• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.721-729
• /
• 2015

Wood properties depend on not only environmental factors such as soil, climate change, or forest stand characteristics, but also silviculture practices such as thinning, regeneration, or selection. This study report influences of the extent of thinning intensity from no thinning, moderate and heavy thinning to the wood property of Quercus acuta forest stands in Wan-do arboretum, Jeollanam-do Province. The results showed that there were close relationships between thinning intensity and anatomical, physical or mechanical properties of Quercus acuta wood. Especially, there are close relationships between thinning intensity and ring width or mechanical properties of wood. As a result, this study showed high correlations between Quercus acuta wood properties and thinning intensity of Quercus acuta forest stand. These findings are expected to be very useful as fundamental data for the implementation of silviculture practices of this specie to produce timber.

• The Korean Journal of Ecology
• /
• v.27 no.6 s.122
• /
• pp.363-367
• /
• 2004

Photosynthetically active radiation (PAR) beneath the forest canopy, understory species richness and diversity, and biomass were measured in a Larix leptolepis plantation seven years after thinning in Yangpyeong. Four different thinning intensities (control, $10\%,\;20\%\;and\;40\%$ stocking reduction) were applied in 1997. The current PAR values were lower than those measured four years after thinning, and PAR at the heavy thinning plots was significantly higher than that of other thinning intensities. A total of 23 species including 9 tall-trees and 14 shrubs were found for the high layer while a total of 82 species including 10 tall-trees, 29 shrubs, and 43 herbs for the low layer. Species richness and diversity generally increased with thinning intensities, and the trends were more evident for the low layer. Aboveground biomass significantly differed among thinning intensities for both shrubs and herbs. Also there was a negative correlation between biomass and the current number of stems per hectare. The current study suggested that the effects of thinning on light conditions at the forest floor, species richness and diversity and production of understory vegetation continued seven years after the treatment.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.57-62
• /
• 2008

Difference of failure modes was studied by finite element analysis for elbows with local wall thinning area particularly at inner surface of intrados of the elbow. Longitudinal wall thinning length, minimum thickness were kept constant but circumferential wall thinning width was varied to get $90^{\circ}$, $180^{\circ}$ and $360^{\circ}$ thinning width. Elastic-plastic analysis were carried out under the combined loading conditions of internal pressure and in-plane bending moment closing the elbow. Von Mises stress were obtained from the outer surface central surface location in intrados, extrados and crown parts in elbow. The results showed that the plastic deformation and failure started from the crown location when the thinning width small ($90{\sim}180^{\circ}$). However, plastic collapse started from the intrados location when the thinning width is approaching $360^{\circ}C$. This should be reflected to assess structural integrity of elbows after wall thinning measurement is made.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.63-63
• /
• 2019

The thinning Green ball apple was extracted using water and ethanol and a phenolic concentration of thinning Green ball apple was $50-200{\mu}g/mL$. The water and ethanol extracts of thinning Green ball apple showed 94.69% and 92.24% 1,1-diphenyl-2-picrylhydrazyl radical scavenging activity and 100.30% and 99.16% 2,2'-Azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging activity at phenolic concentration of $200{\mu}g/mL$, respectively. The water and ethanol extracts of thinning Green ball apple showed antioxidant protection factor of 1.76 antioxidant protection factor and 1.76 antioxidant protection factor, respectively. The water and ethanol extracts showed 101.46% and 99.64% anti-oxidative effect on thiobarbituric acid reactive substances at phenolic concentration of $200{\mu}g/mL$. Hence, the water and ethanol extracts of thinning Green ball apple can be considered a potential anti-oxidant. The water and ethanol extracts showed 33.28% and 32.14% hyaluronidase inhibition, respectively, at phenolic concentration of $150{\mu}g/mL$. The water and ethanol extracts showed 47.33% and 40.92% elastase inhibition and 46.19% and 65.58% collagenase inhibition at phenolic concentration of $200{\mu}g/mL$, respectively. About these experiments, thinning Green ball apple was found to exhibit anti-oxidation activity as well as hyaluronidase, elastase and collagenase inhibitory activities. Therefore, thinning Green ball apple can be considered a potential source for functional food.

• Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.85-98
• /
• 2022

Background: Korean white pine (Pinus koraiensis) is a major commercial species, and the importance of the oak trees (Quercus spp.) is increasing due to various factors such as environmental and ecological values. However, more information is required to clearly understand the growth characteristics of these species especially regarding thinning intensity. This study was performed to provide the basic information to develop the silvicultural guideline and field manual by analyzing tree and stand characteristics in line with thinning intensity in the Korean white pine plantation and oak-dominated natural deciduous forest. Results: Diameter at breast height (DBH) and volume changes by the thinning intensity in the Korean white pine plantation were significantly different from those in the oak-dominated deciduous natural forest. In particular, DBH distribution in the pine stand appeared that there were more large diameter trees as the thinning intensity was higher. DBH periodic annual increment (PAI) of the pine stand was higher as the thinning intensity was stronger and the growth period was shorter. This trend was similarly shown in the natural deciduous forest, but the amount of PAI was smaller than in pine stand. The volume PAI after thinning was not decreased over time. In each stand type, the PAI tended to be lower as stand density was higher. The volume PAI in the pine stand was significantly higher than that in the oak-dominated natural deciduous forest. Dead trees occurred the most in the unthinned plots of each stand type, and those were higher in the natural deciduous forest. Ingrowth trees were observed only in the natural deciduous forest, and its distribution was the lowest in unthinned plots; Korean white pine as ingrowth occurred the most frequently among many tree species. Conclusions: Different effects of thinning treatment on DBH and volume PAI, mortality, and ingrowth were observed for each stand. With respect to forest growth, Korean white pine plantation was superior to the oak-dominated natural deciduous forest. The results of this study offer fundamental information for the development of silvicultural guidelines for Korean white pine plantations and oak-dominated natural deciduous forests in Korea.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.2
• /
• pp.104-111
• /
• 2023

As apple trees mature, it is important to maintain good light distribution within the canopy to produce marketable fruits. Tree thinning is the selective removal of a proportion of trees growing in the orchard to provide more growing space and a good light environment for the remaining trees. This study was conducted over 3 years (14-16 years after planting) to investigate the influence of tree thinning on vegetative growth, yield, fruit quality, and blooming in the 14 years old slender spindle 'Fuji'/M.9 apple trees planted with the tree space of 3.2×1.2 m. The trees were placed in a control group (no thinning; 260 trees per 10 a) or a tree thinning group (thinned 50% of the control; 130 trees per 10 a). The tree thinning successfully improved light penetration, yield per tree, fruit red color, and yield efficiency for 3 years, and the tree thinning controlled the occurrence of biennial bearing. However, tree thinning significantly decreased accumulated yield per 10 a compared with the control. The vegetative growth, yield per tree, soluble solid contents, and blooming were not clear by the occurrence of biennial bearing in the control. These results indicated that tree thinning was a good method for improving light penetration and preventing biennial bearing in the old 'Fuji'/M.9 high-density apple orchards.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.1-6
• /
• 2009

A Thinning algorithm is a very Important factor in order to recognize the character, figure, and drawing. Until comparatively lately, the thinning algorithm was proposed by various methods. In this paper, we ascertain the point at issue of ZS(Zhang and Suen), LW(Lu and Wang) and WHF(Wang, Hui and Fleming) algorithms that are the parallel thinning algorithms. The parallel thinning algorithm means the first processing doesn't have to influence to the second processing. ZS algorithm has a problem which loses pixels in slanting lines and LW algorithm doesn't have one pixel width in slanting lines. So I propose an advanced parallel thinning algorithm that connects the pixels each other and preserve the end point.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.8-17
• /
• 2003

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear Power Plant. In Pipes of energy Plants, sometimes, the local wall thinning may result from severe erosion-corrosion (E/C) damage. However, the effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. In this paper, the monotonic bending tests were performed of full-scale carbon steel pipes with local wall thinning. A monotonic bending load was applied to straight pipe specimens by four-point loading at ambient temperature without internal pressure. From the tests, fracture behaviors and fracture strength of locally thinned pipe were manifested systematically. The observed failure modes were divided into four types; ovalization. crack initiation/growth after ovalization, local buckling and crack initiation/growth after local buckling. Also, the strength and the allowable limit of piping system with local wall thinning were evaluated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.533-542
• /
• 2006

In order to assess the integrity of pipes with local thinning area, the plastic strain as well as the elastic strain at the root of thinned region are required particularly when fluctuating load is applied to the pipe. For estimating elastic-plastic strain at local wall thinning area in a straight pipe under tensile load, an estimation model with idealized fully circumferential constant depth wall thinning area is proposed. Based on the compatibility and equilibrium equations a nonlinear estimation equation, from which local elastic-plastic strain can be determined as a function of pipe/defect geometry, material and the applied strain was derived. Estimation results are compared with those from detailed elastic-plastic finite element analysis, which shows good agreements. Noting that practical wall thinning in nuclear piping has not only a circular shape but also a finite circumferential length, the proposed solution for the ideal geometry is extended based on two-dimensional and three-dimensional numerical analysis of pipes with circular wall thinning.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.847-852
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feed-water heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare wall thinning range according to change entrance nozzle diameter and position with reference numerical analysis model's wall thinning range, various numerical analysis models applied. In case of changing diameter, four different diameter is applied. And a side of nozzle position, two different position-vertical type and parallel type-is applied. And then this paper describes operation of numerical analysis which is composed similar condition with real feed water heater. In conclusion, this study shows effective design for shall wall thinning by changing nozzle diameter and position.