• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.235-240
• /
• 2016

In this paper, a low-profile planar inverted-F antenna (PIFA) for ultrawideband (UWB) applications is proposed. The antenna consists of a PIFA and a ground plane with a slot. The addition of the slot not only improves the impedance matching of the PIFA but also forms an additional resonance. Therefore, the proposed antenna has a wideband characteristic covering the full UWB frequency range (3.1 GHz to 10.6 GHz) and a stable and nearly omnidirectional radiation pattern. The antenna also has a smaller volume and thickness compared to previous UWB PIFAs.

• 대한치과의사협회지
• /
• 제23권6호통권193호
• /
• pp.527-538
• /
• 1985

The purpose of this study is to evaluate the chronologic changes of the soft tissue profile in 6 to 11 years children. The author analyzed 174 cephalometric roentgenograms of 13 boys and 16 girls taken from the ages of 6 to 11 to assess the growth changes of the soft tissue profile. The results were obtained as follow: 1. Means, standard deviation and coefficient of variation of children were obtained. 2. Items which showed difference between males and females in longitudinal study were prn. Sn. A', and Ls that were greater than females variation. 3. With age, thickness of the soft tissue were increased except Ls. 4. Nasolabial angle and facial convexity had no significant change with age and sex.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.333-336
• /
• 2003

The current paper presents the design and implementation of a low-profile dc-to-dc converter developed as a power supply for the sustain driving circuit inside large-area wall-mount ac PDP application systems. Details on the design and implementation of a 500 W prototype dc-to-dc converter, miniaturized within a 230 $mm{\times}130$ mm area with a thickness of 25 mm while still achieving a 95 % conversion efficiency, are presented to demonstrate the feasibility and application potentials of the proposed low-profile dc-to-dc converter.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.211-213
• /
• 2002

The purpose of this work is acquiring some parameters of therapeutic heavy ion beams after penetrating a thick target. The experiments were performed using a pencil-like $\^$12/C beam of about 3 mm in diameter from NIRS-HIMAC, and the data were taken at several points of the target thickness for $\^$12/C beam of 290 MeV/u and 400 MeV/u. By the simultaneous measurements using some detectors, the atomic number of each fragment particle was identified, and the beam profile, the dose distribution and the LET spectrum for each element were derived.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.304-306
• /
• 2006

Positioning the workpiece accurately and preventing the weld distortion, tack welding is often performed before main welding in the construction of welded structures. The weld bead size of the tack weld is determined according to the workpiece thickness, weld length, weld joint type etc. However, this tack weld deteriorates the final weld bead profile, so that the grinding process is usually adopted for the uniform weld bead profile. In this study, an experimental method for the selection of optimal welding condition was proposed in the fillet weld which was done over the tack weld. This method uses the response surface analysis in which the leg length and the reinforcement height of weld bead were chosen as the quality variables of weld bead profile. The overall desirability function, which was combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. From the result, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.413-415
• /
• 1994

In this paper, a new technique for quantitative estimation of the stress profile along the depth of $p^+$ silicon films is presented. The $p^+$ silicon cantilevers with various beam thickness and a rotating beam supported by two cantilevers are used for estimating the stress profile of the films. The average of the residual stress distribution is estimated to be 50MPa. Most of $p^+$ silicon films are subjected to the tensile stress, except the region near the frontside.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• 대한치과교정학회지
• /
• 제19권1호
• /
• pp.7-20
• /
• 1989

A serial cephalometric study was undertaken to define the growth of the soft tissue facial profile in Korean children. The sample was composed of 25 males and 15 females for whom yearly cephalometric records were taken from the ages of 6 to 13 years. From the tracings, points on skeletal and soft tissue profiles were located and recorded on magnetic tape utilizing a Calcomp Talos RP660 X-Y digitizer. Linear and angular measurements of soft tissues were made directly from tape in a Cyber 174-16 computer after cephalometric enlargement had been corrected. A statistical evaluation was made of the data and the average profile diagrams in male and female were described by a Calcomp 960 pen plotter. On the basis of the findings of this study, the following trends were established. 1. The most prominent growth in soft tissue facial profile thickness was the nose and the least was the forehead. 2. The general growth direction of the soft facial tissue to the cranium described the downward and forward. 3. The degree of soft tissue facial convexity was decidely more than that exhibited earlier in life even though the soft tissue chin had protruded to the cranium. 4. The measurements indicated a general tendency for males to have larger nose and more convex and long soft tissue facial profile than did females. 5. Males showed significantly more growth than females in base of the upper lip and height of the upper anterior facial profile. 6. There was a difference between males and females in the rates of soft tissue facial profile growth. 7. Korean children showed less convex in the soft tissue profile convexity than did American children.

• 대한치과교정학회지
• /
• 제42권1호
• /
• pp.23-31
• /
• 2012

Objective: The purpose of this study was to determine the soft tissue thickness of male and female orthodontic patients with different skeletal malocclusions. Methods: Soft tissue thickness measurements were made on lateral cephalometric radiographs of 180 healthy orthodontic patients with different skeletal malocclusions (Class I: 60 subjects, Class II: 60 subjects, Class III: 60 subjects). Ten measurements were analyzed. For statistical evaluation, one-way ANOVA and Kruskal-Wallis tests were performed. Least significant difference (LSD) and Dunnet T3 post hoc tests were used to determine the individual differences. Results: Soft tissue thicknesses were found to be greater for men than for women. Statistically significant differences among the skeletal groups were found in both men and women at the following sites: labrale superius, stomion, and labrale inferius. The thickness at the labrale superius and stomion points in each skeletal type was the greatest in Class III for both men and women. On the other hand, at the labrale inferius point, for both men and women, soft tissue depth was the least in Class III and the greatest in Class II. Conclusions: Soft tissue thickness differences among skeletal malocclusions were observed at the labrale superius, stomion, and labrale inferius sites for both men and women.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.419-426
• /
• 2004

A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the loss mechanism in a low-speed axial compressor operating at the design condition(${\phi}=85\%$) and near stall condition(${\phi}=65\%$). At the design condition, the flow phenomena such as the tip leakage flow and hub comer stall are similar independent of the inlet boundary layer thickness. However, when the axial compressor is operating at the near stall condition, the large separation on the suction surface near the casing is induced by the tip leakage flow and the boundary layer on the blade for thin inlet boundary layer but the hub corner stall is enlarged for thick inlet boundary layer. These differences of internal flows induced by change of the boundary layer thickness on the casing and hub enable loss distributions of total pressure to be altered. When the axial compressor has thin inlet boundary layer, the total pressure loss is increased at regions near both casing and tip but decreased in the core flow region. In order to analyze effects of inlet boundary layer thickness on total loss in detail, using Denton's loss models, total loss is scrutinized through three major loss categories in a subsonic axial compressor such as profile loss, tip leakage loss and endwall loss.