• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.111-114
• /
• 2001

In this paper, the electromagnetic coupling problems are tackled on slots with nonzero thickness. The analysis is carried out by combination of the thin-wire concept and the Method of Moment(MoM) for the sake of improving computation efficiency. Under the conditions to be presented, slots can be replaced with wires that have effective radii. Also, the infinite summation-type Green's functions are calculated for the parallel-pale structure. A slot in an infinite ground is analyzed and its results are compared with the measurement in a literature. Furthermore, it is examined how the slots couple in parallel plates.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.550-554
• /
• 2003

In order to detect very short electromagnetic pulses (EMP) with picosecond width, a receiving antenna with a wide bandwidth and good sensitivity over several GHz is needed. In this paper, the receiving characteristics of various thin wire monopole (or dipole) antennas with nonreflecting resistive loading are analyzed for determining the optimum configurations. This study also indicates that it is possible to choose an ideal load impedance for achieving the required fidelity and sensitivity. The analysis is facilitated by introducing the frequency transfer function.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E2호
• /
• pp.57-65
• /
• 2005

An experimental study was performed on the decomposition of gaseous ammonia and two selected volatile organic compounds (VOCs: toluene and acetone) in a combined nonthermal plasma reactor with corona and glow discharges. A lab pilot scale reactor (206 liter) equipped with a high electric power pack was used to determine the decomposition efficiency in relation with the inlet concentration and applied voltage. Three different types of discharging electrode such as wired rack, wire strings for corona discharge, and thin plate for glow discharge were put in order in the reactor. While decomposition of ammonia decreased with an increase in the initial concentration, acetone showed an opposite result. In the case of toluene however no explicit tendency was found in toluene and aceton. Negative discharge resulted in high decomposition efficiency than the positive one for all gases. A better removal of gas phase element could be achieved when fume dust were present simultaneously.

• 소성∙가공
• /
• 제17권2호
• /
• pp.91-96
• /
• 2008

The governing parameters affecting the fatigue properties have been investigated experimentally in the high carbon steel wires with 0.94 wt.%C. In order to find the crucial factors, the advanced analysis techniques such as optical 3-D profiler, focused ion beam(FIB) and transmission electron microscope(TEM) were used. The two-type steel wires with different drawing strain were fabricated. The fatigue properties were measured by hunter rotating beam tester, specially designed for thin-sized steel wires. It was found that the fatigue properties of the steel wires with high drawing strain was higher than that with other wires because of low residual stress and high adhesion condition of brass coating layer.

• 오토저널
• /
• 제12권6호
• /
• pp.60-66
• /
• 1990

In order to measure the piston surface temperature and heat flux, autors have developed the measuring system with an instantaneous temperature probe. Such the instantaneous temperature probes were embodied into the top of piston for measurement and L-link system, designed to fit the test engine, extracts the thermocouple wires from the piston outside of engine employing a mechanical linkage. Then the instantaneous surface temperature was measured to calculate the heat flux flowing into the top surface of piston in a spark ignition engine. As a result, the following phenomena have been obtained through the study. 1) It is found that the time response and durability of temperature probe with a thin film thickness 10um and mechanical linkage with thermocouple wire extraction is sufficient at this experiment. 2) For the quantitative effect of variation in engine speed, the temperature swing and heat flux on the top of piston increase with increasing the engine speed. 3) It is proved that the temperature swing and heat flux decrease with distance from spark plug.

• 마이크로전자및패키징학회지
• /
• 제2권1호
• /
• pp.59-68
• /
• 1995

박막제조 기술 및 BGA패캐지를 이용하여 Wellcom 2000 system 소요 OCU Board 의 집적화를 구현하였다. 기존 PCB에 실장되는 소자 일부를 2 Channel BGA 패캐지로 모 듈화한 결과 약 1/6로 소형화시킬수 있었으며 8 Channel의 모율화는 현재 진행중인 다층 구조의 제조 기술 개발과 아울러 BGA 패캐지로 실현이 가능하며 1/10로집접화할수 있음을 알수 있었다. 또한 PCB위에 Bare Chip을 실장하여 Wire Bonding 한 COB를 구현하여 CBGGA의 PCB실장과 함께한 모듈을 형성해 보았다. CBGA패캐지에 Ball Shear Test, In Circuit Test 온도 환경주기시험(TCT) 진동시험을 통하여 신뢰성을 입증하였다. 이때 CBGA의 Coplanarity(3.2%) 증진을 위하여 Ceramic Pad에 선택적인 도금 방식을 개발적용 하였다.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.168-174
• /
• 2012

This paper presents a bending propagating actuation using SMA (Shape Memory Alloy) spring for an effective shape transition of a flytrap-inspired soft morphing structure. The flytrap-inspired soft morphing structure is made from unsymmetric CFRP (Carbon Fiber Reinforced Prepreg) structure which shows bi-stability and snap-through phenomenon. For a thin and large curved bistable CFRP structure, SMA spring is more acceptable than SMA wire and piezoelectric actuator which used in previous investigations. A bending propagating actuation is proposed which can induce snap-through of the bi-stable CFRP structure effectively. From this research, effective shape transition of soft morphing structure is possible.

• 한국통신학회논문지
• /
• 제11권4호
• /
• pp.241-250
• /
• 1986

안테나 해석 및 설계에 있어 전류분포는 그 기본을 이루고 있다. 본 연구에서는 가는 도체를 평면상에 감은 나선형 산란체에 평면파가 입사한 경우의 나선형 도체의 전류분포를 적분방정식을 세워서 구하는 방법을 제시하고, 나선형 산란체의 길이(회전수)와 입사파의 입사각을 바꾼 경우의 전류분포를 계산한 결과를 제시하였다 수치 해석으로는 기저 함수로 Cubic B-Spline 함수를 이용한 Point matching 방법을 적용하였다.

• 동력기계공학회지
• /
• 제10권1호
• /
• pp.71-76
• /
• 2006

This paper aims to study several type heaters which are mica heater, film heater, quartz heater and rod heater and to get an temteraturel and electrical characteristics. These four type heaters have a merit in many fields than present electric heater with nichrome wire. Carbon and mica plate heater have higher heat efficiency and less electromagnetic waves. Also it has been reported that far infrared ray emission from this heater is good for our health. Additionally heating element is thin and lighter plate. For these reasons, they will be widely used to various application such as room-heating or manufacturing goods. Experimental result confirmed that when 220V current authorized, the temperature, electric current, electric power and the resistance rise to stationary state in early stage. Moreover, the temperatures and electric characteristics show a good stability.

• 통합자연과학논문집
• /
• 제2권4호
• /
• pp.289-292
• /
• 2009

Perchlorosilanes are useful precursors for the synthesis of hydrosilanes for the fabrication of electronic devices such as silicon thin-film transistors and silicon nanoparticles. For this solution process, requirements of precursors applicable to solution process are relatively low volatile and soluble in common organic solvents. In this work, the decaphenylcyclopentasilane has been obtained from the reaction of the lithium wire and dichlorodiphenylsilane. The reaction of decaphenylcyclopentasilane with lewis acid catalyst, HCl/$AlCl_3$, gives the perchlorocyclopentasilane. Decaphenylcyclopentasilane exhibits an unusual optical property. Its optical property was characterized by UV-vis and fluorescence spectroscopy. Absorption wavelength maxima for the decaphenylcyclopentasilane was 272 nm. Decaphenylcyclopentasilane displayed an emission band at 741 nm with excitation wavelength of 272 nm.