• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.271-277
• /
• 2000

Transparent $TiO_2$ thin films were prepared by the sol-gel method from titanium alkoxide aqueous solution containing large quantities of water. To prepare the aqueous system sol, the chelate compound solution were prepared from each 1 mole of titanium(IV)iso-propoxide, acetylacetone and 8 moles of isopropyl-alcohol. And then the 50 moles aqueous solution with the 0.02~0.50 moles of HCI for sol stability and the 0.3 mole of polyethylene glycol for coating adhesion were precisely dropped on the chelate compound solution. $TiO_2$thin films were fabricated by dip coating, drying and heat treatment at $400^{\circ}C$ and their characteristics were investigated by XRD, SEM and UV-visible spectrometer, The neutral sol of composition with TTIP : AcAc : IPA : $H_2O$ : PEG : HCl = 1 : 1 : 8 : 50 : 0.3 : 0.15 (molar ratio) was maintained stable sol condition and without problem for coating more than 30 days. The anatase phase $TiO_2$thin film prepared from 30 times dipping, drying and heat treating showed the flat surface and the fine microstructure of fracture surface with about 2 $\mu\textrm{m}$ thickness. Transparency of these $TiO_2$thin film was 80 % in the visible region.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.19-25
• /
• 2008

In this study, we fabricated Organic Thin Film Transistors(OTFTs) with $C_{60}$ hole injection layer between organic semiconductor(pentacene) and metal electrode, and we compared the electrical characteristics of OTFTs with/without $C_{60}$. When the $C_{60}$ hole injection layer was introduced, the mobility and the threshold voltage were improved from 0.298 $cm^2/V{\cdot}s$ and -13.3V to 0.452 $cm^2/V{\cdot}s$ and -10.8V, and the contact resistance was also reduced. When the $C_{60}$ is inserted, the hole injection was enhanced because the $C_{60}$ prevent the unwanted chemical reaction between pentacene and Au. Furthermore, we fabricated the OTFTs using Al as their electrodes. When the OTFTs were made by only aluminum electrode, the channel were not mostly made because of the high hole injection barrier between pentacene and aluminum, but when the $C_{60}$ layer with an optimal thickness was applied between aluminum and pentacene, the device performances were obviously enhanced because of the vacuum energy level shift of Al and the consequent decrease of the hole injection barrier which was induced by the interface dipole formation between $C_{60}$ and Al. The mobility and $I_{ON}/I_{OFF}$ current ratio of OTFT with $C_{60}/Al$ electrode were 0.165 $cm^2/V{\cdot}s$ and $1.4{\times}10^4$ which were comparable with the normal Au electrode OTFT.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1553-1558
• /
• 2012

This study was conducted to investigate the effects of stocking density or group size on feed intake, daily gain, and carcass characteristics of Hanwoo (Korean indigenous breed) steers reared from 7 months to 31 months of age. Thirty Hanwoo steers were divided into four groups with three replicates each (a total of 12 pens). In each group, one (G1), two (G2), three (G3), and four steers (G4) per pen were allocated as treatments. Pen size was $32.0m^2$, and therefore Hanwoo steers in G1, G2, G3, and G4 were reared under different space allowances, i.e. 32.0, 16.0, 10.6, and $8.0m^2$/steer, respectively. Steers were reared following a conventional beef cattle management method in Korea, and were offered a fixed amount of commercial concentrate with ad libitum forages. Results were subjected to analysis of variance with stocking density as the main effect, and significance was declared at p<0.05. Although total feed intake was not significantly altered, it numerically increased in animals of low stocking density (G1) compared to those subjected to high stocking density treatment (i.e. G4). Feed conversion ratio was higher (p<0.05) in G3 compared to G1 and G2. Animals in G1 (low stocking density) grew faster (p<0.05) than those of high stocking density (G3 and G4). Back fat thickness, meat yield index, and meat yield grade were similar among all levels of stocking density. However, longissimus muscle area was larger in G1 and G2 (p<0.01) compared to G3 and G4, and animals in G3 produced smaller carcasses (p<0.05). Carcass quality traits, including marbling score, meat color, fat color, texture, maturity and meat quality grade, as determined by a group of experts, were not significantly different among the treatments. In conclusion, lower stocking density resulted in increased feed efficiency, daily gain, and carcass weight in Hanwoo steers. However it remains unclear whether such differences are the results of stocking density or group size, or a combination of both. Nonetheless, these results confirm previous studies reporting a negative effect of increased stocking density on animal productivity. Further, animal welfare under an intensive farming system in relation to economical return is discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.10
• /
• pp.1599-1609
• /
• 2020

Objective: This study was designed to determine how feeding diets differing in crude protein (CP) and undegraded intake protein (UIP) levels affected productivity, blood metabolites, carcass characteristics, and the production economics of Hanwoo steers. Methods: Thirty-six Hanwoo steers (age = 8.2±0.5 mo; body weight = 254±16.1 kg) were assigned at random to one of three treatments (4 steers/pen; 3 pens/treatment): i) a low-CP diet (LP; control) containing 12.1% CP with 35.1% UIP, 12.0% CP with 36.8% UIP, and 12.9% CP with 48.8% UIP, in the growing, fattening, and finishing periods, respectively; ii) a high-CP, low-UIP diet (HPLU) containing 15.0% CP with 33.7% UIP, 14.0% CP with 35.7% UIP, and 13.1% CP with 46.7% UIP, respectively; and iii) a high-CP, high-UIP diet (HPHU) containing 15.0% CP with 45.8% UIP, 14.0% CP with 44.6% UIP, and 13.0% CP with 51.1% UIP, respectively. Results: The treatments did not affect feed intake and growth performance, except for average daily gain during the fattening period that tended to be the lowest (p = 0.08) in the HPLU-fed steers. The feed CP conversion ratio over the entire feeding period was higher with high-CP diets. The treatments did not affect most blood metabolites; however, blood cholesterol and low-density lipoprotein concentrations during the fattening and finishing periods were the lowest in steers fed a HPLU diet. The treatments had negligible effects on cold carcass weight, yield traits including longissimus muscle area, backfat thickness, yield index, and yield grade, plus quality traits including meat color, fat color, texture, and maturity. However, marbling score and frequency of carcass quality grade 1⁺⁺ were greater in HPHU-fed steers. Conclusion: Feeding diets with higher CP and UIP levels did not affect growth performance but tended to improve the carcass quality of Hanwoo steers, resulting in greater economic return.

• Composites Research
• /
• v.29 no.3
• /
• pp.117-124
• /
• 2016

The failure strength of composite single-lap joint repaired using scarf patch was investigated by test and finite element method. A total of 45 specimens were tested changing scarf ratio, stacking pattern, and defect size to study the failure strength and mode. Except for one case, all repaired specimens showed the equal or higher strength than the sound specimens and the effect of considered repair parameters was not remarkable. It was found through the failure mode inspection that the surface treatment for bonding was not enough in the case which failed at the lower load than the sound specimen. Three-dimensional finite element analysis was conducted to verify the test results. It was confirmed that the considered repair parameters do not significantly affect the stress distribution of the specimens. It was also observed that the applied tensile load is relieved passing through the overlapped region thickness of which is almost double. From this study, it is concluded that if the bonding procedure for adherends and patch including surface treatment for fabric layer is thoroughly followed, the strength of repaired single-lap joint can be restored up to the strength of sound one.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.203-208
• /
• 1999

An 8 week feeding trial was conducted with 864 ISA Brown laying hens, 48 weeks old, to determine if microbial phytase $(Natuphos^{(R)})$ supplementation can reduce non-phytate phosphorus (NPP) level in laying diets. The experiment consisted of four dietary treatments: T1, control diet with 0.26% NPP (0.55% total P) wand no supplementary phytase; T2, 0.21% NPP (0.50% total P) diet with 250 U of phytase/kg of diet; T3, 0.16% NPP (0.45% total P) diet with 250 U of phytase/kg of diet; and T4, 0.11% NPP (0.40% total P) diet with 250 U of phytase/kg of diet. T3 showed the highest egg production and egg weight and the lowest feed conversion while T4 gave the lowest egg production and the highest feed conversion and mortality. Daily feed consumption ranged from 130.4 g (T4) to 132.7 g (T2). T1 and T2 were not significantly different in the production parameters. Eggshell strength, egg specific gravity, and eggshell thickness were not significantly different among treatments. However, broken egg ratio was significantly lower in T2 and T4 than in T1. Retentions of Ca, P, Mg, and Cu were greater in phytase supplemented treatments (T2, T3, and T4) than the control (T1), and those in T3 and T4 were greater than in T2. Excretions of P in phytase supplemented treatments (T2, T3, and T4) were significantly (p<0.05) smaller than in T1 but excretions of N were not significantly different among the treatments. Contents of ash in tibiae were not significantly affected by treatments, but contents of Ca, P, Mg, and Zn was increased and that of Cu decreased by phytase supplementation. It is concluded that the NPP concentration in the diet of Brown layers consuming about 130 g/d of feed can be safely lowered from 0.26% (0.55% total P) to 0.16% (0.45% total P). The excretion of P was reduced by the inclusion of 250 U phytase/kg of diet.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.93-99
• /
• 2000

Treatment of shaving scrap, a chrome containing solid scrap generated by leather manufacturing process, has been so far depended on mainly incineration, soil landfill and ocean dumping, which give bad impact on environment and cause pollution. Shaving scrap generates from the mechanical work for controlling the final thickness of leather and its main components are collagen protein and pan of chromium compound. For the purpose of reusing this leather waste as resources, researches in connection with collagen fiber recovery, gelable protein recovery and liquid fertilizer is being speedily progressed. In the experiment, shaving scrap went through wet pulverizing treatment by physical and chemical methods. Then, making the leather sheet evenly, it is mixed with natural latex and every kind of binding materials in the container, and the mixtures were passed through experimental hydraulic press machine and applied to Fourdrinier machine respectively. Lastly, a test for fading out physical strength and properties of multiple-purpose of leather-like material was performed on a continuous leather sheet prepared by the experiment. In result, the physical strength and properties of leather-like material showed noticeable differences according to mixing ratio of binding materials, beating methods and the Ends of binding materials selected, and generally tear strength was the weakest property among others. Also, by the pilot scale experiment in sequence, it was possible to manufacture recycled goods made of soft and hard types of leather-like material with various performances.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.5
• /
• pp.531-538
• /
• 1993

A 4-week energy balance study was conducted to estimate the energy expenditure (EE) of 16 primary school age boys and girls, 8 to 12 year age, by measurement of energy intakes and changes in body energy (BE) content (intake / balance technique), keeping their normal living pattern and eating behavior. Gross energy intake (GE) and fecal energy (FE) loss was measured by bomb calorimetry. Urinary energy (UE) loss was calculated from nitrogen excreted. Fat mass (FM) was determined from body density estimated from skinfold thickness. Mean constitutional ratio of carbohydrate, protein and fat for the total energy intake was 10.1 $\pm$1.8%, 12.2$\pm$0.1% and 17.1$\pm$2.0% for the boys and 74.0$\pm$1.7%, 10.7$\pm$0.3% and 15.3$\pm$0.5% for the girls, respectively. Fecal energy loss was 5.1% and 4.5% proportion of the gross energy intake for the boys and girls, respectively. Mean daily metabolizable energy estimated by subtract feral and urinary energy loss was 1862$\pm$15kcal for the boys and 1627$\pm$20kcal for the girls. Total body energy change estimated from body composition change over 28 days was increased 1524$\pm$539kcal for the boys and 3622$\pm$718kcal for the girls. Mean daily energy expenditure was 1812$\pm$37kcal(52 $\pm$2kcal/kg of body weight) for the boys and 1487$\pm$25kca1 (52$\pm$2kcal/kg of body weight) for the girls.

• Nutritional Sciences
• /
• v.9 no.2
• /
• pp.92-96
• /
• 2006

Studies were carried out to determine the effect of feeding diet containing 5% canola oil on growth, feed efficiency, and fatty acid profile of bacon in finishing pigs and of longissimus muscle in horses fattening for meat production. In experiment 1, twenty cross-bred barrows and twenty cross-bred gilts (average weight, 80 kg) were blocked by sex and weight, and five barrows or five gilts were allotted to one of eight pens $(6.25m^2/pen)$, respectively. Four pens (two with barrows and two with gilts) randomly selected were assigned to a control diet containing 5% tallow and the remaining four pens to a diet containing 5% canola oil. The average daily weight gain, daily feed intake and feed efficiency over a 6-wk feeding period were not different (p>0.05) between the two diets, nor was backfat thickness. Fatty acid profile in bacon fat showed that the 0-3 fatty acid ($\alpha-linolenic$ acid) content in pigs fed diet containing 5% canola oil was approximately three times (P<0.01) as much as in pigs fed tallow. In experiment 2, thirty-two Jeju horses (average $weight{\pm}SE,\;244{\pm}5kg$) were blocked by sex and weight, and two horses of the same sex and similar body weight were allotted to one $(15m^2/pen)$ of eight pens. Eight pens (four with males and four with females) selected randomly were assigned to a control diet containing 5% tallow and the remaining eight pens to a diet containing 5% canola oil. The average daily weight gain, daily feed intake and feed efficiency for concentrates without roughages over a 5-month feeding period were not different (P>0.05) between the two diet groups. Fatty acid profile in the muscle fat showed that the 0-3 fatty acid (a-linolenic acid) content in horses fed diet containing 5% canola oil was approximately two times (P<0.01) that in horses fed tallow. The increased (P<0.01) 0-3 fatty acid content in pigs and horses fed canola oil decreased the ratio of n-6 to n-3 fatty acids compared to the control, indicating a significant improvement in pork and horsemeat fatty acid profile for health benefit. Our study demonstrated that feeding diet containing 5% canola oil may help produce pork and horsemeat with more health benefit, increasing their $\alpha-linolenic$ acid content without deleterious effects on growth of pigs and horses.

• Investigative Magnetic Resonance Imaging
• /
• v.11 no.1
• /
• pp.20-26
• /
• 2007

Purpose : The purpose of the present study was to develop and optimize solenoid coil for animal- model in 3 T MRI system and investigate and compare with the birdcage coil concerning the image quality with the various parameters such as SNR and Q-factor. Materials and Methods : Solenoid coil for animal-model was made on the acryl structure (diameter 4 cm, length 10 cm) 3 times-winding cooper tape of width 2 cm, thickness 0.05 cm and length 10 cm with 2 cm interval between winded tapes. Capacitors from 2 pF to 100 pF were used, and the solenoid coil was designed for receiver only coil. Results : SNR of the developed solenoid was 985 in CuSO4 0.7 g/L and 995 in rat experiment. Q-factor was 84-89 in unloaded condition and 203-206 in loaded condition. Conclusion : The resolution of the image obtained from solenoid was relatively higher than that of the conventional birdcage coil. In addition, the homogeneity of RF field by coil simulation was significantly excellent. The present study demonstrated that the solenoid coil could be useful to obtain small animal images with better contrast, resolution, visibility than images from birdcage.