• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.289-292
• /
• 2005

Because of accumulation of operation time, the performance of main components(compressor, combustor, turbine, etc.) come to be deteriorated in gas-turbine engine. So, high reliability and minimun of expense are important problem for engine manufacturer and user in operation of gas-turbine engine. In this study, the diagnostic code of the engine performance using the thermodynamic sensitivity between the sensed parameters and the health parameters has been developed without an application of the commercial program. The single performance deterioration of the turbo-shaft engine has been estimated with this code.

• Journal of the Korean Chemical Society
• /
• v.61 no.3
• /
• pp.89-96
• /
• 2017

This study proposed adsorption of Pb(II) ions from aqueous solution using activated carbon prepared from areca catechu shell (ACS AC) using Timphan Method. The effects of independent variables on adsorption kinetic and isotherm have been investigated by conducting experiments in batch mode at neutral pH. The structural characterization of adsorbent was done by FT-IR and SEM analysis. The Pb(II) adsorption was correlated very well with the pseudo second-order kinetic (PSOKM) and Langmuir isotherm models (LIM). Increasing NaOH mass for activation and adsorption temperature increased weakly all the parameters of adsorption kinetic and isotherm. The Pb(II) ions adsorption capacity of the ACS AC at 27 and $45^{\circ}C$ was 50.51 and 55.25 mg/g, respectively. Thermodynamic parameters were determined, and the results confirmed the Pb(II) ions adsorption should be endothermic and spontaneous process, and both physical and chemical adsorption should be taken place.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.25-29
• /
• 1986

The reaction of cysteine with cinnamaldehyde have been studied kinetically and thermodynamically. It was found that the reaction proceeds in two steps; formation of the monoadduct by a Michael type addition followed by the nucleophilic attack of the second cysteine to the carbonyl carbon of the monoadduct to afford the thiazolidine derivative. A reaction profile for the reaction of cysteine with cinnamaldehyde was constructed based on the thermodynamic parameters analyzed for the forward and the reverse reactions. It was assumed that the second step of this reaction accompanies an intermediate, a Schiff base.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.204-210
• /
• 1986

It is shown that the linear stability coincides with the thermodynamic stability in the case of stress tensor evolution for simple dense fluids even if the constitutive (evolution) equation for the stress tensor is nolinear. The domain of coincidence can be defined in the space of parameters appearing in the constitutive equation and we find the domain is confined in an elliptical cone in a three-dimensional parameter space. The corresponding state theory in rheology of simple dense fluids is also further examined. The validity of the idea is strengthened by the examination.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.09a
• /
• pp.1-20
• /
• 1998

Processing of thin films by chemical vapor deposition (CVD) is accompanied by chemical reactions, in which the rigorous kinetic analysis is difficult to achieve. In these conditions, thermodynamic calculation leads to better understanding of the CVD process and helps to optimise the experimental parameters to obtain a desired product. A CVD phase diagram has been used as guide lines for the process. By determining the effect of each process variable on the driving force for deposition, the thermodynamic limit for the substrate temperature that diamond can deposit is calculated in the C-H system by assuming that the limit is defined by the CVD diamond phase diagram. The addition of iso-supersaturation ratio lines to the CVD phase diagram in the Si-Cl-H system provides additional information about the effects of CVD process variables.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.70-75
• /
• 2000

In this paper a new constitutive model for ductile materials was proposed. This model can describe the material degradation due to the evolution of isotropic damage during elasto-platic deformation. The plastic flow rule was derived under the framework of thermodynamic approach of continuum damage mechanics(CDM) in which plastic strain hardening parameters and isotropic damage were taken as thermodynamic state variables. And the process to determine material constants for constitutive model using an experimental data was presented.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.29-32
• /
• 2002

Thermodynamics of copolymerization is one of the fundamental elements for studying the effects of copolymerization parameters on the copolymer characteristics. Up until now, it has not been easy work not because there are not effective models but because the known thermodynamic values are limited to some copolymer pairs. Recently, owing to the development of molecular modeling methods, some thermodynamic parameters can be calculated and estimated on computer. (omitted)

• Textile Coloration and Finishing
• /
• v.9 no.3
• /
• pp.27-32
• /
• 1997

Two poly(4-vinylpyridines) having different degree of crosslinking were prepared by radical copolymerization of 4-vinylpyridine with N, N'-tetramethylenebis-acrylamide as a crosslinker. The abilities of these crosslinked polymers to bind acid dyes (methyl orange, ethyl orange, and propyl orange) were investigated at various temperatures in ethylene glycol as the binding medium. From the equilibrium amounts, the first binding constants and thermodynamic parameters for the bindings were evaluated. The first binding constants and thermodynamic parameters were not varied with these dyes. This result indicates that there is no hydrophobic interaction between the crosslinked polymers and the dyes in ethylene glycol. However, the first binding constants showed bell-shaped curves againtst the binding temperatures. This result could be explained in terms of the crosslinked hole size with temperature variation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.109-117
• /
• 2004

We synthesized energetic prepolymer(2-nitrato ethyl oxirane, NEO) for plastic-bonded explosive and measured its thermodynamic parameters. 2-Nitrato ethyl oxirane(NEO) as a monomer was synthesized from 4-butene-ol, the first-step was preparation of 1-nitrate-3-butene and second-step was synthesized 2-nitrate-ethyl oxirane from 1nitrate-3-butene and then polymerized by cationic ring opening polymerization. The unreacted monomer concentration was measured by GC. The thermodynamic parameters were obtained from the ceiling temperature(Tc) values of 1 mole monomer at each reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of perpolymer(NEO). Number average molecular weight(Mn), polydispersity(PD), and glass transition temperature(Tg), viscosity of prepolymer(NEO) were 2000, 1.07, $-55^{\circ}C$ and 300 poise respectively.