• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.44-45
• /
• 1998

1. 서론 : 공기의 산소/질소 분리용 고분자막은 높은 선택도와 높은 투과도를 동시에 요구한다. 이 두가지 조건을 만족시키는 새로운 소재 개발과 기존의 고분자물질을 수식하는 연구가 진행되고 있으나 trade-off 현상으로 인하여 선택도가 증가되면 투과계수가 감소되고, 투과계수가 증가되면 선택도가 감소되는 경향이 있다. 다공성 지지체의 표면에 selective thin layer를 coating한 복합막은 투과저항을 줄여 투과속도는 증가시킬 수 있으나 선택도는 고분자 고유의 80%정도까지 감소되는 것으로 알려져 있다. (생략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.170-174
• /
• 2004

Most of thin film composite reverse osmosis membranes include amide linkages, which are susceptible to chlorine attack resulting in N-chloro derivatives. This study examined a new method based on post-treatment of reverse osmosis membrane with various silane derivatives to improve chlorine resistance. The silane derivatives contain one alkyl group and three alkoxy groups such as trifluoromethyltrimethoxysilane, 3-aminopropylmethoxydiethoxysilane and 3, 3, 3-trifluoropropyltrimethoxysilane. Compared to commercial membranes, silane derivatives coated membranes showed significantly enhanced chlorine durability.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.362-367
• /
• 2023

Recently, research and development of proton exchange membrane fuel cells (PEMFC) membranes are progressing in the direction of thinning to reduce prices and improve performance. Demand for hydrogen-powered vehicles for commercial vehicles is also increasing, and their durability should be five times greater than those for passenger vehicles. Despite the thinning of the membranes, the durability of the membranes must be increased five times, so the improvement of the durability of the membranes has become more important. Since the acceleration durability evaluation time also needs to be shortened, the protocol using oxygen instead of air in the existing protocol was applied to a 10 ㎛ thin membrane to evaluate durability. The accelerated durability test (Open circuit voltage holding) was terminated at 720 hours. If the air-based department of energy (DOE) protocol was used, a lifespan of 450,000 km of driving hours would be expected, with a durability of about 1,500 hours. During the chemical durability evaluation, the active area of the electrode decreased by 51%, suggesting that catalyst degradation had an effect on membrane durability. Reducing the catalyst degradation rate is expected to increase membrane durability.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.5
• /
• pp.442-449
• /
• 2018

Research on High temperature polymer electrolyte fuel cell (HT-PEMFC) has actively been conducted all over the world. Since the HT-PEMFC can be operated at a high temperature of $120-180^{\circ}C$ using phosphoric acid-doped polybenzimidazole (PBI) electrolyte membrane, it has considerable advantages over conventional PEMFC in terms of operating conditions and system efficiency. However, If the thermal distribution is not uniform in the stack unit, degradation due to local reaction and deterioration of lifetime are difficult to prevent. The thin plate separator reduces the volume of the fuel cell stack and improves heat transfer, consequently, enhancing the cooling effect. In this paper, a large area flow field of thin plate separator for HT-PEMFC is designed and sub-stack is fabricated. We have studied stack performance evaluation under various operating conditions and it has been verified that the proposed design can achieve acceptable stack performance at a wide operating range.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.386-388
• /
• 2006

Membrane proteins in highly oriented lipid bilayer samples are useful for membrane protein structure determination. We used in the past planar lipid bilayers which were aligned and supported on the glass slide. These samples were mechanically aligned in a magnetic field. However, these stacks of glass slides with planar lipid bilayers are not well suited for use with a commercial solid-state NMR probe with a round coil. Therefore, a homebuilt solid-state NMR probe was built and used with a stack of thin glass plates wherein the RF coil was wrapped directly around the flat square sample. Recently, we began to use magnetically aligned bicelles that are suitable for the structure determination of membrane proteins by solid-state NMR spectroscopy without any effort to build a flat square coil probe. These bicelle samples are well suited for use with a commercial solidstate NMR probe with a round coil, are very easy to prepare and are very stable, so that they can be kept for more than a year. In this paper, we present the solid-state NMR spectra of optimized and magnetically oriented bicelle samples of membrane proteins.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.3
• /
• pp.112-124
• /
• 2017

As an LNG carrier preserves and transports liquefied natural gas under minus $163^{\circ}C$, the cargo tank has to have sufficient hull strength against not only the wave loads but also against loads caused by loading and unloading and thermal expansion to keep the LNG safely. The main insulation types for a CCS are No.96 and Mark III from GTT for the membrane LNG carrier. Particularly, the invar membrane plate in No.96 is very thin and its connections could experience high local stresses owing to such dynamic loads. Therefore, it should be verified whether those connections have sufficient fatigue lives for the purpose of operation and maintenance. This research aims at performing fatigue analysis with 0.1 fatigue damage criteria for 40 years of design life to support new membrane CCS development using proper S-N curves and the associated finite element modeling technique for each connection and then propose a reasonable design methodology.

• Korean Journal of Veterinary Research
• /
• v.59 no.2
• /
• pp.105-108
• /
• 2019

A 4-year-old cat was referred for a suspected pulmonary mass. True diaphragmatic hernia presence was diagnosed via computed tomography (CT). There was a thin membrane covering the diaphragmatic defect. The membrane was thinner than the diaphragm. After contrast injection, the membrane was less enhanced than that of the normal diaphragm. The membrane was identified as a remnant of the parietal pleura. In addition, contrast-enhanced CT images provided clarity in viewing the herniated liver and falciform fat. A thinner membrane, covering the diaphragmatic defect, and attached to the thicker normal diaphragm, is considered a unique CT feature of true diaphragmatic hernia.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.279-282
• /
• 2007

When reformer for fuel cell is used, CO in hydrogen gas leads to a seriously decreased membrane electrode assembly (MEA) performance by catalyst poisoning. The effect of CO on performance of modified MEA by sputtering method is studied in this paper. The experimental results show that sputtered Pt and Ru thin film improve a single cell performance of MEA and sputtered metal thin film has a CO tolerance. The air injection process on anode show improved CO tolerance test result. Moreover, Pt, Ru and PtRu thin film by sputtering had influence on the CO tolerance with air injection process.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.55-56
• /
• 1994

There has been many attempts to improve the membrane performance using pervaporation processes[l-3]. They are 1) blending polymer with the high flux and one with high selectivity, 2) an incorporation of functional groups interacting with permeants into a membrane through copolymerization or modification, 3) composite membrane or asymmetric membrane structure with a thin skin layer which acts as a selective layer. Among them, a polymeric membrane containing ion complex group receives an extensive attention recently because ionic complex is known to activate the water transport through ion-dipole interaction. It is especially advantageous in the separation of organic-water system. We applied the ideas of the activation of water transport through ion-dipole. We have reported on the in-sire complex membrane to separate water from aqueous aceiic acid and pyridme solution[4-5] based on the simple acid-base theory. Water transport was enhanced through in-situ complex between pyridine moiety in the membrane and the incoming acetic acid in the feed. In this case, catalytic transport mechanism was proposed. In the present study we used pyridine solution as a feed and the sulfonic acid group in the membrane.

• Membrane Journal
• /
• v.30 no.5
• /
• pp.350-358
• /
• 2020

A membrane capacitive deionization (MCDI) cell is constructed by applying thin layer of a cation exchange membrane (Nafion) on cathode and an anion exchange membrane (aminated polyphenylene oxide, APPO) on anode. Compared to CDI cell without CEM and AEM coating, MCDI exhibits enhanced salt removal efficiency. When Nafion and APPO are used as CEM and AEM, optimized salt removal performance as high as 82.1% is observed when 1.2 V is applied for 3 min during absorption process and -1.0 V is applied for 1 min during desorption.