• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.14-23
• /
• 1987

This study was carried out to investigate the anatomical characteristics, the radial and axial variation of the cell dimension and bulk density for four bamboo species used as the major material of bamboo products in Korea; Phyllostachys(P.bambusoides, P.edulis, P.nigra var.henonis, and Pnigra). The results obtained were summarized as follows; 1) In the outer part of culm, the mophological difference of cell diameter and distribution were not acknowledged. However, gum-like substance was occurred In the epidermis, hypodermis, cortex and metaxylem vessel of P.nigra, while it was occured only in the metaxylem vessel of P.edulis. 2) The protoxylem vessel in the central zone of culm-wall could be in the two types; the first type consisted of 4-5 small cell pieces occurred in P.edulis and P.nigra var. henonis, the second type of 1-2 large cell pieces in P.bambusoides and P.nigra. And transition of cell diameter from the vascular bundle sheath to the ground tissue was gradually enlarged in P.nigra and P.edulis but abruptly in P.bambusoides and P.nigra var. henonis. 3) Thin-wall tyloses were well developed in the outer and central zone of culm-wall in four species. 4) Compared with the central part of culm-wall, the number of parenchyma cells and the amount of the vascular bundle sheaths per unit area were a few in the inner part. The inner part nearest to the pith cavity was consisted of thick-well parenchyma cell. 5) The dimensional variations of metaxylem vessel and parenchyma cell in the radial direction were decreased from the inner part to the epidermis in all species observed. 6) The fiber length was the maximum in the central zone and its diameter was increased from the inner part to the outer part. In the axial variation. fiber length was slightly increased from the base and then decresed slowly toward the top, and its diameter was reverse. 7) The axial variation of the bulk density was continuously increased from the base toward the top and its radial variation was rapidly increased from the inner part to the epidermis.

• 한국항공우주학회지
• /
• 제37권1호
• /
• pp.62-68
• /
• 2009

하이브리드 로켓 연소에서 발생하는 산화제 난류 유동과 연료의 기화로 인한 분출유동 사이의 상호 간섭은 매우 복잡하고 특별한 유동 간섭을 일으킨다. 이를 연구하기 위하여 연소반응을 제외하고, 산화제의 난류 유동과 연료 벽면에서의 분출 유동을 모사한 채널 유동에 대한 LES 해석을 수행하였다. 고체추진 로켓의 연소 과정에서 관찰되는 현상과 매우 흡사하게 벽면 근처에서 특정주파수로 진동하는 유동 현상이 존재한다는 것을 확인하였고, 산화제와 분출 유동의 간섭에 기인한 유동의 진동현상은 벽면 근처의 매우 얇은 영역에서만 존재하였다. 큰 길이 스케일의 유동현상을 보여주는 압력 섭동장으로부터 채널 내 주유동이 특정 주파수 특성을 갖고 하류로 진행해 가는데, 이는 산화제 유동이 분출유동과 상호작용을 하면서 발생된 전단유동의 특성을 나타낸 것이다. 그러나 하이브리드 로켓 연소실 유동의 진동 특성은 고체 추진 로켓에서 관찰되는 유동 특성과는 달리, 진동의 강도가 벽면에서 온도 구배를 변화시켜 열전달의 향상을 발생시키기에는 충분하지 못한 것으로 보인다. 그러나 벽면 근처에서 특정 주파수 특성을 갖는 유동현상이 존재한다는 사실은 비슷한 크기의 주파수를 갖는 음향 가진과 같은 외부교란이 작용한다면 공진으로 발전할 수 있는 가능성을 의미한다.

• 정보처리학회논문지B
• /
• 제10B권7호
• /
• pp.837-846
• /
• 2003

본 연구에서는 아파트의 설계도면을 처리의 대상으로 하고 있다. 이러한 아파트 도면은 굵고 평행한 두 개의 선으로 표현되는 주벽과 심볼(문, 창, 베란다. 타일 $\cdots$), 치수선(Dimension Line), 치수보조선, 여러 가지 수치를 나타내는 숫자(치수)와 문자 등으로 구성되어 있다. 본 연구에서는 이러한 아파트 도면 내에서 아파트 건물의 골격을 이루는 주벽을 인식하는 방법을 제시하고 있다. 이를 위해서 가는 라인을 제거하고 굵은 라인만을 남기는 이진화 방법을 사용하여, 이러한 라인들을 벡터화하고, 주벽의 존재위치를 한정하였다. 이를 이용해 치수보조선을 구하고 찾은 피수보조선을 이용하여 주벽을 검출하고, 찾아진 주벽에 연결되는 다른 주벽으로 영역을 확장해 나가는 방법을 구현하였다. 마지막으로, 주벽사이에 있는 창문은 비록 주벽이 아닌 창문 심볼로 표현되어 있더라도 주벽으로 인식해야 하기 때문에, 찾아진 주벽을 이용해 이들 주벽사이에 존재하는 창문을 찾는다. 실험결과 인식률에서 본 연구에서 제시하는 방법이 96.5%의 인식율을 나타내어 Karl Tombre 연구팀의 방법 90.7%보다 5.8% 더 우수하게 나타났고, 오인식의 수도 작게 나타났다.

• Journal of Chest Surgery
• /
• 제41권2호
• /
• pp.289-291
• /
• 2008

다형성 초자화 혈관 확장 종양은 경미한 악성종양의 특성을 가지며 주로 하지의 표재성 연조직에 발생하는 매우 회귀한 종양으로 알려져 있다. 조직학적으로 확장된 혈관 주위에 비 활동성 유사분열의 판(sheet)과 다발(fascicle)로 이루어지면서, 혈철소(hemosiderin)가 점점이 박혀 있는 방추형의 다형성 세포로 이루어진 종양세포로 구성되며, 유사분열이 거의 없는 것이 그 특징적 소견으로 알려져 있다. 저자들은 우측 전 흉부의 종괴 촉지를 주소로 내원한 50세 남자환자에서 상기 질환을 치험하였기에 문헌 고찰과 더불어 보고하는 바이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1225-1234
• /
• 2009

As the Wenchuan Earthquake was of high magnitude and shallow seismic focus, it caused great damage and serious geo-hazards. By the field investigation and remote-sensing interpretation after the earthquake and by using means of GIS, the distribution of geo-hazards triggered by the earthquake was analyzed and the conclusions are as follows: (1) the earthquake geo-hazards showed the feature of zonal distribution along the earthquake fault zone and linear distribution along the rivers; (2) the distribution of earthquake geo-hazards had a marked hanging wall effect, for the development density of geo-hazards in the hanging wall of earthquake fault was obviously higher than that in the foot wall and the width of strong development zone in the hanging wall was about 10 km; (3) the topographical slope was a main factor which controlled the development of earthquake geo-hazards and a vast majority of geo-hazards were distributed on the slopes of 20 to 50 degrees; (4) the earthquake geo-hazards had a corresponding relationship with the elevation and micro-landform, for most hazards happened in the river valleys and canyon sections below the elevation of 1500 to 2000 m, particularly in the upper segment of canyon sections (namely, the turning point from the dale to the canyon). Thin ridge, isolated or full-face space mountains were most sensitive to the seismic wave, and had a striking amplifying effect. In these areas, collapses and landslides were most likely to develop; (5) the study also showed that different lithologies determined the types of geo-hazards, and usually, landslides occurred in soft rocks, while collapses occurred in hard rocks.

• Archives of Plastic Surgery
• /
• 제38권5호
• /
• pp.691-694
• /
• 2011

Purpose: With an increase in the population of immunocompromised patients, the incidence of maxillary sinus aspergillus infection has also escalated. Maxillary sinus aspergillosis is generally extended to the sinus antrum, base or thin orbital wall and ethmoid air cell region. We experienced a case of maxillary sinus aspergillosis which was extended directly to the soft tissue of the cheek. Methods: A 46-year-old man with acute myelogenous leukemia was consulted for the defect of the anterior wall of the maxillary sinus, and cheek. Radiologic and histologic findings were consistent with invasive maxillary sinus aspergillosis. The otolaryngology department performed debridement via endoscopic sinus surgery first. Coverage of the resulting defect in the anterior wall of the maxillary sinus and its inner layer was undergone by the plastic and reconstructive surgery department, using a pedicled superficial temporal fascia flap and a split thickness skin graft. The remaining skin defect of the cheek was covered with a local skin flap. Results: The patient went through an uneventful recovery. There was no recurrence during 6 months of follow-up. Conclusion: Maxillary sinus aspergillosis usually involves the orbit or the gingiva but in some cases it may directly invade soft tissues of the cheek. Such an atypical infection extending into the cheek may lead to a large soft tissue defect requiring coverage. Thus, any undiagnosed soft tissue defect involving the cheek or maxillofacial area, especially in immunocompromised patients, should be evaluated for aspergillosis. We present this rare case, with a review of the related literature.

• 한국지진공학회논문집
• /
• 제23권5호
• /
• pp.239-248
• /
• 2019

In this study, the out-of-plane seismic resistance of lightly-reinforced existing walls strengthened with thick RC jacket was investigated. The thick RC jacket with a thickness of 500 mm was placed at one side of the thin existing wall with a thickness of 150 mm. At the interface between the wall and RC jacket, a tee-shaped steel section with a number of anchor bolts and dowel bars was used as the shear connector. To investigate the connection performance and strengthening effects, the cyclic loading tests of four jacketed wall specimens were performed. The tests showed that the flexural strength of the jacketed walls under out-of-plane loading was significantly increased. During the initial behavior, the tee shear connector transferred forces successfully at the interface without slip. However, as the cracking, spalling, and crushing of the concrete increased in the exiting walls, the connection performance at the interface was significantly degraded and, consequently, the strength of the jacketed walls was significantly decreased. The flexural strength of the jacketed walls with tee shear connector was estimated considering the full and partial composite actions of the tee shear connector.

• 대한조선학회논문집
• /
• 제59권2호
• /
• pp.64-71
• /
• 2022

In this paper, we simulate the collision of a solitary wave on a vertical wall in a uniform water channel and investigate the effect of damping on the amplitude attenuation. In order to take into account the damping effect, we introduce the Stokes damping whose dissipation is dependent on the velocity of wave motion on the surface of a thin layer of oil. That is, we use the improved Boussinesq equation with Stokes damping to describe the damped wave motion. Our work mainly focuses on the amplitude attenuation of a propagating solitary wave, which may depend on the Stokes damping together with the initial position and initial amplitude of the wave. We utilize the method of images and a powerful numerical tool (functional iteration method) for solving the improved Boussinesq equation, yielding an effective numerical simulation. This enables us to find the amplitudes of the incident wave and reflected one, whose ratio is a measure of the (wave) amplitude attenuation. Accordingly, we have shown that the reflection of a solitary wave by a vertical wall is dependent on not only the initial amplitude and position of a solitary but the Stokes damping.

• 한국진공학회지
• /
• 제17권4호
• /
• pp.365-373
• /
• 2008

최적화된 량의 황화수소 첨가 가스를 이용하여 실리콘 기판위에 증착된 Fe/Al 박막위에 촉매 화학 기상 증착법을 사용하여 직경이 얇은 다중층 탄소나노튜브가 수직 정렬되어 합성되었다. 주사전자현미경 관측 이미지에서 합성된 탄소나노튜브는 상대적으로 일정한 길이를 가지고 기판에 수직으로 정렬되었다. 투과전자현미경 관측에서 합성된 탄소나노튜브는 10nm 이내의 작은 외경을 가졌고 촉매가 거의 없었다. 평균 튜브의 벽 수는 약 다섯 개이다. 수직 정렬된 직경이 얇은 다중층 탄소나노튜브의 성장 메카니즘이 제시되었다. 수직 정렬된 직경이 얇은 다중층 탄소나노튜브는 $0.1\;{\mu}A/cm^2$의 전류밀도에서 약 $1.1\;V/{\mu}m$ 낮은 턴-온 전계를 나타내었고 $2.7\;V/{\mu}m$의 전계에서 약 $2.5\;mA/cm^2$의 전류밀도를 얻었다. 게다가, 수직 정렬된 직경이 얇은 다중층 탄소나노튜브는 약 $1\;mA/cm^2$의 전류밀도에서 20시간동안 전류밀도 저하 없이 좋은 전계 방출 안정성을 보여주었다.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2390-2398
• /
• 2002

For integrity analysis of nuclear reactor pressure vessel, including the Pressurized thermal shock analysis, the fast and accurate calculation of the stress intensity factor at the crack tip is needed. For this, a simple approximation scheme is developed and the resulting stress intensity factors for axial semi-elliptical cracks in cylindrical vessel under various loading conditions are compared with those of the finite element method and other approximation methods, such as Raju-Newman's equation and ASME Sec. Xl approach. For these, three-dimensional finite-element analyses are performed to obtain the stress intensity factors for various surface cracks with t/R = 0.1. The approximation methods, incorporated in VINTIN (Vessel INTegrity analysis-INner flaws), utilizes the influence coefficients to calculate the stress intensity factor at the crack tip. This method has been compared with other solution methods including 3-D finite clement analysis for internal pressure, cooldown, and pressurized thermal shock loading conditions. The approximation solutions are within $\pm$2.5% of the those of FEA using symmetric model of one-forth of a vessel under pressure loading, and 1-3% higher under pressurized thermal shock condition. The analysis results confirm that the VINTIN method provides sufficiently accurate stress intensity factor values for axial semi-elliptical flaws on the surface of the reactor pressure vessel.