• 한국압력기기공학회 논문집
• /
• 제7권2호
• /
• pp.42-47
• /
• 2011

The purpose of this study is to investigate the effects of through thickness on the mechanical properties and microstructural features in Mod. 9Cr-1Mo steels for RPVs. The microstructures at all locations were typically tempered martensite, but small amount of delta ferrite was observed at the center region. The prior austenite grain size increased with the depth from the surface. The yield strengths of center and 1/4T location were higher than that of surface by 30MPa. The impact toughness of center was low compared to those of other specimens. Also, upper shelf energy was low at the center. The toughness deterioration in center might be caused by larger size of the prior austenite grains and existence of the delta ferrite.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.162.6-162
• /
• 2001

Confocal scanning microscopy (CSM) is an important instrument in a wide variety of imaging applications because of its ability to provide three-dimensional images of thick, volume specimens. The mechanism for two-dimensional beam scanning and optical sectioning has an important roe in CSM as the three-dimensional profiler. This optical sectioning property arises from the use of a point detector, which serves to attenuate the signals from out-of-focus. The intensity profile for the open loop scanning should be matched with its response for the standard. The non-linearity can be minimized with the optical sectioning or the optical probe of the closed loop control. This paper shows the mathematical expression of the light such as the extinction curve in the optical fields of system using AO deflector, the axial/lateral response experimentally when the error sources change, and the methods of optical sectioning. Thorough design of optical sectioner is crucial to the success of CSM in the field ...

• Structural Engineering and Mechanics
• /
• 제30권3호
• /
• pp.263-278
• /
• 2008

Structural pipe-in-pipe cross-sections have significant potential for application in offshore oil and gas production systems because of their property that combines insulation performance with structural strength in an integrated way. Such cross-sections comprise inner and outer thin walled pipes with the annulus between them fully filled by a selectable thick filler material to impart an appropriate combination of properties. Structural pipe-in-pipe cross-sections can exhibit several different collapse mechanisms and the basis of the preferential occurrence of one over others is of interest. This paper presents an elastic analyses of a structural pipe-in-pipe cross-section when subjected to external hydrostatic pressure. It formulates and solves the static and elastic buckling problem using the variational principle of minimum potential energy. The paper also investigates a simplified formulation of the problem where the outer pipe and its contact with the filler material is considered as a 'pipe on an elastic foundation'. Results are presented to show the variation of elastic buckling pressure with the relative elastic modulus of the filler and pipe materials, the filler thickness and the thicknesses of the inner and outer pipes. The range of applicability of the simplified 'pipe on an elastic foundation' analysis is also presented. A brief review of the types of materials that could be used as the filler is combined with the results of the analysis to draw conclusions about elastic buckling behaviour of structural pipe-in-pipe cross-sections.

• Applied Microscopy
• /
• 제51권
• /
• pp.3.1-3.6
• /
• 2021

We examined the morphology of fertilized egg and ultrastructures of fertilized egg envelopes of dwarf rainbowfish (Melanotaenia praecox) belong to Melanotaeniidae using light and electron microscopes. The fertilized eggs were spherical with adhesive filament, transparent, demersal, and had a narrow perivitelline space and small oil droplets. The size of fertilized egg was 1.02 ± 0.18 mm (n = 30), and there were two kinds of adhesive filament on the fertilized eggs. The long and thick (diameter 12.22 ± 0.52 ㎛, n = 20) adhesive filaments were only at the area of animal pole, and short and thin (diameter 1.99 ± 0.23 ㎛, n = 20) adhesive filaments were around the long filaments. A micropyle was conical shaped with adhesive filament and located near the animal pole of egg. The outer surface of fertilized egg was rough side. Also, the total thickness of the fertilized egg envelope was about 7.46 ± 0.41 ㎛ (n = 20), the fertilized egg envelope consisted of two layers, an inner lamellae layer and an outer layer with high electron-density. And the inner layer was 8 layers. Collectively, these morphological characteristics and adhesive property of fertilized egg with adhesive filaments, and ultrastructures of micropyle, outer surface, and section of fertilized egg envelope are showed species specificity.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.1-12
• /
• 2007

S45C steel has been widely used in industrial applications, such as crank shafts, gears, main spindles of machine tools, connecting rods, etc., because of its distinguished mechanical property. In the convention arc welding of S45C plates without heat treatments, it is possible for welding defects to take place, such as a void or a hot-crack, due to a high carbon composition of S45C. Laser welding process is widely used in the industrial field due to its numerous advantages: a small heat affected zone(HAZ), deep penetration, high welding speed, single-pass thick section capability, and small distortion after welding. The objective of this research works is to investigate the influence of the process parameters, such as power of laser and welding speed, on the characteristics of laser welding for the case of nickel coated and nickel uncoated S45C steel. As the result of the experiment, in case of butt welding, nickel coated S45C steel has a uniform formation of welding zone and it was judged that the welding nature was better as inner defects and the quantity of spatter were formed relatively fewer than nickel uncoated S45C steel.

• 폴리머
• /
• 제36권1호
• /
• pp.59-64
• /
• 2012

제품의 소형화와 경량화 추세에 따라 부품의 두께가 얇아지는 경향이 있다. 이러한 소형 및 경량 제품의 중요한 설계요소는 소재의 충격강도이다. 충격강도는 재료 고유의 물성값으로 기하학적 형상에 의존하지 않고 일정한 값을 가져야 한다. 그러나 충격강도 시험 시 시편의 두께에 따라 강도의 차이를 보이고 노치(notch)의 생성방법과 노치형상에 따라서도 민감도를 보인다. 본 연구에서는 시편의 두께와 노치형상 및 노치의 생성방법에 따른 충격강도를 알아보았다. 또한 노치의 각도와 노치에 대한 충격 방향에 따른 충격강도도 관찰하였다. 이를 위해 엔지니어링 플라스틱인 PC, ABS, 그리고 POM에 대하여 Izod 충격시험을 수행하였다. 그 결과 실험한 모든 수지에서 두께가 얇아질수록 충격강도가 높아지는 경향을 보였는데 PC수지가 가장 크게 증가하였다. PC수지는 두께가 두꺼울 때는 취성파괴를 보였는데 두께가 얇을 때는 연성파괴 양상을 보였다. 몰드노치 시편이 밀링노치 시편에 비해 충격강도가 높았고, 역방향 노치가 정방향 노치보다 충격강도가 높았다. 본 연구에서 실험한 수지 중에서 노치의 민감성은 PC가 가장 컸으며 다음이 POM, ABS순으로 나타났다.