• Carbon letters
• /
• 제1권1호
• /
• pp.1-5
• /
• 2000

The effect of surface free energy on the positive temperature coefficient (PTC) of carbon black/thermoplastic resin composites was investigated. The thermoplastic resins such as EVA, LDPE, LLDPE and HDPE were used with the addition of 30 wt.% of the carbon black. The surface free energy of the composites was studied in the context of two-liquid contact angle measurements, i.e., deionized water and diiodomethane. It was observed that the resistivity on PTC composites Was greatly increased near the crystalline melting temperature, due to the thermal expansion of polymeric matrix. From the experimental results, it was proposed that the decrease of surface free energy induced by interactions between carbon black surfaces and polymer chains is an important factor to the fabrication of a PTC composite made of carbon black and polymeric matrix.

• 한국고분자학회지:고분자과학과기술
• /
• 제10권5호
• /
• pp.597-613
• /
• 1999

• 한국고분자학회지:고분자과학과기술
• /
• 제8권6호
• /
• pp.715-720
• /
• 1997

• 한국고분자학회지:고분자과학과기술
• /
• 제8권6호
• /
• pp.700-706
• /
• 1997

• 폴리머
• /
• 제38권5호
• /
• pp.596-601
• /
• 2014

방향족 구조를 포함하고 분자량이 조절된 polyamide(PA) 올리고머를 4-aminobenzoic acid와 12-aminododecanoic acid의 축합반응으로 합성하였다. 이 올리고머를 여러 분자량의 polytetramethylene glycol(PTMG)과 축합하여 PA를 hard segment로 하고 PTMG를 soft segment로 하는 열가소성 탄성체로서 poly(ether-b-amide)(PEBA)를 제조하였다. 합성된 PEBA의 구조는 FTIR과 $^1H$ NMR로 확인하였으며 DSC와 UTM을 사용하여 hard segment의 구조변화에 따른 열적특성과 기계적 성질의 변화를 비교해 본 결과 방향족 구조를 30%까지 포함할 때 결정성의 변화 없이 PEBA들의 용융온도는 높아졌고 초기 modulus와 strength는 더 크게 나타났다.

• Elastomers and Composites
• /
• 제32권3호
• /
• pp.157-165
• /
• 1997

The morphology of the thermoplastic vulcanizates prepared from ethylene-propylene-diene terpolymer, polypropylene and high density polyethylene(HDPE) or ethylene based ionomer were studied. Blends were prepared in a laboratory internal mixer where EPDM was cured in the presence of PP and HDPE or ionomer under shear with dicumyl peroxide(DCP). The effects of DCP concentration and rubber/plastics composition were studied. In the morphological analysis by scanning electron microscopy (SEM), a small amount of EPDM acted as a compatibilizer to HDPE and PP. It was also revealed that the dynamic vulcanization process could reduce the domain size of the crosslinked EPDM phase. When ionomer was added to EPDM/PP blend, the thermoplastic vulcanizate showed typical ductile fracture topology and the trend was more clearly observed when DCP contents and ionomer contents are higher.

• 폴리머
• /
• 제35권6호
• /
• pp.580-585
• /
• 2011

본 연구는 석유유래 생분해성 고분자인 poly(butylene adipate-co-succinate-co-terephthalate)(PBAST)의 생분해도와 친환경성을 높이기 위하여 변형 열가소성 전분(CMPS, chemically modified thermoplastic starch)을 첨가하였다. CMPS는 천연고분자인 전분을 가소제, maleic anhydride(MA) 및 반응개시제로 반응시켜 제조한 일종의 식물유래 생분해성 수지이다. PBAST/CMPS 블렌드의 파단면 사진으로부터 PBAST와 CMPS 상이 분리된 비혼화성 (immiscible blend) 블렌드이지만 상 사이의 계면 형상이 좋은 상용성 블렌드임을 알 수 있었다. 인장강도와 연신율은 CMPS 함량이 증가함에 따라 감소하였지만 탄성률은 증가하였다. 블렌드의 생분해도는 순수 PBAST에 비해 매우 높았고 CMPS의 함량이 증가함에 따라 증가하였다.

• Elastomers and Composites
• /
• 제38권1호
• /
• pp.27-37
• /
• 2003

This work presents a comparative study of the morphology and structure related properties of thermoplastic elastomer blends based on SEBS/PP/Oil and dynamically vulcanized EPDM/PP/Oil. A combination of ruthenium oxide staining and low voltage scanning electron microscopy (LVSEM) was found to be suitable for the study of morphology of these highly oil extended blends. h close analogy was found in the mechanical, thermal and rheological properties of the two systems made in an internal Brabender mixer and co-rotating turin screw extruder. The morphology of the blends, as made by the two techniques, was found to be significantly different. In the case of TPVs, the blonds made in the extruder had smaller EPDM domains and better tensile properties. In the case of SEBS, the blends made in the Brabender had more co-continuous phases and showed better tensile properties. Crystallization behavior of the isotactic polypropylene in the blends was found to be influenced by the type of rubber. Blends of SEBS/PP crystallized at a lower temperature than the TPVs. These differences were probably caused by differences in the nucleating ability of the two rubbers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.882-885
• /
• 2001

This paper aims to investigate the characteristics of braided thermoplastic composite and pressure relief for polymer arrester. In general, braided composite has potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was decided. And polymer arrester module was manufactured with braid.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1719-1722
• /
• 2006

We proposed a soft-lithographic method for aligning a liquid crystal (LC) in patterned azimuthal orientations. It is demonstrated that a thermoplastic polystyrene layer is patterned from a thermally stable polyimide layer via pressure-assisted capillary force lithography, which provides multidirectional LC alignment condition simply followed by a unidirectional rubbing process.