• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.827-834
• /
• 2020

본 연구는 주파수 체배기 이론을 이용하여 초고주파 항공용 레이다를 위한 3차 고조파 믹서 설계에 대한 연구이다. 기본 믹서 설계 방법과는 달리 주파수 체배기 이론을 이용하여 국부 주파수(LO)의 3차 고조파 성분이 최대가 되는 게이트 바이어스 전압을 선택하여 중간주파수(IF)에서 3차 고조파 혼합(mixing) 성분이 최대가 되도록 하였다. 제안한 고조파 믹서는 플라스틱 패키지의 상용 GaAs MESFET 소자를 이용하여 설계 및 제작하여 기존 초고주파 믹서의 높은 변환손실, 회로 복잡성, 높은 가격 및 제작 복잡도를 개선할 수 있었다. 제안한 설계 방법을 이용한 3차 고조파 믹서는 33 GHz ~ 36 GHz 대역에서 8 ~10 dB 변환손실 특성 및 0 dBm 선형성 (P1dB) 특성을 나타내었다.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1212-1216
• /
• 2015

In this paper, we compared the performance of the Right Handed Nonlinear Transmission Line (RH-NLTL) and Left Handed Nonlinear Transmission Line (LH-NLTL) as a harmonic generator. For a performance comparison, we fabricated both a RH-NLTL and a LH-NLTL harmonic generator whose operational bandwidth is from 0.5 GHz to 1.5 GHz. Under the each condition for the RH-NLTL and the LH-NLTL to maximize second harmonic, the output power of the second harmonic was 9.33 dB lower than the input power for the RH-NLTL and 12.67 dB lower than the input power for the LH-NLTL. Under the each condition for the RH-NLTL and the LH-NLTL to maximize third harmonic, the output power of the third harmonic was 13.33 dB lower than the input power for the RH-NLTL and 14.83dB lower than the input power for the LH-NLTL. Also, we have observed that, generatlly, a RH-NLTL is useful in generating various multiple harmonics and a LH-NLTL is useful in generating a specific order of harmonic by adjusting a proper DC vias, input frequency and input power. These tendencies could be a good guideline to use NLTLs as a frequency multiplier.

• Journal of Power Electronics
• /
• 제14권1호
• /
• pp.92-104
• /
• 2014

To insure stable operation and eliminate twice torque ripple, a topology for a six phase permanent magnet synchronous generator (SP-PMSG) with a neutral point connected together was analyzed in this paper. By adopting an extended transformation matrix, the mathematic model of the space vector control was established. The voltage and torque equations were deduced while considering the third harmonic flux and inductance. In addition, the suppression third harmonic method and the closed loop control strategy were proposed. A comparison analysis indicates that the cooper loss minimum method and the current magnitude minimum method can meet different application requirements. The voltage compensation amount for each of the methods was deduced which also takes into account the third harmonic effect. A simulation and experimental result comparison validates the consistency through theoretical derivation. It can be seen that all of the two control strategies can meet the requirements of post-fault.

• 전력전자학회논문지
• /
• 제10권4호
• /
• pp.323-330
• /
• 2005

본 논문에서는 고정자의 제 3고조파 전압 성분을 이용하여 브러시리스 직류 전동기의 회전자 위치를 간접 검출하는 방법을 제안하였다. 3고조파 성분은 회전자의 위치 정보를 가지고 있고 이 전압을 이용하여 전환 신호(Commutation signal)를 만들어 낼 수 있다. 따라서 전환 신호를 이용하여 구형파 전류 여자 브러시리스 직류 전동기를 센서리스로 운전하는 방식은 상지연 필터가 필요하지 않고 하드웨어적으로 전류의 전환 시점이 결정되므로 센서리스 드라이브용 프로세서의 부담을 줄일 수 있을 뿐만 아니라, 역기전력 파형과 상전류가 비교적 정확한 동기를 유지할 수 있으므로 넓은 속도 범위에서 안정적인 센서리스 운전이 가능한 방법이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.479-481
• /
• 1994

A direct vector control system of induction machine based determination of the spatial position of the airgap flux from the third harmonic component of the stator voltage is presented in this paper. The Rotor flux, necessary in direct vector control system, is estimated with the stator current and the airgap flux acquired from the third harmonic component of the stator voltage. And it will be used as an important information to implement the vector control system of the induction motor drive.

• Journal of the Optical Society of Korea
• /
• 제10권4호
• /
• pp.188-195
• /
• 2006

Third harmonic generation microscopy is described in the frame work of the theory of harmonic generation with Gaussian focused beams inside a bulk material as well as at the vicinity of an interface. This model is then applied to characterize different types of materials in terms of electronic third-order susceptibility. Examples of bulk glasses, poled glasses, laser-induced modifications in glasses and nanoparticles in solution are given in order to give a survey of the broad application field of THG microscopy in material characterization.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.218-219
• /
• 2016

This paper present Phase Shifted with carrier based on Sinusoidal PWM(SPWM) by using Cascaded NPC/H-birdge converter. The proposed Phase Shifted PWM method is adding third harmonic injection in switching signal. The advantage of the proposed method is reducing the voltage and capacity of the capacitor. This paper compare general Phase Shifted method with proposed Phase Shifted method that added the third harmonic injection. Each PWM method is tested without considering the switching loss by using PSIM 9.1.4 simulation.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.401-407
• /
• 2011

In order to enhance torque density of five-phase permanent magnetic synchronous motor with third harmonic injection for electric vehicles (EVs) applications, optimum seeking method for injection ratio of third harmonic was proposed adopting theoretical derivation and finite element analysis method, under the constraint of same amplitude for current and air-gap flux. By five-dimension space vector decomposition, the mathematic model in two orthogonal space plane, $d_1-q_1$ and $d_3-q_3$, was deduced. And the corresponding dual-plane vector control method was accomplished to independently control fundamental and third harmonic currents in each vector plane. A five-phase PMSM prototype with quasi-trapezoidal flux pattern and its fivephase voltage source inverter were designed. Also, the dual-plane vector control was digitized in a single XC3S1200E FPGA. Simulation and experimental results prove that using the proposed optimum seeking method, the torque density of five-phase PMSM is enhanced by 20%, without any increase of power converter capacity, machine size and iron core saturation.

• 한국수학사학회지
• /
• 제18권1호
• /
• pp.85-92
• /
• 2005

본 연구는 변분법과 조화사상 사이에 잘 알려진 내용을 개관하고, 조화사상의 성질 및 발전 과정을 정리하고, 구면 위의 라플라스 작용소의 기본 성질을 정리하고, 구면 사이의 고유함수 사상을 구성하기 위하여 스펙트럼과 고유함수를 계산하였다.

• Current Optics and Photonics
• /
• 제6권6호
• /
• pp.576-582
• /
• 2022

Plasmonic high-order harmonic generation (HHG) is used in nanoscale optical applications because it can help in realizing a compact coherent ultrashort pulse generator on the nanoscale, using plasmonic field enhancement. The plasmonic amplification of nanostructures induces nonlinear optical phenomena such as second-order harmonic generation, third-order harmonic generation, frequency mixing, and HHG. This amplification also causes damage to the structure itself. In this study, the plasmonic amplification according to the design of a metal-coated sapphire conical structure is theoretically calculated, and we analyze the effects of this optical amplification on HHG and damage to the sample.