• Journal of the Korean institute of surface engineering
• /
• v.23 no.4
• /
• pp.208-217
• /
• 1990

Electroless Ni-Cu-P plating was performed was performed to investigate for plating and changes in microhardness and corrosion rate of of electroless deposits depending on heat treatment. The activation energy for $75~85^{\circ}C$ were calculated to be 66.7KJ/mole. Plating rate increased to 34% with addition of 200ppm of NaF and 0.8ppm of thiourea to the bath. The highest hardness value was obtained by heat treatment deposits layer at$ 400^{\circ}C$, 1 hour. The increase in hardness of deposits by heating was confirmed to be associated with crystallization of the amorphous deposits. Corrosion resistance of deposir layer, which had been heated up to $300^{\circ}C$, was found to be exellent when immersed in 1N-H2SO4 solution, Change of the corrosion resistance seems to have some important bearing on content of amorpous, Ni3P and Cu3P.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1994

A low-temperature dyeing system for silk fabrics based on a redox system has been investigated. Some factors affecting dyeing of silk fabrics with levelling acid dyes in the absence and presence of certain redox system were investigated under different conditions. The variables studied were; type and concentration of redox system, dyeing conditions, i. e. temperature and time, dye concentration, material-to-liquor ration(LR) and colour fastness. The colour strength(K/S value) is outstandingly higher in the presence than in the absence of redox system. A comparison between the colour strength values of such dyeings abtained the three redox system would call for the following order ; Glyoxal/hydrogen peroxide>thiourea/hydrogen peroxide>glucose/hydrgen peroxide> nothing. In the presence of redox system, free radicals are supposed to be formed in both the fiber and the dye and the interaction between these free radicals bring about covalent fixation beside the usual electrostatic bonds, hydrogen bonds and Van der Waals forces.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.530-534
• /
• 2001

Effect of stripping solutions on the Duolite GT-73 chelating resin for ten elements, Ag(I), Al(III), Ca(II), Cd(II), Cu(II), Fe(II), Hg(II), Mn(II), Pb(II), and Zn(II), was investigated. Relation between affinities of the metal ions and solubility products of metal sulfides was studied. The smaller the solubility product of metal sulfideis, the larger the affinitie with the ionsis. The ions which have the solubility products larger than $10^{-23}$ could be effectively desorbed with nitric acid. Complexation with chloride ion enhanced the desorption efficiencies of the ions having moderately strong affinity with the resin. The ions which have very strong affinity by the chelating resin can be desorbed by complextion with thiourea and hydrochloric acid.

• Journal of the Korean institute of surface engineering
• /
• v.38 no.3
• /
• pp.112-117
• /
• 2005

In this paper, CdS thin films, which were widely used as a window layer of the CdS/CdTe and the $CdS/CuInSe_2$heterojunction solar cell, were grown by chemical bath deposition, and the structural, optical and electrical properties of the films on reaction temperatures were investigated. Cadmium acetate and thiourea were used as cadmium and sulfur source, respectively. And Ammonium acetate was used as the buffer solution. As the reaction temperatures were increased, the deposition rate of CdS fllms prepared by CBD was increased and the grain size was large due to increasing reaction rate in solution, also optical transmittance of the films in visible lights was increased on rising reaction temperatures.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.33-41
• /
• 2018

The manuscript reports synthesis of exceptionally stable gold nanoparticles (GNPs) using Momordica charantia fruit extract. The synthesis approach was optimized by refining three experimental variables including source of the fruit extract (peel, seed, and seed coat), pH of the solution, and temperature of the reaction medium. As synthesized GNPs showed excellent stability against various thiolated compounds (e.g., thioglycolic acid, thiourea, ${\text\tiny{L}}-cystine$, 1-dodecanethiol, and cysteamine hydrochloride). Moreover, these nanoparticles showed distinctive colorimetric responses against $Cd^{2+}$ and thiophenol (TP) from their potential interferences. The limit of detection (LOD) values for $Cd^{2+}$ and TP were determined as 0.186 and $0.154{\mu}M$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.7
• /
• pp.819-823
• /
• 1999

Antioxidant activities of various mushroom fruiting bodies were investigated in vitro. Among the mushroom extracts examined, Armillariella mellea, Daedalea dickinsi, Fomitella fraxinea and Pleurotus cornusopiae markedly exhibited inhibition on lipid peroxidaton of rat liver microsomes. Ergosterol peroxide (5,8-epidioxy-5α,8α-ergosta-6,22E-dien-3β-ol), antioxidant from A. mellea, was isolated by solvent extraction, silica gel column chromatography and recrystallization. The structure of the compound was determined by NMR, GC/MS and X-ray crystallography. Ergosterol peroxide showed potent inhibition on lipid peroxidation and exhibited higher antioxidant activity than well-known antioxidants, α-tocopherol and thiourea.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.228-234
• /
• 1996

The rates of solvolysis of 1-(4-methoxyphenyl)-1-aryl-2,2,2-trifluoroethyl chlorides[I] in a variety of solvents were measured by an electroconductometric method. LArSR relationships (Yukawa-Tsuno eq.)were found to give a linear plot, log(k/ko)=-1.84[σo+0.918(σ+-σo)], in 80% aqueous ethanol. Small |ρ| and r values in comparison with 1-aryl-1-(trifluoromethyl)ethyl tosylate(ρ=-6.09, r=1.59) suggested that the carbocationic charge in the transition state was dispersed by a strong p-π donor, p-methoxy group. Linear mY plots with m 0.90 for all of the substituents in aqueous acetone and m=0.60-0.82 for those of aqueous ethanol indicate that this solvolysis proceeds via an SN1 mechanism with nucleophilic solvent assistance. Thiourea effects and isokinetic temperatures for the rate of solvolysis also can prove the above mechanism.

• Bulletin of the Korean Chemical Society
• /
• v.5 no.5
• /
• pp.175-178
• /
• 1984

Two series of membranes have been prepared by postcrosslinking highly syndiotactic and isotactic poly (2-hydroxyethyl methacrylate), P(HEMA). The crosslinker used was hexamethylene diisocyante (HMDIC). The distribution coefficients (K$_{D2}$) of the model solutes such as urea (and thiourea), their derivatives, homologous alcohol series and amide sreies in water-swollen tactic P(HEMA) membranes at $25^{\circ}C$ were mesaured. In addition, the concentration effects of acetamide and butyramid were also measured. On the basis of hydrophobic interaction and the structural factors of tactic P(HEMA) membranes, the hydrophobic adsorption of the solutes in the polymer matrix were discussed. The results showed that the more hydrphobic the solute is, the higher the $K_{D2}$ value is. And the polymer conformation also affects the distribution of solvents.

• Archives of Pharmacal Research
• /
• v.12 no.3
• /
• pp.181-185
• /
• 1989

When 3-acetyl coumarin derivatives are treated with bromine, 3-(w-bromoacetyl) coumarin derivatives are obtained. The reaction of 3-(w-bromoacetyl)coumarin derivatives with thiourea or with amines for two hours leads to the formation of 2-Amino-4-(3-coumarinyl) thiazole or 3-(w-aminoacetyl) coumarin derivatives, respectively. While 3-(w-bromoacetyl) coumarin derivatives react with amines for 5-8 hours to yield imino derivatives of 3-(w-aminoacetyl) coumarin. The antimicrobial activity of Ia-b, IIa-c, IVc-f, IVh and V$_{c}$, f, h, k, m, and q was studied.d.

• Korean Journal of Food Science and Technology
• /
• v.11 no.1
• /
• pp.42-49
• /
• 1979

In order to evaluate the utility of the anthocyanins of Amaranthys tricolor L. as an edible pigment, the present study was undertaken to investigate the effects of pH. temperature, ascorbic acid, sugars and their degradation products, quercetin, thiourea, sodium pyrophosphate and metal ions on the stability of the anthocyanins in the model systems. The results obtained from this study were as follows. 1. The degradation of total anthocyanins was retarded as the pH levels decreased from 8.0 to 1.0. At pH 1.0, however. the initial degradation reaction proceeded faster than at pH 2.0 to 3.0 2. On heating in buffered aqueous solution at $80^{\circ}C$, the total anthocyanin content was higher at pH 2.0 than other pH levels. Increasing the storage temperature accelerated greatly the pigment degradation. In darkness at $40^{\circ}C$, after 10 days, only 19% of the original amount was left, while at $2^{\circ}C$, under the same conditions of storage, approximately 90% of the pigment was retained. The half-life of the pigment, 63.0 days at $2^{\circ}C$, shortened to 1. 7 days at $40^{\circ}C$. 3. An increase in ascorbic arid concentration from 0. 15 to 0.50 mg/ml lowered the anthocyanin retention. 4. There was no significant difference between glucose and fructose in anthocyanin degradation effect. Furfural was more effective than other sugar degradation products, formic acid or levulinic acid in accelerating anthocyanin breakdown. 5. Neither quercetin nor sodium pyrophosphate had a protective effect on the anthocyanins in the presence of ascorbic acid, while, in the systems 0.5 or 1 mg/ml of thiourea with $150{\;}{\mu}g/ml$ of ascorbic acid, the loss of anthocyanins was significantly reduced. 6. Both mercuric and cupric ions in 30 ppm greatly accelerated anthocyanin degradation.