoder can play high fidelity HD video at average 40 frames per seconds (fps) for the IBBrBP bistream and about 50 fps for the Intra-only bitstream.

• 한방비만학회지
• /
• 제15권2호
• /
• pp.137-143
• /
• 2015

The purpose of this study is to investigate the clinical studies of cupping therapy for obesity in Traditional Chinese Medicine (TCM) and to evaluate the effects of it for use in practice. CNKI were searched for controlled studies on cupping therapy for obesity that were published up to September 2015. The review included 9 randomized controlled trials, and we analyzed the objectives, process of interventions, outcome measurements, and main results of the studies. We found that cupping therapy combined with acupuncture, electric acupuncture or thread embedding have more effectively decreased body mass index, waist circumference and lipid profile than acupuncture, electric acupuncture or thread embedding only have done. In the reviewed studies, cupping therapy treated in the region of abdomen, upper and lower limbs, and dorsal part operating on 5 to 25 minutes for one time with total 6 to 45 times of schedule. In this study, we demonstrated that cupping therapy combined with acupuncture, electric acupuncture or thread embedding could have effectively used for treating obesity. Further evaluation and clinical researches are required to establish evidence in practice.