• 제목/요약/키워드: Thin Ring

검색결과 167건 처리시간 0.033초

반응성 동시 증착법에 의한 As-grown $YBa_2Cu_3O_{7-x}$ 박막의 결정 특성 및 표면형상에 관한 연구 (Crystalline Qualities and Surface Morphologies of As-Grown $YBa_2Cu_3O_{7-x}$ Thin Films on MgO(100) Substrate by Reactive Coevaporation Method)

  • 장호연;도부안광;토신전농;청수현사;추빈량삼;강본당일;송진태
    • 한국재료학회지
    • /
    • 제1권2호
    • /
    • pp.93-98
    • /
    • 1991
  • The as-grown $YBa_2Cu_3O_{7-x}$ superconducting thin films on MgO(100) substrate have been prepared by a reactive coevaporation method. The superconducting transition temperature, surface morphology and crystalline quality were examined as a function of the substrate temperature ranging from $450^{\circ}C$ to $590^{\circ}C$. From the reflection high energy electron diffraction (RHEED) analysis, it was found the film consisted of almost amorphous phase with a halo pattern deposited at the substrate temperature of $450^{\circ}C$. The film deposited at the substrate temperature of $510^{\circ}C$ consisted of polycrystalline phase, showing a broad ring pattern. On the other hand, for the film deposited at $590^{\circ}C$, RHEED showed spotty pattern indicating that this film consisted of single crystal phase. It has rough film surface due to the surface outgrowth. The surface outgrowth increased as the substrate temperature increased from $510^{\circ}C$ to $590^{\circ}C$. the surface outgrowth may be due to the anisotropic growth rate. The highest transition temperature obtained in this study was $Tc_{zero}$ of 83K with $Tc_{onset}$ of 88K for the film deposited at $590^{\circ}C$ using activated RF oxygen plasma.

  • PDF

다이아몬드 피복공구에 의한 SiC 강화 복합재료의 절삭특성 (Machining Characteristics of SiC reinforced Composite by multiple diamond-coated drills)

  • M. Chen;Lee, Y. M.;S. H. Yang;S. I. Jang
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.533-537
    • /
    • 2003
  • Compared to sintered polycrystalline diamond (PCD), the deposited thin film diamond has a great advantage on the fabrication of cutting tools with complex geometries such as drills. Because of high performance in high speed machining non-ferrous difficult-to-cut materials in the field of automobiles industry, aeronautics and astronautics industry, diamond-coated drills find large potentialities in commercial applications. However, the poor adhesion of the diamond film on the substrate and high surface roughness of the drill flute adversely affect the tool lift and machining quality and they become the main technical barriers for the successful development and commercialization of diamond-coated drills. In this paper, diamond thin films were deposited on the commercial WC-Co based drills by the electron aided hot filament chemical vapor deposition (EACVD). A new multiple coating technology based on changing gas pressure in different process stages was developed. The large triangular faceted diamond grains may have great contribution to the adhesive strength between the film and the substrate, and the overlapping ball like blocks consisted of nanometer sized diamond crystals may contribute much to the very low roughness of diamond film. Adhesive strength and quality of diamond film were evaluated by scanning electron microscope (SEM), atomic force microscope (AFM), Raman spectrum and drilling experiments. The ring-block tribological experiments were also conducted and the results revealed that the friction coefficient increased with the surface roughness of the diamond film. From a practical viewpoint, the cutting performances of diamond-coated drills were studied by drilling the SiC particles reinforced aluminum-matrix composite. The good adhesive strength and low surface roughness of flute were proved to be beneficial to the good chip evacuation and the decrease of thrust and consequently led to a prolonged tool lift and an improved machining quality. The wear mechanism of diamond-coated drills is the abrasive mechanical attrition.

  • PDF

고추잠자리의 精子完成의 電子顯微鏡的 硏究 (An Electron Microscopy of Spermiogenesis in the Dragonfly, Crocothemis servilia Drury)

  • 백경기;최춘근;이국범
    • 한국동물학회지
    • /
    • 제15권3호
    • /
    • pp.133-147
    • /
    • 1972
  • 고추잠자리(Crocothemis servilia Drury)의 精子完成過程을 究明하기 爲하여, 本 硏究에 着手한 바, 다른 無脊椎動物의 精子完成過程에서 이미 밝혀진 構造들과 比較해 가면서 特殊한 分化相을 觀察한 結果, 첫째 核의 染色質이 漸次 濃縮되기 始作함에 따라서 核의 모양도 球形에서 楕圓形으로, 楕圓形에서 圓錐形으로 變하였으며 둘째로 核이 細胞의 一極端으로 移動하고 核의 尾部가 陷入되며 셋째 中心粒이 核 陷入 部位에 位置하여 여기에서부터 軸 가 形成된다. 넷째는 골지體에서 起因된 尖體顆粒은 核의 先端으로 移動되어 결국 尖體를 形成하게 된다.

  • PDF

Three-dimensional analysis of the arrangement of microtubules of the outer segment in the ciliary-type photoreceptor cell in the Onchidium dorsal eye

  • Katagiri, Nobuko;Shimatani, Yuichi;Katagiri, Yasuo
    • Journal of Photoscience
    • /
    • 제9권2호
    • /
    • pp.284-286
    • /
    • 2002
  • The inverted retina of the Onchidium dorsal eye (DE) is composed only of ciliary-type photoreceptor cells (CC's). The outer segment (OS) of the CC is a concentric lamellar structure consisting of many modified ciliary membranes and stains positively with anti-$\beta$-tubulin antibody. Near the base of the OS there are about 30 basal bodies each connecting individually to a cilium. The cilia are rod-shaped at the base, progressing upwards to a flattened sheet-like shape with increasing surface area. Three-dimensional analysis on serial sections demonstrates the ladle-shape of a modified cilium. Many modified cilia wrap around each other like the leaves of a cabbage. Nine pairs of microtubules (MT's) are located regularly in a ring at the base of the cilium, gradually losing their regular arrangement towards the periphery, where they separate into two subgroups that are contained within two swollen portions of a modified cilium. Within the CC of the Onchidium DE, MT's in the modified cilium exist as two poles extending longitudinally in a thin expanded ciliary membrane. This arrangement may support the photoreceptive OS and serve to maintain its structural integrity.

  • PDF

다중 채널 전극의 제작 및 특성 평가 (Fabrication and Characterization of Multi-Channel Electrode Array (MEA))

  • 성락선;권광민;박정호
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제51권9호
    • /
    • pp.423-430
    • /
    • 2002
  • The fabrication and experimentation of multi-channel electrodes which enable detecting and recording of multi-site neuronal signals have been investigated. A multi-channel electrode array was fabricated by depositing 2000${\AA}$ thick Au layer on the 1000${\AA}$ thick Ti adhesion layer on a glass wafer. The metal paths were patterned by wet etching and passivated by depositing a PECVD silicon nitride insulation layer to prevent signals from intermixing or cross-talking. After placing a thin slice of rat cerebellar granule cell in the culture ring located in central portion of the multi-channel electrode plate, a neuronal signal from an electrode which is in contact with the cerebellar granule cell has been detected. It was found that the electrode impedance ranges 200㏀∼1㏁ and the impedance is not changed by cleaning with nitric acid. Also, the impedance is inversely proportion to the exposed electrode area and the cross-talk is negligible when the electrode spacing is bigger than 600$\mu\textrm{m}$. The amplitude and frequency of the measured action potential were 38㎷ and 2㎑, which are typical values. From the experimental results, the fabricated multi-channel electrode array proved to be suitable for multi-site neuronal signal detection for the analysis of a complicated cell network.

한국 소방복 실태에 관한 연구 (A Study on the Actual Condition of korean Firefighter's Protective Clothing)

  • 김의경;이미식
    • 한국의류학회지
    • /
    • 제21권1호
    • /
    • pp.93-103
    • /
    • 1997
  • The purpose of this study was to investigate the actual performance of Korean firefighter's clothing through comparisons with protective clothing used in the United State, surveys of firefighter's opinion, and experiments on the material used in Korean firefighter's clothing. The paper presents experimental results as well as ways to improve current standards. The major results are as follows: 1. Korean protective clothing is too thin and too heavy. Thicker, lighter, and more heat- resistant fabric and a lighter trim should be used. 2. Korean protective clothing is not very water-resistant. A Water-resistant outershell and an innerliner which are made of air permeable and water resistant fabric must be used. 3. Korean protective clothing's outershell and innerliner should be made of fabric that is more heat-resistant, flame-resistant, and chemical resistant. 4. Protective clothing should be more brightly colored and its reflective tape should have greater reflectivity to make firefighters more visible. 5. The fastner currently used in Korean protective clothing consists of Velcro, a button, and a D-ring which can not be opened and closed quickly. A better fastener would have just velcro and a zipper. 6. The uniform for Korean firefighters consists of only a protective coat and boots. Protective trousers should be added to the standard uniform. Also, a thermal harrier should be used in winter to protect firefighters from the cold. 7. Korean firefighters should be provided with their own personal sets of protective clothing to ensure a proper fit.

  • PDF

Characterization of Tomato spotted wilt virus from Paprika in Korea

  • Choi, Gug-Seoun;Kim, Jeong-Soo;Choi, Jang-Kyung;Kim, Jae-Hyun
    • The Plant Pathology Journal
    • /
    • 제20권4호
    • /
    • pp.297-301
    • /
    • 2004
  • A Tomato spotted wilt virus (TSWV-KP) was isolated from Paprika (Capsicum annuum var. grossum) showing necrosis spot on the leaves and malformation of the fruit in Yesan, Korea. The virus infected Chenopodium amaranticolor, C. quinoa, Petunia hybrida, Nicotiana glutunosa, Gomphrena globosa, and Physalis floridana. Ten plants including tomato were observed to have systemic TWSV-KP infection. The virus produced necrosis or necrotic ring spots on the inoculated leaves and mosaic, vein necrosis or death on the upper leaves of Datura stramonium, N. clevarandii, N. rustica, and N.tabacum cvs. Thin sections of the infected leaf tissue contained spherical to oval particles, a characteristic of a Tospovirus. The virion contained three molecules of genomic RNAs, which were approximately 9.0, 4.9 and 3.0 kb. The nucleocapsid (N) protein of the purified virion migrated as a single band with molecular weight of about 29 kDa in SDS-PAGE. The N gene of TSWV-KP showed 96.5-97.2% and 97.7-98.5% identities to the three different TSWV isolates of Genbank Database at the nucleotide and amino acid, respectively.

벤조사이오펜을 기초로 한 새로운 비대칭형 올리고머의 합성과 OTFT 특성 (Synthesis of Novel Asymmetric Oligomers Based on Benzothiophene and OTFT Characteristics)

  • 이동희;박종원;정대성;박찬;김윤희;권순기
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.129-129
    • /
    • 2010
  • The conjugated oligomers with rigid and fused-ring structures are of interest for the solution-processable organic thin film transistors (OTFTs) due to their well defined structure and high purity. In this study, alkyl substituted benzothiophene based oligomers were synthesized by a novel route, the key point of which is the acid-induced intermolecular cyclization reaction of aromatic methyl sulfoxides, and were confirmed by $^1H$-NMR and FT-IR studies. The obtained oligomers showed the good solubility in common organic solvents such as hexane, chloroform, and dimethylchloride at room-temperature, which is due to the introduced alkyl chain. The physical and optical properties of the oligomers were studied using differential scanning scalorimetry (DSC), cyclic-voltammetry (CV), UV-visible and PL spectra studies. Solution processed OTFT device based on synthesized oligomers show a high hole mobility of up to $0.01\;cm^2V^{-1}s^{-1}$, $I_{on}/I_{off}$ of $10^5$ and threshold voltage of -14V.

  • PDF

Use of In-Situ Optical Emission Spectroscopy for Leak Fault Detection and Classification in Plasma Etching

  • Lee, Ho Jae;Seo, Dong-Sun;May, Gary S.;Hong, Sang Jeen
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제13권4호
    • /
    • pp.395-401
    • /
    • 2013
  • In-situ optical emission spectroscopy (OES) is employed for leak detection in plasma etching system. A misprocessing is reported for significantly reduced silicon etch rate with chlorine gas, and OES is used as a supplementary sensor to analyze the gas phase species that reside in the process chamber. Potential cause of misprocessing reaches to chamber O-ring wear out, MFC leaks, and/or leak at gas delivery line, and experiments are performed to funnel down the potential of the cause. While monitoring the plasma chemistry of the process chamber using OES, the emission trace for nitrogen species is observed at the chlorine gas supply. No trace of nitrogen species is found in other than chlorine gas supply, and we found that the amount of chlorine gas is slightly fluctuating. We successfully found the root cause of the reported misprocessing which may jeopardize the quality of thin film processing. Based on a quantitative analysis of the amount of nitrogen observed in the chamber, we conclude that the source of the leak is the fitting of the chlorine mass flow controller with the amount of around 2-5 sccm.

Chemical Differentiation of CS and N2H+ in Starless Dense Cores

  • Kim, Shinyoung;Lee, Chang Won;Sohn, Jungjoo;Kim, Gwanjeong;Kim, Mi-Ryang
    • 천문학회보
    • /
    • 제43권1호
    • /
    • pp.45.2-45.2
    • /
    • 2018
  • CS molecule is known to be adsorbed onto dust in cold dense cores, causing its significant depletion in the center region of cores. This study is aimed to investigate the depletion of CS molecule with optically thin $C^{34}S$ molecular line observations, including significance of its differentiation depending on the evolutionary status of the dense cores. We mapped five evolved starless cores, L1544, L1552, L1689B, L694-2 and L1197 using two molecular lines, $C^{34}S$ (J=2-1) and $N_2H^+$ (J=1-0) with NRO 45 m telescope. The $H^2$ column density and temperature structures of each targets were obtained by SED fitting for Herschel continuum images and the internal number density profiles by model fitting. All of the integrated intensity maps of $C^{34}S$ show depletion holes and 'semi-ring-like' distribution, indicating that the depletion of CS is clear and general. The radial profiles of CS abundance also show significant decrease towards the core center, while $N_2H^+$ abundance is almost constant or enhanced. We find that the more evolved cores with higher $H^2$ density tend to have a stronger depletion of CS. Our data strongly support claims that CS molecule generally depletes out in the central regions of starless dense cores and such chemical differentiation is closely related to their evolution.

  • PDF