• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.120-128
• /
• 1997

The variations of the temperature field in a passenger compartment were measured by using a HSI true color image processing system and TLC(Thermochromic Liquid Crystal) solution. This temperature measurement technique was proved to be useful for analyzing the ventilation flow. The flow field in the passenger compartment was visualized using a particle streak method with pulsed laser light sheet. The temperature field and flow field in the passenger copartment were affected significantly by the ventilation mode. The panel-vent mode heating had shorter elapse time to reach a uniform temperature than the foot-vent mode under the same ventilation condition and nonuniformity inside the passenger compartment could be minimized effectively by using the bilevel heating mode. The temperature increase rate in the rear passenger compartment was iower than the front compartment, especially in the vicinity of the rear seat occupants' knee level.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1114-1122
• /
• 1996

Variation of temperature field in a Hele-Shaw convection cell was measured by using a HSI true color image processing system and TLC(Thermochromic Liquid Crystal) solution. The relationship between the hue value of TLC color image and real temperature was obtained and this calibration result was used to measure the true temperature. The temperature field in the Hele-Shaw convection cell shows periodic characteristics of 45 sec at Ra = 9.3 * 10$\^$6/. The temperature field measurement technique developed in this study was proved to be a useful and powerful tool for analyzing the unsteady thermal fluid flows.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.238-242
• /
• 2021

In this paper, we present an in line plastic-optical-fiber (POF) temperature sensor based on intensity modulation. The in line POF temperature sensor is composed of a POF, including an in-fiber micro hole filled with reversible thermochromic material, the transmittance of which depends on temperature. The reversible thermochromic material was cobalt chloride/polyvinyl butyral gel. A cobalt chloride solution of concentration 30.8 mM was formulated using 10% water/90% ethanol (v/v) solution, and gelled by dissolving polyvinyl butyral in this solution. Four types of in line POF sensors, with in line micro holes of four different diameters, were fabricated to measure temperature in the range of 25 to 75 ℃. The output optical power of all of these in line POF temperature sensors was inversely proportional to the temperature; the relation between output power and temperature was approximately linear, and the sensitivity was proportional to the diameter of the in-fiber micro hole. The experimental results indicate that an in line POF sensor can be used effectively for measuring moderate temperatures.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1995년도 추계 학술발표 강연 및 논문개요집
• /
• pp.68-68
• /
• 1995

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.123-123
• /
• 1993

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1994년도 춘계 학술발표 강연 및 논문 개요집
• /
• pp.90-90
• /
• 1994

• 센서학회지
• /
• 제18권6호
• /
• pp.467-474
• /
• 2009

In this study, we describe the feasibility of developing a fiber-optic temperature sensor using a thermochromic material such as 2,4,5-triphenylimidazole or also called Lophine. A sensor-tip is fabricated by mixing of a Lophine powder, which has a non-toxic and hydrophobic characteristics, and an epoxy resin. The temperature change in the sensor-tip gives rise to a change in the optical absorbance of the Lophine, and the transmittance of a light through the Lophine is also changed. We have measured the intensities of modulated lights due to the change of optical absorbance of the Lophine by using of a photo-multiplier tube(PMT). The relationships between the temperatures and the output voltages of PMT are determined to measure the temperature of water. The measurable temperature range of the fiber-optic sensor is from 5 to $30^{\circ}C$.

• 자원리싸이클링
• /
• 제26권5호
• /
• pp.61-66
• /
• 2017

이산화바나듐은 적외선 투과를 차단하거나 창을 통해 건물 내부열 손실을 막아주는 광선택적 유리코팅 소재로 알려졌는데, 본 연구에서 이와 같은 열변색 특성을 가진 이산화바나듐을 수소와의 환원반응을 통하여 제조하는 방법에 대해 연구하였다. 환원반응에 의한 이산화바나듐의 제조는 반응이 쉽게 진행되고, 스퍼터, 빔 증발기 등과 같은 반도체 장비가 필요 없이 공정이 단순하고 대량생산에 용이한 장점을 갖고 있는데, 본 연구에서 수소와의 환원반응에 대한 반응온도, 반응시간, 환원가스의 농도 및 사후 열처리 조건, 첨가제로서 텅스텐의 첨가 등에 대해 실험을 수행하였으며, 최적조건을 도출하여 제조된 이산화바나듐 분말의 특성과 열변색 특성에 대해 조사하였다. 본 연구를 통해 개발된 이산화바나듐이 전자소재 및 에너지 저감 소재로서 많이 활용될 것으로 기대되고 있다.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.441-444
• /
• 2009

• Macromolecular Research
• /
• 제15권5호
• /
• pp.478-481
• /
• 2007